Firefighting in high-rise buildings remains a difficult problem in the world because fire extinguishing equipment and tactics have many deficiencies in dealing with such building fires, especially for buildings higher than 50 m. In the present study, the LY100 fire extinguishing system is taken as an example to introduce the application of the fire drone in the fire control of high-rise buildings. The LY100 fire extinguishing system mainly contains the twin-rotor drone, high-pressure liquid fire extinguishing equipment, pressure fire extinguishing equipment, associated vehicle and extinguishing agent. The LY100 system can be deployed quickly and operated flexibly. Based on such advantages, the indoor fire, exterior thermal insulation layer fire and top platform fire of high-rise building can be extinguished in a timely manner with the LY100 system. In addition, four kinds of firefighting tactics are described in this paper, including one drone operation, double drone cooperative operation, three or more drone cooperative operations, and cooperating with the lifting fire truck. Finally, the experiments are presented to verify the spraying distance of the fire drone system.
Fire incidents in energy storage stations are frequent, posing significant firefighting safety risks. To simulate the fire characteristics and inhibition performances by fine water mist for lithium-ion battery packs in an energy-storage cabin, the PyroSim software is used to build a 1:1 experimental geometry model of a containerized lithium-ion energy storage cabin. The simulation reveals five stages and their characteristic parameter variations during a fire incident: initial temperature rise, flame generation, flame spread, stable combustion, and flame extinguishment. By adjusting various parameters of the fine water mist, the design of the fine water mist firefighting system for containerized energy storage units is optimized. The simulation results indicate that the optimal inhibition effect for the energy storage cabin's fine water mist firefighting system is achieved when the spray intensity is ≥24 l/min, the fog cone angle is 76°, nozzle velocity is 10 m/s, and the optimal particle size of the fine water mist is 50 μm. The research findings not only provide a rational method and theoretical guidance for the numerical simulation of thermal runaway in lithium batteries but also offer theoretical data support for the safety design and protection of future energy storage cabins.
11 February 2025 in Process Safety and Environmental Protection
Predrainage of gas by cross‐boreholes is an important method to prevent coal and gas outbursts in the process of a coal roadway excavation. Limitations of technologies and poor effects of preventing coal and gas outbursts occur in the coal seam with a soft layer. In this study, a new hydraulic caving technology for cross‐boreholes has been proposed to solve this problem. A CT equipment was used to observe the development of coal fissures around cross‐boreholes in the coal seam with a soft layer. The plastic zone range and permeability distribution of ordinary hydraulic slotting technologies and the new hydraulic caving technology also were compared by numerical simulation. The field test of hydraulic caving was taken in the Xuehu Mine (China). The results show that the fracture development degree of soft coal is greater than that of hard coal at the same distance from cross‐boreholes. The fracture development degree in the plastic zone is greater than that in the elastic zone. The hydraulic caving technique can achieve the same effect as the ordinary hydraulic slotting with less workload. The mass of coal discharged from a cross‐borehole was 1.15 t/m and the average methane concentration of single drainage borehole increased by 1.09‐4.1 times, and the average methane extraction amount of single drainage borehole increased by 6.06 times. Elimination of coal and gas outburst had been completed after 110 days of extraction in the area of hydraulic caving, and Q and S values are lower than the critical value during roadway excavation. It is conclusion that hydraulic caving technique can effectively improve the permeability and rapidly eliminate coal and gas outburst in the coal seam with a soft layer.