Dam-break wave propagation usually occurs over irregular topography, due for example to natural contraction-expansion of the river bed and to the presence of natural or artificial obstacles. Due to limited available dam-break real-case data, laboratory and numerical modeling studies are significant for understanding this type of complex flow problems. To contribute to the related field, a dam-break flow over a channel with a contracting reach was investigated experimentally and numerically. Laboratory tests were carried out in a smooth rectangular channel with a horizontal dry bed for three different lateral contraction geometries. A non-intrusive digital imaging technique was utilized to analyze the dam-break wave propagation. Free surface profiles and time variation of water levels in selected sections were obtained directly from three synchronized CCD video camera records through a virtual wave probe. The experimental results were compared against the numerical solution of VOF (Volume of Fluid)-based Shallow Water Equations (SWEs) and Reynolds-Averaged Navier-Stokes (RANS) equations with the k-ε turbulence model. Good agreements were obtained between computed and measured results. However, the RANS solution shows a better correspondence with the experimental results compared with the SWEs one. The presented new experimental data can be used to validate numerical models for the simulation of dam-break flows over irregular topography.

The impact of a dam-break wave on an erodible embankment with a steep slope is studied in the paper using both experimental and numerical approaches. The laboratory experiments have been specifically designed and performed for a range of the storage water levels and the embankment elevations and slopes. The simulations were carried out using a recently-developed two-phase depth-integrated model, supplemented with a geofailure operator to account for the possible occurrence of geotechnical collapses. A comparison between numerical and experimental results indicates that the two-phase model reproduces the experimental free surface elevation well, with or without the geofailure operator. On the other hand, especially for high embankment slopes, this operator appears to be important for predicting the observed morphological evolution. The results also show that, due to the geotechnical collapses, water and sediment velocities may have opposite signs. While the models based on equal direction of the liquid and the solid motions cannot reproduce this effect, the proposed two-phase approach easily accounts for such a peculiarity of the investigated process.

Plastic pipes are widely used in pressurized water systems. Their viscoelastic behavior has to be taken into account in the design phase as well as in the interpretation of water-hammer signals for diagnostic purposes. The aim of the present paper is to experimentally investigate the transient waves’ transmission and reflection in branched networks of high density polyethylene (HDPE) pipes and to test the efficacy of a viscoelastic model for the interpretation of the results. Two laboratory Y-shaped systems were built in the Water Engineering Lab of the University of Cassino and Southern Lazio (Italy) and a set of water-hammer tests was conducted on them. A significant variation of transmission and reflection coefficients at the pipe junction is observed in comparison with the values suggested in classical textbooks. The strong agreement between the experimental pressure values and those obtained using the viscoelastic model suggests that the differences from the classical theory are due to the vi...

Dike erosion is a crucial issue in coastal and fluvial flood risk management. These defense structures appear vulnerable to extreme hydrological events, whose potential occurrence risk seems to be recently increased due to climate change. Their design and reinforcement is, however, a complex task, and although numerical models are very powerful nowadays, real processes cannot be accurately predicted; therefore, physical models constitute a useful tool to investigate different features under controlled conditions. This paper presents some laboratory experimental results of erosion of a sand dike produced by the impact of a dam break wave. Experiments have been conducted in the Water Engineering Laboratory at the University of Cassino and Southern Lazio, Italy, in a rectangular channel: here, the sudden opening of a gate forming the reservoir generates the wave impacting the dike, made in turn of two different, almost uniform sands. The physical evidence proves that the erosion process is strongly unsteady and significantly different from a gradual overtopping and highlights the importance of apparent cohesion for the fine sand dike. The experimental results have also been compared against the ones obtained through the numerical integration of a two-phase model, which shows the reasonable predictive capability of the temporal free surface and dike profile evolution.