In order to study the static and dynamic mechanical characteristics of the coal gangue concrete used in the mine support structure, the compressive strength test, the drop weight impact test, and the Split Hopkinson Pressure Bar (SHPB) test were conducted. The compressive strength, initial and final impacting energy, dynamic strength, and failure characteristic of concrete were obtained of the concrete single‐doped with coal gangue coarse aggregate, single‐doped with coal gangue fine aggregate, and codoped with coal gangue coarse and fine aggregates. The results show that (1) it is feasible that employing coal gangue to replace natural coarse and fine aggregates in concrete can prepare C30 and C40 concrete; (2) the addition of coal gangue fine aggregate has a positive effect on the impact energy of the initial and final cracks of concrete, while the addition of coal gangue coarse aggregate has a negative effect on it; (3) compared with the static strength, the dynamic strength of concrete is improved no matter whether coal gangue is added to concrete; (4) the incorporation of coal gangue coarse aggregate will make the concrete shear surface smooth; (5) at the given impacting pressure, the concrete with coal gangue coarse aggregate has greater particle breakage and those with coal gangue fine aggregate has less. The research of this study can be a reference for the application of gangue concrete in mine support structures.

The penetration paths of grouts in sand layers are tortuous, and there is no reasonable penetration grouting theory at present. By employing tortuous circular tubes as the internal penetration pore channels of the sand layer, the cylindrical diffusion model is established for sand-layer penetration grouting. First, the permeability of porous media and average penetration velocity of Bingham slurry were deduced by considering tortuosity. Second, based on the penetration continuity equation, the active steady-state penetration differential equation of Bingham slurry and the pressure distribution function of slurry in the diffusion region were obtained. Finally, combined with the indoor penetration grouting test results, the attenuation law of slurry pressure and the influencing factors of diffusion radius were discussed. The results show that the cylindrical diffusion model of tortuous tubes can better characterize the diffusion process of penetration grouting in the sand layer. The stop condition for diffusion during penetration grouting is the reduction of the pressure gradient of the slurry to its starting value. The slurry pressure attenuation has obvious stages. The slurry pressure attenuation is faster in the area close to the grouting tube. At 50% of the maximum diffusion radius, the pressure attenuation is 70.01~75.41% of the total pressure attenuation within the diffusion region. Increasing the grouting pressure and permeability coefficient and reducing the slurry viscosity ratio can greatly increase the slurry diffusion radius. These results provide a theoretical basis for determining sand grouting parameters in the future.

To address the temperature cracking of concrete in frozen shaft linings in extra-thick alluvial layers in coal mines, a novel shaft lining structure of coal mines consisting of hybrid-fiber-reinforced concrete (HFRC) was developed. Using the Finite Element Method (FEM), a numerical simulation test of the HFRC shaft lining structure with four factors and three levels was carried out, and the mechanical characteristics of the shaft lining structure were obtained. The results show that under a uniform surface load, the maximum hoop stress position of the HFRC shaft lining presents a transition trend from the inside surface to the outside surface; the hoop strain of shaft lining concrete is always a compressive strain, and the inside surface is greater than the outside surface. The empirical formula for the ultimate capacity of this new type of shaft lining structure was obtained by fitting. Compared with the model test results, the maximum relative error of the calculated value is only 6.69%, which provides a certain reference value for designing this kind of shaft lining structure.

In engineering, loose sandy (gravelly) strata are often filled with cement-based grout to form a mixed material with a certain strength and impermeability, so as to improve the mechanical properties of sandy (gravelly) strata. The tortuosity effect of sandy (gravelly) strata and the time-varying viscosity of slurry play a key role in penetration grouting projects. In order to better understand the influence of the above factors on the penetration and diffusion mechanism of power-law slurry, based on the capillary laminar flow model, this research obtained the seepage motion equation of power-law slurry, the time-varying constitutive equations of tortuosity and power-law fluid viscosity were introduced, and the spherical diffusion equation of penetration grouting considering both the tortuosity of porous media and time-varying slurry viscosity was established, which had already been verified by existing experiments. In addition, the time-varying factors of grouting pressure, the physical parameters of the injected soil layer, and slurry viscosity on penetration grouting diffusion law and the influencing factors were analyzed. The results show that considering the tortuosity of sandy (gravelly) strata and the time-varying of slurry viscosity at the same time, the error is smaller than the existing theoretical error, only 13~19%. The diffusion range of penetration grouting in the sandy (gravelly) strata is controlled by the tortuosity of sandy (gravelly) strata, the water–cement ratio of slurry, and grouting pressure. The tortuosity of sandy (gravelly) strata is inversely proportional to the diffusion radius of the slurry, and the water–cement ratio of slurry and grouting pressure are positively correlated with the diffusion radius. In sandy (gravelly) strata with a smaller particle size, the tortuosity effect of porous media dominates the slurry pressure attenuation. When the particle size is larger, the primary controlling factor of slurry pressure attenuation is the tortuosity effect of porous media in the initial stage and the time-varying viscosity of slurry in the later stage. The research results are of great significance to guide the penetration grouting of sandy (gravelly) strata.

In slurry pipe jacking, lubricant slurry is commonly used to sustain against the displacement and pressure of the overcut area and reduce the interface friction of pipelines. Therefore, a reasonable grouting pressure should ensure the stability of surrounding soils, which is raised as a new method in this study. Not only ensure the grouting pressure is not too small to support the stratum effectively and reduce the frictional resistance but also ensure that the grouting pressure will not be too large to produce excessive deformation and affect the surrounding environment. First of all, the influence of grouting pressure on the stability of surrounding soil is analyzed, and the mechanical model of slurry grouting expansion is established. Then, the minimum grouting pressure is designed from the critical balance between radial expansion tension by grouting and loose earth pressure by jacking excavation, and the maximum grouting pressure is designed from the critical expansion pressure caused by grouting splitting. Finally, the rationality of grouting pressure design is proved by the engineering example of a slurry pipe-jacking project near Haikou Meilan Airport and on-site GPR detection test. All these work aims to raise a new theoretical solution of grouting pressure and provide theoretical reference for similar projects.

In order to meet increasing demand for building energy, the coaxial borehole heat exchanger (CBHE) is proposed as an efficient and environmentally friendly geothermal energy-utilization device, but there is no suitable analytical model for its heat exchange analysis. Hence, an analytical model of CBHE with segmented method that can consider the non-uniformity of the thermal conductivity of outer soil is proposed. First, the heat-transfer models inside and outside the borehole are introduced, respectively; then, on the basis of time superposition and the segment cylinder-source method, using borehole-wall temperature as an intermediate quantity, the two models were coupled as a three-dimensional model; then, the corresponding calculation principle and calculation process of the model are introduced. After that, through a comparison between experiment- and numerical-analysis results, the rationality of the analytical model was verified on the basis of thermal-response-test (TRT) results and temperature distribution along with the depth. In addition, it can conclude that the analytical model has higher calculating efficiency than the numerical analysis on the premise of maintaining accuracy. Lastly, the effect of the thermal conductivity of the inner and outer pipes, backfill material, and outer soil on the heat-exchange efficiency of CBHE was studied, and the results showed that, for the inner pipe, as thermal conductivity increased, the heat-transfer efficiency of CBHE gradually decreased; for the outer tube, backfill material, and outer soil, as thermal conductivity increased, the heat-transfer efficiency of CBHE increased. The influence of material thermal conductivity on the heat-transfer effect of CBHE was in the descending order of outer pipe, backfill material, inner pipe, and outer soil. Besides, we concluded that a CBHE with an annular region as inlet had better heat-exchange efficiency than that with a round region as inlet. The most optimized design of CBHE (considering heat-exchange and economic efficiency) is that with an inner pipe with low thermal conductivity, thermal conductivity of the outer pipe larger than that of the backfill material, thermal conductivity of the backfill material larger than that of the outer soil, and the outer soil is in the area being rich in groundwater.