Typhoons and typhoon waves can cause disasters in coastal areas around the world. The Taiwan Strait often experiences typhoons, especially in summer. Numerical models have been adopted to predict typhoons and reduce losses. The Weather Research and Forecasting (WRF) model is widely used in typhoon simulations, and the Simulating WAves Nearshore (SWAN) model performs well in wave simulations. However, significant uncertainty remains in terms of choosing suitable WRF physical parameterizations in different situations. To evaluate the effect of WRF physical parameterizations on wind and wave simulations, 27 simulation experiments were designed. Three typhoon events (Goni, Dujuan, and Meranti) with different tracks that influenced the Taiwan Strait were simulated. Three parameters (wind speed, wind direction and significant wave height) were assessed using Taylor diagrams, and it was found that the best simulation experiment changed according to typhoon tracks and physical parameters. In wind speed simulation, the best simulation experiment is 12 for typhoon Dujuan and 19 for typhoon Goni and Meranti. From the perspective of wind direction simulation, experiments 26, 23, and 2 performed best for typhoons Goni, Dujuan, and Meranti. And experiments 19, 1, and 20 had the best performances in significant wave height simulation for typhoons Goni, Dujuan, and Meranti. The WRF-SWAN model using the best simulation experiment reduced the error and exhibited good performance in the wind and wave simulations. Skill scores of three parameters were all over 70 for typhoon Goni and 80 for typhoon Dujuan and Meranti. The applicability of the best simulation experiments was demonstrated in typhoon simulations with similar tracks. The accuracy of the wave simulation depended on wind speed, wind direction, and their interaction. In addition, a scheme’s sensitivity changed with different typhoon tracks. This study provides references for designing physical parameterizations for use with the WRF-SWAN model, which may help to simulate typhoons and typhoon waves in the Taiwan Strait more accurately in the future.
Typhoons Soudelor (2015) and Dujuan (2015) were two of the strongest storms to affect the Taiwan Strait in 2015. This study investigated the response of the waters on the western bank of the Taiwan Strait to the passage of Soudelor and Dujuan. This included an investigation of the resonant coupling between the tide and storm surge, typhoon wave variation caused by the storm tide, and wave-induced water level rise. Analyses conducted using numerical model simulations and observations from tidal stations and buoys, obtained during the passage of both Soudelor and Dujuan, revealed that resonant coupling between the astronomical tide and storm surge in the Taiwan Strait was prominent, which resulted in tidal period oscillation on the storm surge and reduced tidal range. The tide wave arrived earlier than the predicted astronomical tide because of the existence of the storm surge, which was attributable to acceleration of the tidal wave caused by the water level rise. Wave height observations showed that the storm tide predominantly affected the waves, which resulted in wave heights that oscillated within the tidal period. Numerical experiments indicated that both the current and the water level affected wave height. Waves were affected mainly by the current in the middle of the Taiwan Strait, but mostly by water level when the water level was comparable with water depth. Wave setup simulations revealed that wave setup also oscillated within the tidal period, and that local bathymetry was the most important influencing factor of wave setup distribution.
This work investigates the dynamic behaviors of floating structures with moorings using open-source software for smoothed particle hydrodynamics. DualSPHysics permits us to use graphics processing units to recreate designs that include complex calculations at high resolution with reasonable computational time. A free damped oscillation was simulated, and its results were compared with theoretical data to validate the numerical model developed. The simulated three degrees of freedom (3-DoF) (surge, heave, and pitch) of a rectangular floating box have excellent consistency with experimental data. MoorDyn was coupled with DualSPHysics to include a mooring simulation. Finally, we modelled and simulated a real mariculture platform on the coast of China. We simulated the 3-DoF of this mariculture platform under a typical annual wave and a Typhoon Dujuan wave. The motion was light and gentle under the typical annual wave but vigorous under the Typhoon Dujuan wave. Experiments at different tidal water levels revealed an earlier motion response and smaller motion range during the high tide. The results reveal that DualSPHysics combined with MoorDyn is an adaptive scheme to simulate a coupled fluid–solid–mooring system. This work provides support to disaster warning, emergency evacuation, and proper engineering design.
The terrain, such as Taiwan Island, have been shown to have complex effects on typhoons and the associated typhoon waves. Terrain effects change with typhoon tracks. In this study, three types of typhoon tracks (northern, middle and southern) were defined according to the relationship between the typhoon tracks and Taiwan Island. Typhoons on these three tracks and typhoon waves were simulated using the Weather Research and Forecasting–Simulating Waves Nearshore model. In each type of typhoon, a control case without the Taiwan topography was simulated to compare with real cases. The results showed that typhoons on different tracks were affected by the terrain of Taiwan Island in different ways. Taiwan Island had weakening, decelerating and deflective effects on typhoons. The ranking for the weakening effect was middle track (81%) > southern track (69%) > northern track (3%). The decelerating effect was 7% in the northern track and 25% in the southern track. The deflective effect of the terrain makes typhoons on the northern (southern) track deflect toward the south (north). When a typhoon on a middle track passed over Taiwan Island, a new center of low pressure would replace the former center and make the track discontinuous. In addition, the influence of typhoons on regions near Taiwan Island changed with the typhoon’s tracks. The influence ranking of typhoons in Taiwan Island was the middle track > southern track > northern track, which was consistent with that of typhoons in the Taiwan Strait and opposite to that of typhoons in Fujian Province. The influence ranking of typhoons on the Taiwan Strait was the opposite of the typhoon intensity ranking, which suggests that the intensities of wind and waves in the strait were more related to typhoon tracks than typhoon intensity. The variations in the significant wave height were similar to those of the wind speed, but there was a time lag (2 h) between them due to the wave growth process and swells. In addition, the significant wave height distribution sometimes differed from the wind speed distribution under the influence of swells and terrain.
FETSWCM-SWAN and DualSPHysics models are used to study the storm flooding process of Dazuo Seawall in Quanzhou city, Fujian province, China. Firstly, a storm over-topping assessment method is proposed. Secondly, the water level and storm wave at the foot of Dazuo Seawall calculated by FETSWCM-SWAN during the process of Typhoon Usagi in 2013 and Typhoon Dujuan in 2015. Finally, the typical wave and storm run-up processes at Dazuo Seawall are modeled by DualSPHysics. The results show that the typical wave run-up of Dazuo Seawall is less than 2 m, but the storm wave run-up can reach 6.85 m under Usagi. The risk is high when high tide is encountered. The risk of storm flooding is classified into three grades. This risk assessment could provide decision-making support to government departments in warning against storm flooding threats.
Published source models for the 2011 Tohoku-Oki earthquake differ in shallow slip, northern rupture contribution, and peak-slip location, producing different predictions of coseismic deformation and tsunami-relevant seafloor motion. This study does not construct a new full slip inversion. Instead, it develops a reproducible residual-diagnostic and consistency-testing workflow for selected USGS-type and Satake/Fujii-type models with Okada forward modeling. Modeled displacements are compared with a 20-station subset of published mainshock-isolated GEONET offsets derived from 30 s solutions, followed by segmented slip-scaling sensitivity analysis, uncertainty weighting and complete leave-one-out robustness tests, offshore GNSS-A validation, and controlled JAGURS waveform simulations for the final candidate sources. For the revised USGS-type analysis, the horizontal-magnitude and up-component RMSE values decrease from 0.792 and 0.355 m to 0.204 and 0.141 m, respectively. The selected North-Iwate multiplier reaches the non-negative lower bound and is therefore interpreted only as a diagnostic indication of source over-contribution. The revised Satake/Fujii grid substantially improves the horizontal fit while retaining low vertical error. Offshore GNSS-A validation changes the ranking: the Satake baseline best reproduces vertical offshore displacement, whereas the Satake constrained-best candidate gives the best horizontal-vector and three-dimensional fit. The JAGURS waveform comparison is treated as a common-setting consistency test, not as independent validation of the Satake model, because DART21418 and relevant GPS wave-gauge observations were among the data classes used in developing that source. Thus, onshore GEONET residual reduction is necessary but insufficient; tsunami-source selection requires offshore geodetic evaluation and carefully bounded waveform consistency testing.