This synopsis presents the state‐of‐the‐art of peristaltic pump systems in biomimetics and living nature, and allows for a comparison by highlighting the differences in structure and function, as well as advantages and drawbacks for technical implementation. For the first time, data of selected biological examples are collected in one study to give a comprehensive overview of the performance of biological peristaltic pumps. The developed biomimetic pumping systems not only mimic the biological principle and by this inherit its advantages, but also show the usability of the principle in various pumping applications and medical research. A direct comparison of peristaltic pump systems in nature, biomimetics, and technology highlights their similarities, differences, and allows for proposing new fields of application.

Three- and four-dimensional imaging techniques are a prerequisite for spatially resolving the form–structure–function relationships in plants. However, choosing the right imaging method is a difficult and time-consuming process as the imaging principles, advantages and limitations, as well as the appropriate fields of application first need to be compared. The present study aims to provide an overview of three imaging methods that allow for imaging opaque, large and thick (>5 mm, up to several centimeters), hierarchically organized plant samples that can have complex geometries. We compare light microscopy of serial thin sections followed by 3D reconstruction (LMTS3D) as an optical imaging technique, micro-computed tomography (µ-CT) based on ionizing radiation, and magnetic resonance imaging (MRI) which uses the natural magnetic properties of a sample for image acquisition. We discuss the most important imaging principles, advantages, and limitations, and suggest fields of application for each imaging technique (LMTS, µ-CT, and MRI) with regard to static (at a given time; 3D) and dynamic (at different time points; quasi 4D) structural and functional plant imaging.

Branching in plants is one of the most important assets for developing large arborescent growth forms with complex crowns. While the form and development of branching in gymnosperms and dicotyledonous trees is widely understood, very little is known about branching patterns and the structure of branch–stem-junctions in arborescent monocotyledons. For a better and quantitative understanding of the functional morphology of branch–stem-junctions in arborescent monocotyledons, we investigated the two speciesDracaena reflexaandFreycinetia insignis. WhileD. reflexais able to develop large arborescent forms with conspicuous crowns by anomalous secondary growth,F. insignisremains relatively small and is only capable of primary growth. Biomechanical investigations were performed by applying vertical loads up to rupture to lateral branches of both species. This allows the analysis of the fracture mechanics and the determination of the maximal force, stress and strain at rupture as well as the fracture toughness. Functional morphology was correlated with the mechanical behaviour of these plants and compared to data of other dicotyledonous trees. The high energy absorption found in the rupture process of lateral branches ofD. reflexaandF. insignismakes them promising biological concept generators with a high potential for biomimetic implementation, i.e., for the development of branched fibre-reinforced technical composites. A wide range of constructional elements with branched (sub-)structures can be optimised by using solutions inspired by plant ramifications, e.g., in automotive and aerospace engineering, architecture, sports equipment and prosthetic manufacturing.

The Opuntioideae include iconic cacti whose lateral branch–branch junctions are intriguing objects from a mechanical viewpoint. We have compared Opuntia ficus-indica, which has stable branch connections, with Cylindropuntia bigelovii, whose side branches abscise under slight mechanical stress. To determine the underlying structures and mechanical characteristics of these stable versus shedding cacti junctions, we conducted magnetic resonance imaging, morphometric and anatomical analyses of the branches and tensile tests of individual tissues. The comparison revealed differences in geometry, shape and material properties as follows: (i) a more pronounced tapering of the cross-sectional area towards the junctions supports the abscission of young branches of C. bigelovii. (ii) Older branches of O. ficus-indica form, initially around the branch–branch junctions, collar-shaped periderm tissue. This secondary coverage mechanically stiffens the dermal tissue, giving a threefold increase in strength and a tenfold increase in the elastic modulus compared with the epidermis. (iii) An approximately 200-fold higher elastic modulus of the vascular bundles of O. ficus-indica is a prerequisite for the stable junction of its young branches. Our results provide, for both biological and engineered materials systems, important insights into the geometric characteristics and mechanical properties of branching joints that are either stable or easily detachable.

The anatomy of young and old stems of Aristolochia macrophylla has been investigated for a better understanding of how secondary growth processes cause changes in the stem anatomy of a lianescent plant. In A. macrophylla, following an increase in volume of secondary vascular tissues, the cortical tissues are deformed and the outer sclerenchymatous cylinder ruptures. Morphometric measurements prove that the inner zone of the cortical parenchymatous tissue is compressed prior to the rupture of the outer sclerenchymatous cylinder. After the rupture has occurred, the radial width of the inner primary cortex slightly increases again. This could be caused by strain relaxation, suggesting that the inner primary cortex mechanically behaves similarly to cellular technical foam rubbers. Two different experiments were undertaken to test the outer cortical cylinders mechanically. The outer cortical cylinders comprise the outer sclerenchymatous cortical tissue and a collenchymatous sheath underneath the epidermis and the epidermis. In a first experiment, transverse compression loads were applied to the outside of the cortical cylinders causing ovalization of the cylinder until failure. This experiment allowed the Young's Modulus of the outer cortical cylinders to be determined. In a second set of experiments, radial hydraulic pressure was applied to the inside of the cortical cylinders, mimicking the mechanical effects of internal growth processes. The increase of the internal pressure finally led to rupture of the cortical cylinders. The circumferential stresses acting on the inner surface of the cortical cylinders were calculated. These data allow quantitative estimates of the radial and circumferential pressures effected by vascular secondary growth processes during ontogeny in A. macrophylla stems. The experimental results further indicate that the outer sclerenchymatous cylinder is the main contributor to mechanical stability of young A. macrophylla stems.

The development of enhanced processes for filtration is one solution for stopping the increasing freshwater and sea pollution caused by microplastic and microfibers. Major contributors to micro-X pollution are domestic devices such as washing machines, which also hold a high technical potential for separating problematic soils from waste water during cleaning cycles. The focus of the present paper are the biomimetic development of a novel concept for filtration and removal of particles such as microfibers in conventional washing machines. To this goal, a TRIZ analysis yielded viable solutions for the major key issues. In a next step, measurements were made with various filters with and without ribbed structures. The results are promising for the incorporation in a filter concept that is easy to operate and cost-effective.