Thin-layer chromatography (TLC) is commonly used as a screening method to verify the identity and quality of dried herbal medicinal plant material. While TLC is relatively simple, the method still requires technical experience and relies on the subjective classification of sample TLC profiles as “within-specifications” or “off-specifications.” In this work, we report the development of an objective TLC-based system for the identification and quality assessment of herbal medicinal materials. Our proposed system is a miniaturized Pharmacopeia-based TLC method coupled with a smartphone app that allows for an objective interpretation of TLC profiles via multivariate image analysis and chemometric fingerprinting. An image of the TLC profile is captured using a smartphone camera interfaced with a 3D-printed photo-box, and the analysis is automated using a framework of pre-uploaded algorithms hosted on a cloud server. The TLC profile image is converted to an unfolded red, green, and blue (RGB) channel intensity profile, and classified as “within-specifications” or “off-specifications” using aggregated Soft Independent Modeling of Class Analogy (SIMCA) models. We present the application of our system to two herbal medicinal plants, Blumea balsamifera and Vitex negundo. The proposed system demonstrates 90.2% sensitivity and 86.2% specificity for B. balsamifera classification, and 81.4% sensitivity and 92.0% specificity for V. negundo classification when compared to the respective laboratory-based Pharmacopeia TLC protocols for the ability to distinguish authentic samples from non-authentic and degraded samples. The system developed in this work is a cost-effective, rapid method that can serve as a herbal material quality assessment tool in resource-limited settings.
12 April 2024 in Journal of Food Science and Technology
Fused filament fabrication (FFF) is a 3D printing method that is attracting increased interest in the development of miniaturized electrochemical sensor systems due to its versatility, low cost, reproducibility, and capability for rapid prototyping. A key component of miniaturized electrochemical systems is the reference electrode (RE). However, reports of the fabrication of a true 3D-printed RE that exhibits stability to variations in the sample matrix remain limited. In this work, we report the development and characterization of a 3D-printed Ag|AgCl|gel-KCl reference electrode (3D-RE). The RE was constructed using a Ag|AgCl wire and agar-KCl layer housed in a watertight 3D-printed acrylonitrile butadiene styrene (ABS) casing. The novel feature of our electrode is a 3D-printed porous junction that protects the gel electrolyte layer from chloride ion leakage and test sample contamination while maintaining electrical contact with the sample solution. By tuning the 3D printing filament extrusion ratio (k), the porosity of the junction was adjusted to balance the reference electrode potential stability and impedance. The resulting 3D-RE demonstrated a stable potential, with a potential drift of 4.55 ± 0.46 mV over a 12-h period of continuous immersion in 0.1 M KCl, and a low impedance of 0.50 ± 0.11 kΩ. The 3D-RE was also insensitive to variations in the sample matrix and maintained a stable potential for at least 30 days under proper storage in 3 M KCl. We demonstrate the application of this 3D-RE in cyclic voltammetry and in pH sensing coupled with electrodeposited iridium oxide on a gold electrode. Our method offers a viable strategy for 3D printing a customizable true reference electrode that can be readily fabricated on demand and integrated into 3D-printed miniaturized electrochemical sensor systems.
The growing international demand for herbal-based products has prompted the need for more stringent quality control methods to detect substandard and adulterated herbal plant materials. However, most prescreening methods, such as thin-layer chromatography (TLC), remain inaccessible to herbal producers in resource-limited settings. Here, we report a proof-of-concept demonstration of a multi-stationary phase thin-layer chromatography (MSP-TLC) method for the preliminary on-site identification and evaluation of herbal materials. Our method is based on a unique TLC plate design that features multiple phenyl- and octyl-modified silica gel stationary phases configured as radial sectors. The modified stationary phase patterns were fabricated by screen-printing organosilane solutions onto commercial silica gel TLC plates. Radial elution with an ethanol–water mobile phase from the center of the MSP-TLC plate generates multiple chromatographic profiles simultaneously for a single sample extract. To facilitate the interpretation of the multiple TLC profiles, the MSP-TLC system was coupled with image analysis and chemometric pattern recognition to classify a sample as “within-specifications” or “off-specifications” for a given herbal plant species. Application of the system to Blumea balsamifera and Vitex negundo demonstrated sensitivity and specificity rates that range from 73.1 to 95.1% compared to the respective standard Pharmacopeia TLC methods. The presented method holds considerable promise as a cost-effective, user-friendly on-site prescreening tool for herbal materials in resource-limited settings.