Traditional design optimization methods for permanent magnet linear synchronous motor (PMLSM) always pursuit the optimal value without considering the influence of uncertainties (manufacturing errors, use wear etc.), which will result in big fluctuations for the stability of motor thrust performance. This paper proposes a new filled function algorithm (NFFA) to improve the stability of PMLSM. First, an analytical model of thrust ripple is established. Second, a sigma level stability criterion is proposed, which will be used to judge the robustness of optimal thrust ripple, and a new global robust algorithm NFFA is studied to realize the stability of thrust ripple by managing the sigma level stability criterion as the convergence criterion of traditional filled function optimization algorithm (TFFA). Third, the NFFA is used to optimize the PMLSM. The optimization results are proven to be stability and superiority compared with other methods. Finally, experiments confirm the feasibility of the proposed method.
Huizhou-style ancient architecture was one of the most important genres of architectural heritage in China. The architecture employed bricks, woods, and stones as raw materials, and timber frames were significant structures. Due to the drawback that the timbers were vulnerable to moisture and atmospheric agents, ancient timber buildings needed frequent protective interventions to maintain its good condition. Such interventions unavoidably disrupted the consistency between the original timber components. Besides this, the modifications brought about difficulty in correctly analysing and judging the state of existing ancient buildings, which, in current preservation practices, mainly rely on the expertise of skilled craftsmen to classify wood species and to identify the building-age of the timber components. Therefore, the industry and the research community urgently need a technique to rapidly and accurately classify wood materials and to discriminate building-age. In the paper, we designed an eye-safe 81-channel hyperspectral LiDAR (HSL) to tackle these issues. The HSL used an acousto-optic tunable filter (AOTF) as a spectral bandpass filter, offering the HSL measurements with 5 nm spectral resolution. Based on the HSL measurements, we analysed the relationship between the surface and cross-section spectral profiles of timber components from different ancient architectures built in the early Qing dynasty (~300 years), late Qing dynasty (~100 years), and nowadays, and confirmed the feasibility of using surface spectra of timber components for classification purpose. We classified building-ages and wood species with multiple Naive Bayes (NB) and support vector machine (SVM) classifiers by the surface spectra of timber components; this also unveiled the possibility of classifying gnawed timber components from its spectra for the first time. The encouraging experimental results supported that the AOTF-HSL is feasible for historic timber building preservation.
13 December 2021 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Wood–leaf separation aiming at classifying LiDAR points into wood and leaf components is one of the most important genres for improving leaf area index estimation and forestry survey accuracy. The wood return signals could artificially increase the apparent foliage content, which needs to be screened out for deriving vital tree attributes accurately. Previous research works tended to use intensity, waveform, and geometric information extracted from a single wavelength LiDAR for wood–leaf separation. This article employs a revised hyperspectral LiDAR (HSL) to obtain spatial and ultrawide spectral data simultaneously. We also propose a simple three steps method to separate wood and leaf components based on HSL spatial and spectral measurements under the laboratory circumstances. First, the preprocessing is conducted to acquire 3-D spatial information and the multiband laser pulse reflectance for further separation. Second, preliminary separation (band division, key feature parameter calculation, and judgment) is implemented based on reflectance. Third, we employ K-Nearest Neighbor (KNN) method to enhance separation results based on preliminary separation results and spatial features and then update the results by recorrection. Then, 3-D reconstruction is accomplished by fusing wood–leaf separation results. The experimental results demonstrate that the proposed method can separate wood and leaf components with high accuracy and indicate tree attributes straightforwardly.
Hyperspectral LiDAR (HSL) has been widely discussed in recent years, which attracts increasing attention of the researchers in the field of electronic information technology. With the application of supercontinuum laser source, it is now possible to develop an HSL system, which can collect spectral and spatial information of targets simultaneously. Meanwhile, eye-safety and miniature HSL device with multiple spectral bands are given more priorities in on-site applications. In this paper, we tempt to investigate how to select spectral bands with a selection method. The proposed method consists of three steps: first, the variances among the classes based on hyperspectral feature parameters, termed inter-class variances, are calculated; second, the channels are sorted based on corresponding variances in descending order, and those with the two highest values are adopted as the initial input of classification; finally, the channels are selected successively from the rest of the sorted sequence until the classification accuracy reaches 100%. To test the performance of the proposed method, we collect 91/71-channel hyperspectral measurements of four different categories of materials with 5 nm spectral resolution using an acousto-optic tunable filter (AOTF) based HSL. Experimental results demonstrate that the proposed method could achieve higher classification accuracy than a random band selection method with different classifiers (naïve Bayes (NB) and support vector machine (SVM)) regardless of classification feature parameters (echo maximum and reflectance). To reach 100% accuracy, it demands 8–9 channels on average by echo maximum and 4–5 channels on average by reflectance based on NB classifier; these figures are 3–4 by echo maximum and 2–3 by reflectance with SVM classifier. The proposed method can complete classification task much faster than the random selection method. We further confirm the specific channels for the classification of different materials, and find that the optimal channels vary with different materials. The experimental results prove that the optimal band selection of HSL system for classification is reliable.