This review provides a state-of-the-art summary of distributed zeolite technology, as well as identifying strategies to further promote the absorption of these materials in various areas of study. Zeolites are materials that can be synthesized or found in natural rock deposits a with a basic composition consisting in Al, Si, and O. Zeolite’s consideration as a future material is due to many facile synthesis methods to obtain different structures with variations in pore size, surface area, pore volume and physical properties. These methods are developed using the control of relevant synthesis parameters that influences structure formation, such as crystallization temperature, time of aging and/or crystallization, stoichiometric relationships between components of synthesis gel, pH of the medium, and in some cases the type of structure-directing agent. Each method will lead to geometric changes in the framework formation, making possible the formation of typical chemical bonds that are the fingerprint of any zeolitic structure (O-Si-O and Al-O-Si), forming typical acid sites that give specificity in zeolite and allows it to act as a nanoreactor. The specificity is a characteristic that in some cases depends on selectivity, a fundamental property derived of the porosity, mostly in processes that occur inside the zeolite. In processes outside the structure, the surface area is the main factor influencing this property. Moreover, there are many natural sources with adequate chemical composition to be used as precursors. Some of these sources are waste, minimizing the deposition of potential hazardous materials that can be recalcitrant pollutants depending on the environment. Besides its uses as a catalyst, zeolite serves as a support for many bioprocesses; therefore, this review aims to explain relevant aspects in chemical nature, physical properties, main methods of synthesis, main precursors used for synthesis, and relevant applications of zeolites in chemical catalysis and biological processes.

Nanotechnology is a cutting-edge area with numerous industrial applications. Nanoparticles are structures that have dimensions ranging from 1 – 100 nm, which significantly exhibit different mechanical, optical, electrical, and chemical properties when compared with their larger counterparts. Synthetic routes that use natural sources, such as plant extracts, honey, and microorganisms, are environmentally friendly and low-cost methods that can be used to obtain nanoparticles. These methods of synthesis generate products that are more stable and less toxic than those obtained using conventional methods. Nanoparticles formed by titanium dioxide, zinc oxide, silver, gold, and copper, as well as cellulose nanocrystals, are among the nanostructures obtained by green synthesis that have shown interesting applications in several technological industries. Several analytical techniques have also been used to analyze the size, morphology, hydrodynamics, diameter, and chemical functional groups involved in the stabilization of the nanoparticles as well as to quantify and evaluate their formation. Despite their pharmaceutical, biotechnological, cosmetic, and food applications, studies have detected their harmful effects on human health and the environment, and thus, caution must be taken in uses involving living organisms. The present review aims to present an overview of the applications, the structural properties, and the green synthesis methods that are used to obtain nanoparticles, and special attention is given to those obtained from metal ions. The review also presents the analytical methods used to analyze, quantify, and characterize these nanostructures.

Background/Objectives: The biogenic synthesis of silver nanoparticles (AgNPs) is a promising alternative method, driven by the presence of metabolites in plant matrices capable of acting as reducing and stabilizing agents. Seasonality is a key factor that influences the phytochemical composition of plants and can directly impact the yield, physicochemical characteristics, stability, and bioactivities of the obtained AgNPs. This study aimed to synthesize AgNPs using aqueous extracts from Paullinia cupana leaves collected during dry and rainy seasons, prepared by two different methods (agitation or infusion), to evaluate the impact of these variables on the biosynthesis and properties of the nanostructures. Methods: The extracts were characterized by UHPLC-HRMS/MS, and their total phenolic compound (TPC) content and antioxidant potential against DPPH and ABTS radicals were determined. The AgNPs were characterized by UV/Vis spectrophotometry, dynamic light scattering (DLS), zeta potential (ZP), nano-particle tracking analysis (NTA), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX). Results: The metabolic profile results showed a predominance of alkaloids and flavonoids in all extracts, with greater phytochemical diversity in samples prepared by infusion. TPC indicated superior phenolic extraction in extracts prepared by infusion during the rainy season, correlating with greater antioxidant potential via the elimination of free radicals. The evolution of AgNP synthesis was accompanied by a gradual change in the color of the suspensions and the formation of plasmon bands between 410 and 430 nm, characteristic of spherical AgNPs. The nanostructures presented hydrodynamic diameters between 37.49 and 145.5 nm, PdI between 0.222 and 0.755, and Zeta potential between −11.3 and −39.9 mV, suggesting satisfactory colloidal stability. Morphological analyses revealed predominantly spherical particles with average diameters ranging from 33.61 to 48.86 nm and uniform distribution, while EDX spectra confirmed the presence of silver. Conclusions: Thus, our results demonstrate that both seasonality and the method of extract preparation influence the phytochemical composition and, consequently, the morphology, stability, and optical properties of AgNPs, with subtle emphasis on collections made during the rainy season and extracts prepared by infusion. Such knowledge contributes to the advancement of more reproducible and purpose-oriented syntheses in the field of green nanotechnology, enabling applications in various sectors.

The growing accumulation of waste from diverse human activities has intensified the search for sustainable strategies. Mechanochemistry offers a promising pathway, transforming residues into high-value products with reduced energy demand, shorter reaction times, and minimal use of solvents and reagents. Various wastes—including biomass, food residues, fly ash, used batteries, and halogenated polymers—can be converted into environmental adsorbents, industrial biopolymers, biocompatible compounds, electrodes, and catalysts. Unlike previous reviews that addressed specific waste streams, this study provides the first systematic and comparative analysis of mechanochemical valorization across multiple residues, following PRISMA guidelines (2000–2025). A total of 656 studies indexed in Scopus and Web of Science were evaluated. This integrative approach highlights recent advances, current challenges, and future prospects, offering a rigorous and transparent guide for scaling mechanochemistry toward circular and sustainable solutions.