Moritz Kreyenschulte

Dr. Moritz Kreyenschulte

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 December 2020 in Water
Verified
Journal Article
Open access
PDF file
MKMoritz Kreyenschulte
Moritz Kreyenschulte
DSDavid Schürenkamp
David Schürenkamp
BBBenedikt Bratz
Benedikt Bratz
Holger SchüttrumpfHolger Schüttrumpf
Holger Schüttrumpf
Nils GosebergNils Goseberg
Nils Goseberg
The wave run-up height is a crucial design parameter that determines the crest height of a sea dike and is used for estimating the number of overtopping waves. Therefore, a reduction of the wave run-up height is generally aspired in the design of dikes, which can be achieved by mortar-grouted riprap revetments (MGRR). Although MGRRs are widely utilized revetments along the German North Sea coast, no investigations into the wave run-up height on this revetment type are available to date. Full-scale hydraulic model tests were hence conducted to investigate wave run-up heights on partially grouted and fully grouted MGRRs. The wave run-up was determined using 2D-LIDAR measurements, which were validated by video data. Partially grouted MGRRs, due to their roughness, porosity, and permeability, reduce wave run-up heights from 21% to 28%, and fully grouted MGRRs due to their roughness reduce wave run-up heights from 12% to 14% compared to smooth impermeable revetments. Influence factors have been determined for four widely used revetment configurations, which can now be used for design purposes. A comparison and subsequent discussion about the representation of the physics of wave run-up by different parameters is carried out with the results presented.

Verified
Journal Article
Open access
PDF file
MKMoritz Kreyenschulte
Moritz Kreyenschulte
Holger SchüttrumpfHolger Schüttrumpf
Holger Schüttrumpf
One of the most common revetment types in Germany is the mortar-grouted riprap revetment (MGRR), which is constructed by placing riprap on a filter or separation layer and subsequent grouting with mortar. Existing technical standards and guidelines for MGRRs do not consider the interaction between dynamic wave loading and structural response. To date, scientifically sound design approaches verified by model tests are missing. Therefore, the aim of this work is to establish a process-based model for the calculation of the acting bending tensile stresses during wave attack for MGRRs to asses crack formation. To this end, MGRRs were modelled as plates on an elastic foundation (PEF). Hydraulic boundary conditions were determined with full-scale hydraulic model tests. Model parameters of the PEF model were established by investigations into the mechanical parameters of the constituents of MGRRs. The results show that tensile bending stresses are particularly dependent on the pressure difference between the top and bottom edge of the top layer, which varies significantly for MGRRs as their porosity and permeability varies significantly depending on the amount of mortar used for grouting. Enveloping functions for maximum relative tensile bending stress σx,max/(ρwgHm0) are given for four configurations of MGRRs that are of great practical relevance.

13 October 2022 in Grundwasser
Verified
Journal Article
Open access
PDF file
Lukas TophoffLukas Tophoff
Lukas Tophoff
MKMoritz Kreyenschulte
Moritz Kreyenschulte
Holger SchüttrumpfHolger Schüttrumpf
Holger Schüttrumpf
FHFrank Heimbecher
Frank Heimbecher
Zusammenfassung: In den letzten Jahrzehnten kam es in Einzelfällen zu schweren Schäden an wasserbaulichen geotextilen Filteranlagen infolge der Verstopfung durch ausgeflockte ockerhaltige Produkte. Durch eine starke Verminderung der Durchlässigkeit der Geokunststoffe in Kombination mit einem hohen hydrostatischen Druck wurden unter anderem die Deckschichten verschiedener Deckwerke in den tidebeeinflussten Wasserstraßen Ems und Weser angehoben und beschädigt. Bisher wurden die Milieubedingungen, d. h. Grundwasser- und Oberflächenwasserbeschaffenheit sowie Aquifer- und Deckwerksmaterial, unter denen die Ockerbildung in geotextilen und mineralischen Filteranlagen auftritt, noch nicht systematisch untersucht. Im Rahmen des vorliegenden Beitrags werden im ersten Schritt aus theoretischen Untersuchungen und Datenanalysen von Grundwasser- und Oberflächenwasseruntersuchungen Kriterien zur Bewertung der Verockerungsneigung abgeleitet. Diese Kriterien bzw. DOCP (decisive ochre clogging parameters) zeigen in den Ästuaren Ems, Weser und Elbe Beträge an, die Verockerungserscheinungen begünstigen bzw. ermöglichen. Auf Basis dieser Untersuchungen werden im zweiten Schritt Randbedingungen für zukünftige systematische In-situ-Untersuchungen an wasserbaulichen Filteranlagen sowie im experimentellen Modell abgeleitet.