The objective of this study, for the first time, was to optimize Amazonian cyanobacterial culture conditions for improving cell productivity and lipid content, by analyzing the effect of light intensity and nitrogen concentration, for empirically evaluating biodiesel quality parameters. The strains Synechocystis sp. CACIAM05, Microcystis aeruginosa CACIAM08, Pantanalinema rosaneae CACIAM18, and Limnothrix sp. CACIAM25, were previously identified by morphological and molecular analysis (16S rRNA) and were selected based on their production of chlorophyll a and dry cell weight. Then, factorial planning (22) with central points was applied, with light intensity and NaNO3 concentration as independent variables. As response variables, cell productivity and lipid content were determined. Statistical analysis indicated that for all strains, the independent variables were statistically significant for cell productivity. Analysis of the fatty acid composition demonstrated diversity in the composition of the fatty acid profile from the experimental planning assays of each strain. The Biodiesel Analyzer software predicted the biodiesel quality parameters. CACIAM05 and CACIAM25 obtained better parameters with low levels of light intensity and NaNO3 concentration, whereas CACIAM08 and CACIAM18 obtained better parameters with low NaNO3 concentrations and high luminous intensity.
The buriti palm (Mauritia flexuosa) is a palm tree widely distributed throughout tropical South America. The oil extracted from the fruits of this palm tree is rich in natural antioxidants. The by-products obtained from the buriti palm have social and economic importance as well, hence the interest in adding value to the residue left from refining this oil to obtain biofuel. The process of methyl esters production from the buriti oil soapstock was optimized considering acidulation and esterification. The effect of the molar ratio of sulfuric acid (H2SO4) to soapstock in the range from 0.6 to 1.0 and the reaction time (30–90 min) were analyzed. The best conditions for acidulation were molar ratio 0.8 and reaction time of 60 min. Next, the esterification of the fatty acids obtained was performed using methanol and H2SO4 as catalyst. The effects of the molar ratio (9:1–27:1), percentage of catalyst (2–6%) and reaction time (1–14 h) were investigated. The best reaction conditions were: 18:1 molar ratio, 4% catalyst and 14 h reaction time, which resulted in a yield of 92% and a conversion of 99.9%. All the key biodiesel physicochemical characterizations were within the parameters established by the Brazilian standard. The biodiesel obtained presented high ester content (96.6%) and oxidative stability (16.1 h).
Efforts are intensifying to identify new biofuel sources in response to the pressing need to mitigate environmental pollutants, such as greenhouse gases, which are key contributors to global warming and various worldwide calamities. Algae and microalgae present themselves as excellent alternatives for solid-gaseous fuel production, given their renewable nature and non-polluting characteristics. However, making biomass production from these organisms economically feasible remains a challenge. This article collates various studies on the use of lignocellulosic waste, transforming it from environmental waste to valuable organic supplements for algae and microalgae cultivation. The focus is on enhancing biomass production and the metabolites derived from these biomasses.
1 January 2024 in Anais da Academia Brasileira de Ciências
The high performance of biomass and metabolite biosynthesis by photosynthetic microorganisms is directly influenced by the cultivation system employed. Photobioreactors (PBRs) stand out as controlled and fundamental systems for increasing the production of biocompounds. However, the high costs associated with these systems hinder their viability. Thus, a more practical and economical approach is necessary. Accordingly, this study aimed to design and evaluate low-cost flat-panel photobioreactors on a laboratory scale for the cultivation of photosynthetic microorganisms, using economical materials and instruments. Additionally, internal optimization of the low-cost system was aimed to maximize growth and biomass production. The PBRs were designed and built with uniform dimensions, employing 4 mm translucent glass and agitation through compressors. The internally optimized system (PBR-OII) was equipped with perforated acrylic plates used as static mixers. To evaluate the performance of the low-cost PBR-OII, a comparison was made with the control photobioreactor (PBR-CI), of the same geometry but without internal optimization, using a culture of Synechocystis sp. CACIAM 05 culture. The results showed that the PBR-OII achieved maximum biomass yield and productivity of 6.82 mg/mL and 250 mg/L/day, respectively, values superior to the PBR-CI (1.87 mg/mL and 62 mg/L/day). Additionally, the chlorophyll concentration in the PBR-OII system was 28.89 ± 3.44 µg/mL, while in the control system, the maximum reached was 23.12 ± 1.85 µg/mL. Therefore, low-cost photobioreactors have demonstrated to be an essential tool for significantly increasing biomass production, supporting research, and reducing costs associated with the process, enabling their implementation on a laboratory scale.
The growing accumulation of waste from diverse human activities has intensified the search for sustainable strategies. Mechanochemistry offers a promising pathway, transforming residues into high-value products with reduced energy demand, shorter reaction times, and minimal use of solvents and reagents. Various wastes—including biomass, food residues, fly ash, used batteries, and halogenated polymers—can be converted into environmental adsorbents, industrial biopolymers, biocompatible compounds, electrodes, and catalysts. Unlike previous reviews that addressed specific waste streams, this study provides the first systematic and comparative analysis of mechanochemical valorization across multiple residues, following PRISMA guidelines (2000–2025). A total of 656 studies indexed in Scopus and Web of Science were evaluated. This integrative approach highlights recent advances, current challenges, and future prospects, offering a rigorous and transparent guide for scaling mechanochemistry toward circular and sustainable solutions.
Renewable energy has been recognized as an alternative to fossil fuels as a step to transform the energy produced and consumed worldwide. Cyanobacteria and microalgae are currently being considered as substitutes to the traditional feedstock used to produce biofuels due to their ability to achieve high amounts of lipids under cellular stress conditions. The aim of this study was to investigate the utilization of Tolypothrix sp. CACIAM 22 cyanobacterial biomass as a feedstock for biodiesel production, specifically by examining the effects of supplementing with hydrolysate of Brazil nutshell (HBNS) on biomass generation, lipid production, fatty acid composition, and quality of synthesized biodiesel. The supplementation of HBNS led to a significant increase of 12g.L-1 in wet biomass production. The lipid content reached 41 % of the biomass produced in HBNS supplemented cultures when nitrate source was deprived. The quality evaluation of cyanobacteria-derived biodiesel was performed using Biodiesel Analyzer ver 2.2 software, revealing superior quality compared to biodiesel produced from plant sources. The biodiesel exhibited values of 23 h for oxidative stability, 65 for cetane number, and an iodine index of 31 (g I2. 100 g-1fat), indicating promising potential as a renewable source. This study is the first to utilize HBNS as an organic supplement for cyanobacteria culture medium and assess its impact on biomass and lipid production in Tolypothrix sp., supporting the hypothesis of utilizing this biomass as a renewable feedstock for biodiesel production as a viable alternative to plant sources based on biomass production, lipid productivity, and biodiesel quality.