Canopy temperature is used as an indicator of plant water stress. In recent years, technological advances have allowed improved applications in agriculture from temperature sensors clamped on leaves to short-range remote-sensing, such as infrared thermometry and thermal imaging. There are many scientific studies on the use of thermal imaging to determine crop water stress; however, no study on wheat crops has been found in the literature. Therefore, this study aimed to determine the detectability of water stress in wheat by using thermal images. In the experiment, drainage-type, weighable lysimeters were used to make precise irrigations and obtain components of the water budget for calculating the plant water consumption. Wheat crops were grown under four different irrigation levels including no water stress as control (I100), mild water stress (I75), moderate water stress (I50), and severe water stress (I25). When the thermal images were examined, it can be seen that pre-irrigation images reflect water stress conditions better than post-irrigation. The warm color distribution was more evident under severe water stress, whereas cold colors were dominant under no water stress. During the experimental period, the plant leaf temperatures varied from 17.5 to 34.2°C, while the spike temperatures ranged from 26.6°C to 36.3°C. The lowest plant leaf and spike temperature values were observed under control, whereas the highest values were obtained under severe water stress. It can be said that thermal cameras that provide fast and contactless data acquisition have the potential to be used in detecting water stress in wheat crops.
This study evaluates the effects of shading nets with photoselective features, with an open-field control. A green-shade net with a shading intensity of 40% intensity and blue, pearl, and yellow-shade nets with shading intensity of 75% were used as netting materials and the total radiation and photosynthetically active radiation (PAR) transmittance of the shade nets were analysed. The environmental conditions such as air temperature, relative humidity, and canopy temperature were measured with the aid of appropriate sensors. Tomatoes were grown to determine the effects of shade nets on crops cultivated under the four shade nets, and an additional treatment (control) was used in which tomatoes were grown under full sun conditions. The vegetative growth parameters, fruit quality parameters and yields were assessed and the findings showed that shading resulted in a significant increase in the total yield and pearl-shade nets are the best choice for producing a high quality tomato crop based on PAR transmittance (between 44.8% and 52.8%).
Greenhouse have to provide optimal climate conditions for healthy plant growth and high production. Heating of greenhouses is required for an efficient and reliable production specially during winter time in Turkey. However, even in the temperate zones, heating costs has a great portion in the total production costs. Coal is preferred as a fuel in the greenhouse heating in provinces of Turkey where there is no geothermal energy. In this study, the heating requirements and fuel cost (fossil and geothermal energy) for Antalya, Afyon, Kütahya, Denizli, and Aydın provinces in the Aegean and Mediterranean region have been identified based on long term meteorological data. The calculations were made for two model greenhouses located in an area with 1 ha representing modern greenhouses of the regions. The first is a gothic roofed plastic model greenhouse and the second is a gable roofed polycarbonate model greenhouse. According to the results of calculations, total annual heatingrequirement values ranged from 6,096,283 (for Antalya) to 20,359,946 MJ/ha (for Afyon) for the plastic greenhouse wheras these values ranged from 3,187,074 (for Antalya) to 10,643,972 MJ/ha (for Afyon) for the polycarbonate greenhouse.
7 November 2024 in Communications in Soil Science and Plant Analysis
Bu çalışmada CO-EX teknoloji ile üretilen farklı film kalınlıklı ve katkı maddeli polietilen (PE) sera örtü malzemelerinin global solar radyasyon ve fotosentetik etkin ışınım (PAR) geçirgenliğindeki değişimler araştırılmıştır. Deneme 270 m2 taban alanlı 3 adet serada yürütülmüştür. Seraların örtü materyalleri 180 mikron UV+EVA+IR+LD+AF katkılı PE, 160 mikron UV+EVA+IR+LD+AF katkılı PE ve 200 mikron UV+ EVA+IR katkılı PE'dir. Çalışmada 180 mikron UV+EVA+IR+LD+AF katkılı PE, 160 mikron UV+EVA+IR+LD+AF katkılı PE ve 200 mikron UV+EVA+IR katkılı PE sera örtü malzemelerinin başlangıç toplam ışınım geçirgenlik değerlerinin sırasıyla %79.9, %68.3 ve % 66.0 olduğu saptanmıştır. 3 aylık bir periyotta ile sera örtü malzemelerinde geçirgenlik kaybının sırasıyla %9.9, %11.9 ve %13.5 olduğu belirlenmiştir. Çalışmada 180 mikron UV+EVA+IR+LD+AF katkılı PE, 160 mikron UV+EVA+IR+LD+AF katkılı PE ve 200 mikron UV+EVA+IR katkılı PE sera örtü malzemelerinin başlangıç PAR geçirgenlik değerlerinin sırasıyla %71.1, %66.8 ve % 64.9 olduğu saptanmıştır. Işınım geçirgenliğinin düşük olduğu 200 mikron kalınlıklı PE serada en düşük iç ortam sıcaklık değerleri elde edilmiştir.
Yeni Miras Yasasına Göre Arazi Toplulaştırma Projelemesi Müge KİRMİKİL Şerife Tülin AKKAYA ASLAN Arazi Toplulaştırma İle Parsel Düzenlemesindeki Başarı Kriterleri Müge KİRMİKİL Şerife Tülin AKKAYA ASLAN Kısıntılı Sulama Uygulamalarının Mısır Bitkisi Verimi Üzerine Etkilerinin Bölgeler Bazında İncelenmesi Yoldaş EKTİREN Hasan DEĞİRMENCİ Etlik Piliç Kümeslerinde Verimliliği Artırmaya Yönelik Yaklaşımlar: Çevre Koşulları ve Yönetimi Ali ÇAYLI Tarımsal Sulamada Endüstri 4.0’A Bakış Mualla KETEN Çağatay TANRIVERDI Seralarda Enerji Verimliliğini Arttırmak İçin Uygulanacak Bazı Teknik Önlemlerin Değerlendirilmesi Sedat BOYACI Seralarda İklimlendirme ve Sürdürülebilirlik Nefise Yasemin TEZCAN Sera Yetiştiriciliğinde Kirletici Faktörlerin Değerlendirilmesi: Antalya Örneği Hasan ERTOP Atılgan ATILGAN Burak SALTUK Hayvancılıkta Modern Teknolojiler ve Gelecek Beklentileri Müge ERKAN CAN Seralarda Isı Gücü Gereksinimine Bağlı Isıtma Kazan Kapasitelerinin Belirlenmesi Sedat BOYACI Kesintili Damla Sulama Sertan SESVEREN Seralarda Soğutma Pedi Olarak Bazı Yerel Malzemelerin Uygunluklarının Değerlendirilmesi Alanya Örneği Burak SALTUK Atılgan ATILGAN