The detection and evaluation of concealed mineral resources deep in metallic mines and in the surrounding areas remain technically difficult. In particular, due to the complex topographic and geomorphic conditions on the surface, the detection environments in these areas limit the choices of detection equipment and data collection devices. In this study, based on metallogenic theory and the metallogenic geological characteristics of banded iron formation (BIF)-type iron ores, equipment for surface geophysical surveys (i.e., the high-precision ground magnetic survey method, the transient electromagnetic method, and the magnetotelluric method) and data collection devices capable of taking single-point continuous measurements were employed to detect the concealed iron ore bodies in the transition zone CID-1 between the Hejia and Dumu iron deposits in the Gongchangling iron ore concentration area in the Anshan-Benxi area (Liaoyang, China), a representative area of BIF-type iron ores. The results showed that an optimal combination of these geophysical survey methods accurately determined the anomalous planar spatial locations and anomalous profile morphologies of the concealed iron ore bodies. On this basis, we determined their locations, burial depths, and scales. Two anomalous zones induced by concealed iron ore bodies, YC-1 and YC-2, were discovered in zone CID-1. Two concealed iron-bearing zones, one shallow (0–150 m) and one deep (300–450 m), were found in YC-1. A 100 m scale drilling test showed that the cumulative thickness of the shallow iron-bearing zone was over 23.6 m.
Research on wall rock alteration is of great importance to the understanding and exploration of ore deposits. The microscopic changes of the same mineral in different alteration zones can provide information about the migration and enrichment of ore-forming elements. In this paper, a typical profile of a high-grade iron ore body in Gongchangling iron deposit was investigated and sampled. The samples were checked by polarized microscopy, and alterations zonation were delineated according to the hydrothermal mineral assemblages and paragenesis. Moreover, hyperspectral images of wall rocks from each alteration zone were obtained by Norsk Elektro Optikk (NEO) HySpex-320 m imaging system. A customer Interactive Data Language (IDL) software package was used to process the images, and spectral features were extracted from the selected samples. The results indicate that spectral characteristics manifest obviously regular variations; i.e., from proximal to distal for the high-grade iron ore body, the wavelengths at ca. 1200 nm of chlorite and garnet, which accounts for most of the hydrothermal alteration minerals, become longer, and the absorption depths gradually smaller. The spectral features at 1200 nm of chlorite and garnet are always caused by the crystal field effect of Fe2+; therefore, the wavelength variations indicate the increase of Fe2+ and a reduced environment, which can provide more detailed information about the metallogeny and water–rock interaction. Since the hyperspectral features of the altered rocks can disclose unique mineralogical and structural information, the conventional classification of alteration zonation should be combined with the spectral feature, i.e., spectral alteration zonation, which is of great help to the understanding of the forming conditions of wall rock alteration and also the high-grade iron ore bodies.
In this study, organic polymer polyurethane grouting materials were prepared using isocyanate and polyether polyol as the main agents and various additives, the slurry coagulation process was investigated, and the mechanical properties of the polymer samples were tested to explore the influence of the density and soaking time of the polymer on the strength of the samples. The microstructure of the polymer was observed via electron microscopy, and relying on image analysis software, the structural parameters of the polymer cell were analyzed and calculated; the model equation between density and yield strength was established based on the strength model of porous materials developed by Gibson and Ashby. The results show that the initial viscosity and gel time of the polyurethane slurry decrease with the increase of the initial temperature, and the viscosity changes abruptly when the slurry reaches the gel point. The mechanical properties of the polymer increased with increasing density and decreased with increasing soaking time. The interior of the polymer is a porous structure and the pores are approximately spherical; the higher the density of the polymer material, the more uniform the stress distribution of the material, and the higher the percentage of the matrix, which in turn leads to better mechanical properties of the material. The diameter of the polymer cell is negatively correlated with the density, and the model established based on the microscopic parameters of the cell can better predict the yield strength of the polymer. This study helps to deepen the understanding of the microstructure and mechanical properties of polyurethane and provides a certain reference for the application of polyurethane in underground mine reinforcement engineering.
Polymer grouting materials are increasingly used in the filling of mine fissures. Unlike conventional inorganic grouting materials, the self-expansion of polymers adds complexity to their diffusion process within the crack. The objective of this research was to examine how polymer grouting material spreads in cracks at ambient temperatures and pressure. The investigation involved conducting grouting tests and performing numerical fluid simulation calculations using the finite-volume method in the computational fluid dynamics software, ANSYS FLUENT 2022 R1. The fluid volume approach was employed to determine the boundary between fluid and air and to ascertain the variation patterns of density in the slurry and the fracture system. This study applied the principles of fluid mechanics to investigate the patterns of variation in the physical characteristics of polymer grouting materials, including their density, pressure, flow velocity, and movement distance, during the diffusion process. The results indicated that the density of the polymer grouting material decreased exponentially over time throughout the diffusion process. With the increase in the grouting’s volume, the grout’s pressure and the permeable distance of the grout increased. The slurry’s pressure near the grouting hole exceeded the other points’ pressure. The physical parameters of the slurry were numerically simulated by ANSYS FLUENT 2022 R1 software, and the results were compared with the experimental data. After comparing the numerical simulation results with the test data, it was clear that the numerical simulation method was superior in accurately predicting the distribution pattern of each parameter of the polymer slurry during diffusion. The grouting volume, pressure distribution, and real-time change in the position of the flow of slurry could be efficiently determined through numerical calculation and simulated grouting tests. This work can offer valuable information for designing polymer grouting materials used in underground mine fissures.
6 May 2024 in Arabian Journal for Science and Engineering
The existence of fissures poses a serious threat to the safe production of underground mines, and this paper investigates a polymer grouting material for filling fissures in underground mines. To optimise the ratio of polymer grouting materials, this paper designed 16 test groups using the orthogonal test method to find the most reasonable slurry ratio. In order to study the gel diffusion process of polymer slurry in the fissure and to explore the changes of various parameters of the slurry after injection, simulated grouting tests were carried out, and the distribution laws of viscosity, pressure, and diffusion distance of the slurry were discussed. The findings indicate that when the proportion of ethylenediamine polypropylene oxide tetrol: glycerol polyether: catalyst: foam stabiliser is 10:8:0.5:0.4, the polymer grouting material has excellent compressive strength, and the maximum compressive strength can reach 12.31 MPa. Prior to reaching the gel time point, the viscosity of the polymer slurry was nearly constant, which is basically maintained at 0.772 Pa·s under normal temperature and pressure, but after reaching the gel time point, it abruptly rose. As the slurry mass increased, so did the penetration distance and pressure; in the simulated grouting test, when the slurry mass was 400 g, the maximum diffusion distance of the slurry reached 39 cm. Conversely, as the fracture pore size increased, the diffusion distance and pressure of the slurry decreased. Along the diffusion path, the slurry pressure progressively drops, but this change is not synchronised with the diffusion distance’s change. This work can serve as a reference for the configuration of polymer slurry and aid in comprehending the diffusion law of the slurry within the fissure.