Amongst extreme hydrodynamic events are bore- and surge-type flow motions that are observed in the context of storm surges induced by tropical cyclones, but also occur when tsunami or flash floods strike. Coastal houses built on elevated pile foundations have suffered less damages in recent extreme hydrodynamic events since the water could pass beneath the floor slabs decreasing the exertion of forces onto structures. To date, research pertaining to horizontal and vertical forces on elevated structures is still scarce. Specifically, previous research may not be applicable to cases of bore-type inundation interacting with elevated coastal structures. This work hence aims to model non-elevated and elevated coastal structure, and to deepen insight into forces with a focus on the structural elevation. For this purpose, large-scale experimental tests were performed on a uniform 1:15 slope in combination with an adjacent horizontal plane. Idealized residential buildings on a length scale of 1:5 were designed to simulate loading conditions of broken solitary waves on slab-on-grade and elevated buildings. A wide range of horizontal forces between 0.1 and 10 , vertical forces between 0.5 and 7.5 and overturning moments up to 4.5 were measured. In accordance with the experimental results, design equations were derived.
The wave run-up height is a crucial design parameter that determines the crest height of a sea dike and is used for estimating the number of overtopping waves. Therefore, a reduction of the wave run-up height is generally aspired in the design of dikes, which can be achieved by mortar-grouted riprap revetments (MGRR). Although MGRRs are widely utilized revetments along the German North Sea coast, no investigations into the wave run-up height on this revetment type are available to date. Full-scale hydraulic model tests were hence conducted to investigate wave run-up heights on partially grouted and fully grouted MGRRs. The wave run-up was determined using 2D-LIDAR measurements, which were validated by video data. Partially grouted MGRRs, due to their roughness, porosity, and permeability, reduce wave run-up heights from 21% to 28%, and fully grouted MGRRs due to their roughness reduce wave run-up heights from 12% to 14% compared to smooth impermeable revetments. Influence factors have been determined for four widely used revetment configurations, which can now be used for design purposes. A comparison and subsequent discussion about the representation of the physics of wave run-up by different parameters is carried out with the results presented.
5 December 2024 in Journal of Fluids and Structures
Besides the natural protection of coastal dunes against storm surges (Mehrtens et al., 2023), blue-grey-hybrid dune structures play a key role in strengthening the protective mechanism of dunes against erosion, while imitating their natural landform appearance and function (Nordstrom 2019). Although artificial dunes with hybrid core enhancements are widespreadly implemented along many coasts worldwide (Winters et al., 2020), limited work addressed the effectiveness and potential enhancement of specific dune reinforcement strategies in a comparative fashion. An exception to this statement is the work by Figlus et al (2015), who conducted a series of experiments with three incorporated dune cores: a T-wall, a clay levee and an armour stone revetment. Nonetheless, a benchmark study on the efficacy and comparative performance of hybrid dune reinforcement strategies, with an identical parameter frame remains unavailable to date.
1 July 2025 in Journal of Waterway, Port, Coastal, and Ocean Engineering