To achieve a micro-destructive and rapid measurement of the wood density of standing trees, this study investigated the possibility of the unified modeling of multiple tree species, the reliability of the micro drilling resistance method for measuring wood density, the relationship between drilling needle resistance and wood density, and whether moisture content has a significant impact on the model. First, 231 tree cores and drill resistance data were sampled from Pinus massoniana, Cunninghamia lanceolate, and Cryptomeria fortunei. The basic density and moisture content of each core were measured, and the average value of each resistance data record was calculated. Second, the average drill resistance, the natural logarithm of average drill resistance, and absolute moisture content were used as independent variables, while the basic wood density was used as the dependent variable. Third, the total model of the three tree species and sub-model for each tree species were established through a stepwise regression method. Finally, the accuracy of each model was compared and analyzed with that of using the average basic density of each tree species as an estimated density. The estimated accuracy of the total model, sub model, and average wood density modeling data were 90.070%, 93.865%, and 92.195%, respectively. The results revealed that the estimation accuracy of the sub-model was 1.670 percentage points higher than that of the average wood density modeling data, while the estimation accuracy of the total model was 2.125 percentage points lower than that of the average wood density modeling data. Additionally, except for Cryptomeria fortunei, the natural logarithm of drill resistance significantly influenced the wood density model at a significance level of 0.05. Moreover, moisture content significantly affected the total model and sub-models of Pinus massoniana at a significance level of 0.05. The results indicated the feasibility of using the micro-drilling resistance method to measure the wood density of standing trees. Moreover, the relationship between wood density and drill resistance did not follow a linear pattern, and moisture content slightly influenced the drill needle resistance. Furthermore, the establishment of a mathematical model for each tree species was deemed essential. This study provides valuable guidance for measuring the wood density of standing trees through the micro-drilling resistance method.

Wood density is an important attribute that is positively correlated with many wood quality parameters. How to express wood density with drill resistance is a challenge. In this study, we determined the optimal resistance expression using the current, voltage, and power of the DC (Direct-Current) motor. Nine wood blocks crossing over the pith, with widths and heights of 2 cm and 5 cm, respectively, were obtained from three larch (Larix spp.) trees. The microdensity of each wood block at every 0.1-mm length was measured, and the average current, voltage, and power of the DC motor was recorded when the drill fed forward at every 0.1 mm by a self-manufactured resistance drill. The drill path was parallel to the lengthwise direction of the block. The linear models between the current, voltage, and power of the DC motor and wood microdensity were subsequently established, and the model with the highest R²_adj was selected to express the resistance. The adjusted R²_adj of the forward stepwise regression models between the current, voltage, and power of the DC motor and wood microdensity were determined as 0.2943. This suggests that the drilling needle resistance expressed with the current, voltage, and power or other combination may be optimal.

Individual modelling is a foundational approach to study the natural forest growth and in this paper, we develop a serial distance-depended individual tree model for some species in natural forest which would provide prediction and characteristics for natural species. The data used to develop individual model for natural mixed forests were collected from 712 remeasured 10-year periodic permanent sample plots of in Baihe Forest Bureau of Changbai Mountains, northeast China. Based on analyzing relationship between diameter increment of individual trees with tree size, competitive status, and site condition and finding out the major independent variables, the growth models for individual trees of 15 species in the natural mixed forests, that have good predicting precision, and easily applicable, were developed using stepwise regression method. The individual growth model developed in this study can reflect the tree increment of 15 species and be generally well suited for simulating tree and stand growth for natural mixed forests in Changbai Mountains. The research results for individual trees growth model of each species showed that main variable to influence on diameter increment of individual trees for natural mixed forests were tree size (D) and then competition index. The site condition was not related with diameter increment. The natural logarithm of DBH (lnD) and square diameter (D²) were included in the predicting models of diameter increment for all 15 species. The diameter increment was directly proportional to tree diameter for each species. For the competitive indexes in growth model, the relative diameter (RD), canopy closure (P), and the ratio of diameter of subject tree with maximum diameter (DDM) were related to diameter increment and the stand density measures were not significantly influenced on diameter increment. As canopy closure increase, tree increment decreases. The site conditions were performance less of factors in increment predictions in the model.