Marlena Ostrowska

Ms. Marlena Ostrowska

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 February 2025 in Polymers
Verified
Journal Article
Open access
PDF file
ASAlessandro Salvi
Alessandro Salvi
FMFrancesco Marzullo
Francesco Marzullo
MOMarlena Ostrowska
Marlena Ostrowska
Giovanni DotelliGiovanni Dotelli
Giovanni Dotelli
Polyamide-based glass fibre-reinforced composites are extensively used in electrical and automotive applications due to their excellent mechanical, thermal, and electrical properties. However, prolonged exposure to high temperatures can lead to significant degradation, affecting their long-term performance and reliability. This study investigates the thermal ageing behaviour of polyamide 6,6 composites containing halogenated flame retardants used for electrical applications. The objective of this research is to evaluate the extent of degradation through accelerated ageing tests and to develop an Arrhenius-type ageing model to predict the long-term performance of these materials. This study examines the effects of thermal ageing at temperatures between 160 and 210 °C on flexural properties and explores the underlying degradation mechanisms. Results indicate that short-term exposure to high temperatures can enhance flexural strength due to annealing effects, which are eventually outweighed by thermal oxidation and increased crystallinity, leading to an increase in brittleness. The derived Arrhenius model, with an activation energy of 93 kJ/mol, predicts a service life of approximately 25 years at 80 °C, but a significantly shorter one at 130 °C. These findings underscore the importance of considering thermal ageing effects in the design and application of PA66 composites in high-temperature environments.

1 July 2019 in Journal of Alloys and Compounds
Verified
Journal Article
Closed access
MOMarlena Ostrowska
Marlena Ostrowska
GCGabriele Cacciamani
Gabriele Cacciamani

22 October 2020 in Materials
Verified
Journal Article
Open access
PDF file
Roberto SpotornoRoberto Spotorno
Roberto Spotorno
MOMarlena Ostrowska
Marlena Ostrowska
SDSimona Delsante
Simona Delsante
UDUlf Dahlmann
Ulf Dahlmann
Paolo PiccardoPaolo Piccardo
Paolo Piccardo
A commercially available glass-ceramic composition is applied on a ferritic stainless steel (FSS) substrate reproducing a type of interface present in solid oxide fuel cells (SOFCs) stacks. Electrochemical impedance spectroscopy (EIS) is used to study the electrical response of the assembly in the temperature range of 380–780 °C and during aging for 250 h at 780 °C. Post-experiment analyses, performed by means of X-ray diffraction (XRD), and along cross-sections by scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis, highlight the microstructural changes promoted by aging conditions over time. In particular, progressive crystallization of the glass-ceramic, high temperature corrosion of the substrate and diffusion of Fe and Cr ions from the FSS substrate into the sealant influence the electrical response of the system under investigation. The electrical measurements show an increase in conductivity to 5 × 10−6 S∙cm−1, more than one order of magnitude below the maximum recommended value.

27 December 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
ASAlessandro Salvi
Alessandro Salvi
FMFrancesco Marzullo
Francesco Marzullo
MOMarlena Ostrowska
Marlena Ostrowska
Giovanni DotelliGiovanni Dotelli
Giovanni Dotelli
Polyamide-based glass fiber reinforced composites are extensively used in electrical and automotive applications due to their excellent mechanical, thermal, and electrical properties. However, prolonged exposure to high temperatures can lead to significant degradation, affecting their long-term performance and reliability. This study investigates the thermal ageing behavior of polyamide 6,6 composites containing halogenated flame retardants used for electrical applications. The objective of this research is to evaluate the extent of degradation through accelerated ageing tests and to develop an Arrhenius-type ageing model to predict the long-term performance of these materials. The study examines the effects of thermal ageing at temperatures between 160 and 210°C on flexural properties, and explores the underlying degradation mechanisms. Results indicate that short-term exposure to high temperatures can enhance flexural strength due to annealing effects, which are eventually outweighed by thermal oxidation and increased crystallinity, leading to an increase in brittleness. The derived Arrhenius model, with an activation energy of 93 kJ/mol, predicts a service life of approximately 25 years at 80°C, but significantly shorter at 130°C. These findings underscore the importance of considering thermal ageing effects in the design and application of PA66 composites in high-temperature environments.