The detection and evaluation of concealed mineral resources deep in metallic mines and in the surrounding areas remain technically difficult. In particular, due to the complex topographic and geomorphic conditions on the surface, the detection environments in these areas limit the choices of detection equipment and data collection devices. In this study, based on metallogenic theory and the metallogenic geological characteristics of banded iron formation (BIF)-type iron ores, equipment for surface geophysical surveys (i.e., the high-precision ground magnetic survey method, the transient electromagnetic method, and the magnetotelluric method) and data collection devices capable of taking single-point continuous measurements were employed to detect the concealed iron ore bodies in the transition zone CID-1 between the Hejia and Dumu iron deposits in the Gongchangling iron ore concentration area in the Anshan-Benxi area (Liaoyang, China), a representative area of BIF-type iron ores. The results showed that an optimal combination of these geophysical survey methods accurately determined the anomalous planar spatial locations and anomalous profile morphologies of the concealed iron ore bodies. On this basis, we determined their locations, burial depths, and scales. Two anomalous zones induced by concealed iron ore bodies, YC-1 and YC-2, were discovered in zone CID-1. Two concealed iron-bearing zones, one shallow (0–150 m) and one deep (300–450 m), were found in YC-1. A 100 m scale drilling test showed that the cumulative thickness of the shallow iron-bearing zone was over 23.6 m.
Research on wall rock alteration is of great importance to the understanding and exploration of ore deposits. The microscopic changes of the same mineral in different alteration zones can provide information about the migration and enrichment of ore-forming elements. In this paper, a typical profile of a high-grade iron ore body in Gongchangling iron deposit was investigated and sampled. The samples were checked by polarized microscopy, and alterations zonation were delineated according to the hydrothermal mineral assemblages and paragenesis. Moreover, hyperspectral images of wall rocks from each alteration zone were obtained by Norsk Elektro Optikk (NEO) HySpex-320 m imaging system. A customer Interactive Data Language (IDL) software package was used to process the images, and spectral features were extracted from the selected samples. The results indicate that spectral characteristics manifest obviously regular variations; i.e., from proximal to distal for the high-grade iron ore body, the wavelengths at ca. 1200 nm of chlorite and garnet, which accounts for most of the hydrothermal alteration minerals, become longer, and the absorption depths gradually smaller. The spectral features at 1200 nm of chlorite and garnet are always caused by the crystal field effect of Fe2+; therefore, the wavelength variations indicate the increase of Fe2+ and a reduced environment, which can provide more detailed information about the metallogeny and water–rock interaction. Since the hyperspectral features of the altered rocks can disclose unique mineralogical and structural information, the conventional classification of alteration zonation should be combined with the spectral feature, i.e., spectral alteration zonation, which is of great help to the understanding of the forming conditions of wall rock alteration and also the high-grade iron ore bodies.
Anshan-Benxi area in Liaoning province is an important banded iron formations (BIFs) ore-mining district in China. Chlorite is widely distributed in this area, which is related to BIFs and high-grade iron ore, respectively. A fast and convenient method to identify the type and spatial distribution of different chlorites is crucial to the evaluation of high-grade iron ore in this area. Qidashan iron mine is a typical BIFs deposit, and its BIFs-related high-grade iron ore reserves are the second largest in the area. In this paper, the laboratory-based HySpex-320m hyperspectral imaging was used to study the wall rock in Qidashan iron mine. A hyperspectral imaging processing model was established for mineral identification, mineralogy mapping, and chlorite spectral features extraction. The results show that the wavelength positions of OH, Fe-OH, and Mg-OH absorptions of chlorite in the altered wall rock of high-grade iron ore are between 1400 and 1410, 2260 and 2265, and 2360 and 2370 nm, respectively, which are longer than those around BIFs. The relationship between cations in the octahedral layer of chlorite and the wavelengths of OH, Fe-OH, and Mg-OH indicates that Mg and Mg/(Mg + Fe) are inversely related to these wavelengths, whereas Fe is positively related. The wavelengths appear to be weakly influenced by AlVI. Since the bandpass of hyperspectral imaging systems is usually less than 10 nm, these chlorite wavelength differences can be used as a favorable tool for the high-grade iron ore exploration and the iron resources evaluation in the Anshan-Benxi area.
Facing the problems in determining the distribution range of karst areas and detecting karst caves under the restrictions of complex building and human exploration environments on the urban surface, taking the karst detection of Tianmeixin village and its southern pond in the north extension section of Guanghua Intercity Railway Line 18 as the application research object, based on the formation mechanism of karst and the existing geophysical detection methods, the electrical resistivity tomography method with a large detection range and the cross-well seismic computed tomography method with a high detection accuracy are used to carry out application research on concealed karst cave detection, which are two geophysical technical detection methods with strong adaptability and anti-interference ability. The results show that the optimized combination of geophysical exploration techniques can effectively overcome the limitations of the environment, draw the main karst development areas, reveal the interface between rock and soil, and accurately characterize the size and shape of karst caves. The electrical resistivity tomography method was used to find a number of potential water conduction channels in the middle zone between Tianmeixin village and the south river. The overall distribution characteristics of karst in Tianmeixin village were summarized, and the key detection areas were drawn. This conclusion was verified by several sets of cross-well seismic computed tomography profiles, which provided a reference for the layout of the subsequent cross-well seismic computed tomography imaging method and greatly reduced the workload of drilling, shortened the construction period, saved on detection costs, and reduced the impact on the production and life of residents.
As rock fractures caused by micro-seismic events has potential safety hazards to underground workers, it is often necessary to accurately locate the micro-seismic source for hidden danger investigation. Micro-seismic data are generated in complex underground environments which are significantly affected by random noise. These data greatly influence subsequent micro-seismic source location, energy estimation, and disaster monitoring. In this paper, a new denoising method based on Time-Frequency Peak Filtering (TFPF) and Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) is proposed for micro-seismic data. Micro-seismic data are decomposed into several Intrinsic Mode Functions (IMFs) by CEEMDAN. Then, discriminant factors are used to determine which IMF needs to be denoised by TFPF. Finally, the denoised result is reconstructed by inverse CEEMDAN. By comparing and analyzing different entropies, Fuzzy Entropy (FE) is selected as the best discriminant factor. The CEEMDAN-FE-TFPF denoising method can effectively avoid the influence of fixed window length of the conventional TFPF method. The effectiveness and superiority of this method are verified by experiments of synthetic and actual data.
Most of the rare metal pegmatite deposits in China lie in West, Central and South China, and the Lijiapuzi Nb-Ta deposit is the only pegmatite-type Nb-Ta deposit in Northeast China, therefore a detailed study of the Lijiapuzi deposit is of great importance to the metallogeny and exploration of rare metal deposits in Northeast China. The Nb-Ta bearing pegmatites in Lijiapuzi district are composed of a microcline wall zone, a muscovite (lepidolite)-albite intermediate zone and a quartz core, and the rare metal mineralization mainly occurs in the intermediate zone and is intimately related to the albitization. The lithogeochemical features indicate that Lijiapuzi pegmatoids are rich in silicon and alkaline, poor in calcium, magnesium, titanium and phosphorus, and belong to peraluminous granitoid rocks. The enrichment of large ion lithophile elements (LILEs) and depletion of high field-strength elements (HFSEs), the distinct right-inclined REE pattern with obvious Eu negative anomaly, lower ratio of Nb/Ta and higher ratio of La/Nb and Rb/Sr indicate that the pegmatite was of a crustal origin and formed in relatively extensional tectonic setting of post-orogenesis. The pegmatites in Lijiapuzi area can be divided into two categories, i.e., the NW-trending pegmatites are shorter and thicker, with obvious zoning and localized in the upper part of the near-surface, while the NE-trending pegmatites are longer, thinner, devoid of zoning and localized in the lower part of the district. This probably means that excellent ore prospecting potential exists in the lower part of the Lijiapuzi district.