Objective: Orthognathic surgery is an effective method to correct the dentomaxillofacial deformities. The aim of the study is to introduce the robot-assisted orthognathic surgery and demonstrate the accuracy and feasibility of robot-assisted osteotomy in transferring the preoperative virtual surgical planning (VSP) into the intraoperative phase. Methods: The CMF robot system, a craniomaxillofacial surgical robot system was developed, consisted of a robotic arm with 6 degrees of freedom, a self-developed end-effector, and an optical localizer. The individualized end-effector was installed with reciprocating saw so that it could perform osteotomy. The study included control and experimental groups. In control group, under the guidance of navigation system, surgeon performed the osteotomies on 3 skull models. In experimental group, according to the preoperative VSP, the robot completed the osteotomies on 3 skull models automatically with assistance of navigation. Statistical analysis was carried out to evaluate the accuracy and feasibility of robot-assisted orthognathic surgery and compare the errors between robot-assisted automatic osteotomy and navigation-assisted manual osteotomy. Results: All the osteotomies were successfully completed. The overall osteotomy error was 1.07 +/- 0.19 mm in the control group, and 1.12 +/- 0.20 mm in the experimental group. No significant difference in osteotomy errors was found in the robot-assisted osteotomy groups (P = 0.353). There was consistence of errors between robot-assisted automatic osteotomy and navigation-assisted manual osteotomy. Conclusion: In robot-assisted orthognathic surgery, the robot can complete an osteotomy according to the preoperative VSP and transfer a preoperative VSP into the actual surgical operation with good accuracy and feasibility.
Background: The purpose of this study was to identify the epidemiologic factors of panfacial fractures (PFs), and to evaluate the significance of anatomic PF categories and the Facial Injury Severity Scale (FISS) in classifying and standardizing panfacial injuries.Methods: A retrospective review of all patients treated with PFs at our institution between June 2010 and April 2021 was performed. PF was defined as a concurrent fracture in at least 3 of 4 facial subunits (frontal, upper midface, lower midface, and mandible). Data regarding patient demographics, causes of injury, location of fractures, major concomitant injuries, and postinjury complications were collected, and the FISS score was collected from each patient. Statistical analysis was performed using IBM SPSS Statistics version 22.0.Results: A total of 227 patients were enrolled. The most commonly fractured bones were the maxillary sinus wall (92.1%), mandible (82.8%), and zygomatic arch (75.3%), and the most common fracture sites in PFs were graphically presented. Four PF patterns were defined: FULM (n = 60), FUL (n = 39), ULM (n = 127), and FUM (n = 1). There was a significant association between PF patterns and sex (p = 0.018), the number of concomitant injuries (p = 0.014), and early surgical airway management (p = 0.003). Different PF patterns were significantly correlated with different types of concomitant injuries and complications. The FISS score showed a significant difference with PF patterns (p = 0.000) and sex (p = 0.007), and a FISS value of 11 or more is the appropriate cutoff for the prediction of multiple concomitant injuries and complications.Conclusions: Both the anatomic PF categories and FISS were significantly correlated with various concomitant injuries and complications. The combination of PF categories and FISS provided a better positive and negative prediction of concomitant injuries and complications for PF patients. Patients with FULM and FISS > 11 had an obviously higher proportion of the need for multiprofessional treatment.
Numerous problems regarding craniomaxillofacial navigation surgery are not well understood. In this study, we performed a double-center clinical study to quantitatively evaluate the characteristics of our navigation system and experience in craniomaxillofacial navigation surgery. Fifty-six patients with craniomaxillofacial disease were included and randomly divided into experimental (using our AccuNavi-A system) and control (using Strker system) groups to compare the surgical effects. The results revealed that the average pre-operative planning time was 32.32 mins vs 29.74 mins between the experimental and control group, respectively (p > 0.05). The average operative time was 295.61 mins vs 233.56 mins (p > 0.05). The point registration orientation accuracy was 0.83 mm vs 0.92 mm. The maximal average preoperative navigation orientation accuracy was 1.03 mm vs 1.17 mm. The maximal average persistent navigation orientation accuracy was 1.15 mm vs 0.09 mm. The maximal average navigation orientation accuracy after registration recovery was 1.15 mm vs 1.39 mm between the experimental and control group. All patients healed and their function and profile improved. These findings demonstrate that although surgeons should consider the patients’ time and monetary costs, our qualified navigation surgery system and experience could offer an accurate guide during a variety of craniomaxillofacial surgeries.
30 November 2021 in Frontiers in Bioengineering and Biotechnology
Nowadays, 3D printing technology has been applied in dentistry to fabricate customized implants. However, the biological performance is unsatisfactory. Polydopamine (PDA) has been used to immobilize bioactive agents on implant surfaces to endow them with multiple properties, such as anti-infection and pro-osteogenesis, benefiting rapid osseointegration. Herein, we fabricated a PDA coating on a 3D-printed implant surface (3D-PDA) via the in situ polymerization method. Then the 3D-PDA implants’ pro-osteogenesis capacity and the osseointegration performance were evaluated in comparison with the 3D group. The in vitro results revealed that the PDA coating modification increased the hydrophilicity of the implants, promoting the improvement of the adhesion, propagation, and osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) in vitro. Additionally, the 3D-PDA implant improved osteointegration performance in vivo. The present study suggested that PDA coating might be a feasible strategy to optimize 3D-printed implant surfaces, making a preliminary research basis for the subsequent work to immobilize bioactive factors on the 3D-printed implant surface.