To investigate the effect of polyvinylpyrrolidone (PVP) addition and consequently porosity, two different sets of membranes are manufactured, since PVP is a widely used poring agent which has an impact on the mechanical properties of the membrane material. The first set (PAN 1) includes polyacrylonitrile (PAN) and the necessary solvent while the second set (PAN 2) is made of PAN and PVP. These membranes are put through several characterisation processes including tensile testing. The obtained data are used to model the static behaviour of the membranes with different geometries but similar loading and boundary conditions that represent their operating conditions. This modelling process is undertaken by using the finite element method. The main idea is to investigate how geometry affects the load-carrying capacity of the membranes. Alongside membrane modelling, their materials are modelled with representative elements with hexagonal and rectangular pore arrays (RE) to understand the impact of porosity on the mechanical properties. Exploring the results, the best geometry is found as the elliptic membrane with the aspect ratio 4 and the better RE as the hexagonal array which can predict the elastic properties with an approximate error of 12%.

In this study, neat polyacrylonitrile (PAN) and fumed silica (FS)-doped PAN membranes (0.1, 0.5 and 1 wt% doped PAN/FS) are prepared using the phase inversion method and are characterised extensively. According to the Fourier Transform Infrared (FTIR) spectroscopy analysis, the addition of FS to the neat PAN membrane and the added amount changed the stresses in the membrane structure. The Scanning Electron Microscope (SEM) results show that the addition of FS increased the porosity of the membrane. The water content of all fabricated membranes varied between 50% and 88.8%, their porosity ranged between 62.1% and 90%, and the average pore size ranged between 20.1 and 21.8 nm. While the neat PAN membrane’s pure water flux is 299.8 L/m² h, it increased by 26% with the addition of 0.5 wt% FS. Furthermore, thermal gravimetric analysis (TGA) and differential thermal analysis (DTA) techniques are used to investigate the membranes’ thermal properties. Finally, the mechanical characterisation of manufactured membranes is performed experimentally with tensile testing under dry and wet conditions. To be able to provide further explanation to the explored mechanics of the membranes, numerical methods, namely the finite element method and Mori–Tanaka mean-field homogenisation are performed. The mechanical characterisation results show that FS reinforcement increases the membrane rigidity and wet membranes exhibit more compliant behaviour compared to dry membranes.

In this study, four different membranes were fabricated by using polyetherimide and polyacrylonitrile polymers, N-methyl-2-pyrrolidone and polyvinylpyrrolidone (PVP) via phase inversion method to improve the membrane performance in fruit juice wastewater (FJWW) treatment. The addition of PVP to the casting solution increased membrane hydrophilicity, water content, contact angle, porosity, Fourier transform infrared spectroscopy peaks, membrane thickness, average roughness and viscosity of cast solutions compared to the bare membrane. It can be said that the addition of a lower polymer concentration and PVP intensively increases the pure water flux of the membrane. However, as the flux increased, a small decrease in FJWW rejection was observed.

Many treatment methods are used to remove iron and manganese from water. Aeration and membrane filtration are two of these methods. In this study, Fe²⁺ and Mn²⁺ removal by aeration with different catalysts and instead of simple membrane filtration applied in other studies, the aerated-submerged membrane systems were evaluated separately. When Fe(OH)₃ was applied in the aeration step and complete oxidation of Fe²⁺ was obtained after 27 min, while complete Mn²⁺ oxidation was obtained in 76 min. However, when MnO₂ was applied in the aeration step, complete oxidation of Fe²⁺ and Mn²⁺ was relatively slow (36 and 110 min, respectively). According to the results obtained from the aerated membrane system, Fe²⁺ and Mn²⁺ removal were extended by Fe(OH)₃ via adsorption/surface oxidation. It is clearly shown from the flux, resistance results, scanning electron microscope (SEM) and Fourier transform infrared (FT/IR) spectroscopy observation that manganese oxides were deposited mainly in membrane pores forming membrane fouling by small flocs, while iron oxide particles were deposited on the membrane surface. Although the flux performance of PT PES membrane was higher than HF PP membrane, fouling resistance of HF PP membrane was higher than PT PES.

This study is aimed to investigate culturable airborne bacteria concentrations and the composition of methicillin-resistant staphylococci in eleven different locations on the basis of specific activities conducted within different parts of the European side of Istanbul. The highest bacterial levels were observed at the Bakirkoy station (1 100 CFU/m³) while the second highest levels were found at the Bahcelievler station (1 040 CFU/m³) in October; the lowest levels (10 CFU/m³) were measured at other different stations (Atakoy, Yesilkoy). Fifteen methicillin-resistant isolates [Staphylococcus hominis (n=11), S. cohnii spp. cohnii (n=2), S. sciuri (n=1), S. capitis spp. capitis (n=1)] were identified. The disc diffusion method was used to identify the antimicrobial resistance of these isolates, it was observed that the most common resistance was to penicillin (P) (n=11), doxycycline (DO) (n=4) and tetracycline (T) (n=5). None of the isolates was resistant to imipenem, amoxicillin/clavulanic acid, vancomycin (IPM, AMC, VA). However, multiple antimicrobial resistance was found to be 26.7%. The results of this study revealed the importance of isolated methicillin-resistant staphylococci in the stations with densely active human population and traffic, for public health. As a result, the importance of resting along known shorelines, where culturable airborne bacteria concentrations are much lower, and its importance for human health have been emphasized.