Stormwater runoff is often contaminated by human activities. Stormwater discharge into water bodies significantly contributes to environmental pollution. The choice of suitable treatment technologies is dependent on the pollutant concentrations. Wastewater quality indicators such as biochemical oxygen demand (BOD5), chemical oxygen demand (COD), total suspended solids (TSS), and total dissolved solids (TDS) give a measure of the main pollutants. The aim of this study is to provide an indirect methodology for the estimation of the main wastewater quality indicators, based on some characteristics of the drainage basin. The catchment is seen as a black box: the physical processes of accumulation, washing, and transport of pollutants are not mathematically described. Two models deriving from studies on artificial intelligence have been used in this research: Support Vector Regression (SVR) and Regression Trees (RT). Both the models showed robustness, reliability, and high generalization capability. However, with reference to coefficient of determination R2 and root‐mean square error, Support Vector Regression showed a better performance than Regression Tree in predicting TSS, TDS, and COD. As regards BOD5, the two models showed a comparable performance. Therefore, the considered machine learning algorithms may be useful for providing an estimation of the values to be considered for the sizing of the treatment units in absence of direct measures.

Rainfall-runoff models can be classified into three types: physically based models, conceptual models, and empirical models. In this latter class of models, the catchment is considered as a black box, without any reference to the internal processes that control the transformation of rainfall to runoff. In recent years, some models derived from studies on artificial intelligence have found increasing use. Among these, particular attention should be paid to Support Vector Machines (SVMs). This paper shows a comparative study of rainfall-runoff modeling between a SVM-based approach and the EPA’s Storm Water Management Model (SWMM). The SVM is applied in the variant called Support Vector regression (SVR). Two different experimental basins located in the north of Italy have been considered as case studies. Two criteria have been chosen to assess the consistency between the recorded and predicted flow rates: the root-mean square error (RMSE) and the coefficient of determination. The two models showed comparable performance. In particular, both models can properly model the hydrograph shape, the time to peak and the total runoff. The SVR algorithm tends to underestimate the peak discharge, while SWMM tends to overestimate it. SVR shows great potential for applications in the field of urban hydrology, but currently it also has significant limitations regarding the model calibration.

The Battle of the Water Networks II (BWN-II) is the latest of a series of competitions related to the design and operation of water distribution systems (WDSs) undertaken within the Water Distribution Systems Analysis (WDSA) Symposium series. The BWN-II problem specification involved a broadly defined design and operation problem for an existing network that has to be upgraded for increased future demands, and the addition of a new development area. The design decisions involved addition of new and parallel pipes, storage, operational controls for pumps and valves, and sizing of backup power supply. Design criteria involved hydraulic, water quality, reliability, and environmental performance measures. Fourteen teams participated in the Battle and presented their results at the 14th Water Distribution Systems Analysis (WDSA 2012) conference in Adelaide, Australia, September 2012. This paper summarizes the approaches used by the participants and the results they obtained. Given the complexity of the BWN-II problem and the innovative methods required to deal with the multi-objective, high dimensional and computationally demanding nature of the problem, this paper represents a snap-shot of state of the art methods for the design and operation of water distribution systems. A general finding of this paper is that there is benefit in using a combination of heuristic engineering experience and sophisticated optimization algorithms when tackling complex real-world water distribution system design problems.Angela Marchi...Angus R. Simpson, Aaron C. Zecchin, Holger R. Maier...Christopher Stokes, Wenyan Wu, Graeme C. Dandy...et al

Circular drop manholes are widely employed in steep urban drainage systems. Drop manholes may lead to poor hydraulic conditions if their energy dissipation is inadequate. The dominant hydraulic features of drop manholes depend on the flow regimes, characterized in terms of the dimensionless impact parameter. Depending on the latter parameter, the energy dissipation can vary within large limits, affecting thereby the downstream flow features. Also, the water pool depth inside the manhole and the air entrainment have been studied in terms of both the hydraulic and geometric parameters. Moreover, the conditions for which a drop manhole generates flow choking at its inlet or outlet have been investigated. Empirical equations for practical manhole design are provided. The importance of suitable manhole aeration is highlighted.

Precipitation forecasting is essential for the assessment of several hydrological processes. This study shows that based on a machine learning approach, reliable models for precipitation prediction can be developed. The tropical monsoon-climate northern region of Bangladesh, including the Rangpur and Sylhet division, was chosen as the case study. Two machine learning algorithms were used: M5P and support vector regression. Moreover, a novel hybrid model based on the two algorithms was developed. The performance of prediction models was assessed by means of evaluation metrics and graphical representations. A sensitivity analysis was also carried out to assess the prediction accuracy as the number of exogenous inputs reduces and lag times increases. Overall, the hybrid model M5P-SVR led to the best predictions among used models in this study, with R² values up to 0.87 and 0.92 for the stations of Rangpur and Sylhet, respectively.