We demonstrate that the use of a GaN seeding layer prepared prior to the growth of epitaxial GaN on Si (111) can lead to the formation of oriented arrays of Y-shaped nanoislands and nanowires and affects the surface density of the nanostructures.
15 January 2018 in Beilstein Journal of Nanotechnology
In this paper we study growth of quasi-one-dimensional GaN nanowires (NWs) and nanotube (NT)-like nanostructures on Si(111) substrates covered with a thin AlN layer grown by means of plasma-assisted molecular beam epitaxy. In the first part of our study we investigate the influence of the growth parameters on the geometrical properties of the GaN NW arrays. First, we find that the annealing procedure carried out prior to deposition of the AlN buffer affects the elongation rate and the surface density of the wires. It has been experimentally demonstrated that the NW elongation rate and the surface density drastically depend on the substrate growth temperature, where 800 °C corresponds to the maximum elongation rate of the NWs. In the second part of the study, we introduce a new dopant-stimulated method for GaN nanotube-like nanostructure synthesis using a high-intensity Si flux. Transmission electron microscopy was used to investigate the morphological features of the GaN nanostructures. The synthesized structures have a hexagonal cross-section and possess high crystal quality. We propose a theoretical model of the novel nanostructure formation which includes the role of the dopant Si. Some of the Si-doped samples were studied with the photoluminescence (PL) technique. The analysis of the PL spectra shows that the highest value of donor concentration in the nanostructures exceeds 5∙1019 cm−3.
1 September 2015 in Physica Status Solidi (RRL) – Rapid Research Letters
The role of Si (111) substrate surface preparation and buffer layer composition in the growth, electronic and optical properties of the GaN nanowires (NWs) synthesized via plasma-assisted molecular beam epitaxy is studied. A comparison study of GaN NWs growth on the bare Si (111) substrate, silicon nitride interlayer, predeposited AlN and GaO x buffer layers, monolayer thick Ga wetting layer and GaN seeding layer prepared by the droplet epitaxy is performed. It is demonstrated that the homogeneity and the morphology of the NW arrays drastically depend on the chosen buffer layer and surface preparation technique. An effect of the buffer and seeding layers on the nucleation and desorption is also discussed. The lowest NWs surface density of 14 μ m −2 is obtained on AlN buffer layer and the highest density exceeding the latter value by more than an order of magnitude corresponds to the growth on the 0.3 ML thick Ga wetting layer. It is shown, that the highest NWs mean elongation rate is obtained with AlN buffer layer, while the lowest elongation rate corresponds to the bare Si (111) surface and it is twice as lower as the first case. It is found, that use of AlN buffer layer corresponds to the most homogeneous NWs array with the smallest length dispersion while the least homogeneous array corresponds to the bare Si substrate. Vertically aligned GaN NWs array on the wide bandgap GaO x semiconductor buffer layer grown by plasma-enhanced chemical vapor deposition demonstrates its potential for electronic applications. Photoluminescence (PL) study of the synthesized samples is characterized by an intense optical response related to the excitons bound to neutral donors. The highest PL intensity is obtained in the sample with AlN buffer layer.
Tailorable synthesis of III-V semiconductor heterostructures in nanowires (NWs) enables new approaches with respect to designing photonic and electronic devices at the nanoscale. We present a comprehensive study of highly controllable self-catalyzed growth of gallium phosphide (GaP) NWs on template-free silicon (111) substrates by molecular beam epitaxy. We report the approach to form the silicon oxide layer, which reproducibly provides a high yield of vertical GaP NWs and control over the NW surface density without a pre-patterned growth mask. Above that, we present the strategy for controlling both GaP NW length and diameter independently in single- or two-staged self-catalyzed growth. The proposed approach can be extended to other III-V NWs.