The development of high-speed nanoindentation has enabled the acquisition of mechanical property maps over square millimeters of area with micron-scale resolution in reasonable amounts of time. This provides rich datasets which contain morphological and statistical data on the variation of mechanical properties in a microstructure. However, the influences of the indentation size and the deconvolution method employed on the extracted phase properties remain unclear. In this work, a range of depth/spacing increments was explored on two different materials systems, an Al-Cu eutectic alloy and a duplex stainless steel, representing an ‘easy’ and a ‘hard’ case for statistical deconvolution, respectively. A total of ~ 500,000 indentations were performed. A variety of statistical analyses were then employed and compared: the 1D analysis of Ulm et al. using 2 and 3 phases, a 2D rotated Gaussian fit, K-means clustering, and a visual comparison to 2D histograms. This revealed several different sensitivities of the deconvolution methods to various types of error in phase identification. Graphic

This study aimed to evaluate the corrosion properties of different samples coated by the laser-cladding method to find the optimal laser parameters. Thereby, potentiodynamic polarization (Tafel) and electrochemical impedance tests were performed to assess the corrosion resistance of coated samples. Consequently, the corrosion morphology of tested samples was inspected by scanning electron microscopy. The results demonstrated that the laser power directly correlates with pitting corrosion and defects on the surface of the samples. Moreover, when molybdenum and chromium ions are increased in the electrolyte solution, the passive and protective layers are more durable, as the ions are sited within the holes and defects, reducing the surface corrosion rate.

The microstructure and micromechanical properties of the constitutive phases of a particular duplex stainless steel in various processing conditions have been characterized. Hardness (H), elastic modulus (E) and H/E cartography maps were obtained by using a high-speed nanoindentation mapping technique. Small-scale H and E evolution at different processing conditions has been investigated by statistical analysis of a large number of nanoindentations (10,000 imprints per sample). Two mechanically distinct phases, ferrite (α) and austenite (γ), were deconvoluted from this dataset using Ulm and Constantinides’ method, with the remaining values assigned to a third mechanical phase linked to composite-like (containing α/γ interphase boundaries) regions. These mechanical property phase assessments were supplemented by overlaying crystallographic phase maps obtained by electron backscattered diffraction. An excellent correlation between microstructure and small-scale mechanical properties was achieved, especially when considering the ratio H/E.