Background and Objectives: The aims of this systematic review were to identify additional infection control measures implemented in dental practice globally to prevent cross-infection and evaluate the psychological impacts of the pandemic among dental professionals. Materials and Methods: A sequential systematic literature search was conducted from December 2019 to 30 April 2020 through PubMed, CINAHL, Scopus, Google Scholar, Embase, and Web of Science databases. The search yielded the following results: “COVID-19” (n = 12,137), “Novel corona virus” (n = 63), “COVID-19 and dentistry” (n = 46), “COVID-19 and oral health” (n = 41), “Novel Corona virus and Dentistry” (n = 0), “dental health and Novel Coronavirus” (n = 26), and “dental practice and Novel Coronavirus” (n = 6). Results: After a careful review and eliminating articles based on inclusion and exclusion criteria, the final review included 13 articles. Management of infection control is discussed extensively in the literature and remains the main theme of many Coronavirus Disease 2019 (COVID-19) articles on dentistry. Telephone triage using a questionnaire, hand hygiene, personal protective equipment (PPE) for clinical and nonclinical staff, a preprocedural mouth rinse, and aerosol management have been discussed and implemented in few countries. Three studies recommended that elective treatments for patients with a temperature of >100.4 F or 38 °C should be postponed or performed in an airborne infection isolation room (AIIR) or negative-pressure room. Limiting the number of patients in the waiting area, the removal of shared objects, proper ventilation, and physical distancing were highly recommended. Psychological distress among dental professionals in relation to existing medical conditions and self-efficacy has been discussed. Conclusions: Although the COVID-19 pandemic has had a substantial impact on the dental profession worldwide, our review highlights many practice management approaches to adopt the new norm. More research highlighting evidence-based safety practices and multisectoral collaboration is required to help dental professionals make informed decisions and make the profession safe, both for the patient and dental professionals.
To quantify participation in dental research activities in Malaysia, and investigate its association with socio-demographic and professional characteristics, and perceptions of research and development (R&D) culture. Dental academics in Malaysian dental schools were invited to complete a questionnaire by email and post. The survey comprised questions on research activities in the past 12 months, socio-demographic and professional characteristics, and the R&D Culture Index. Principal components factor analysis was carried out to confirm the factor structure of the R&D Culture Index. Chi-square test was used to identify association of research activities with R&D culture, and socio-demographic and professional characteristics. Binary logistic regression was carried to identify predicators of research activities. Of 256 potential participants contacted, 128 (50%) useable responses were returned. Three R&D Culture factors accounting for 57.4% of variance were extracted. More positive perception of R&D Support was associated with Malaysians (0.025) and those employed in Government schools (0.017). R&D Skills and Aptitude were associated with older respondents (0.050), PhD qualification (0.014) and more years in academia (0.014). R&D Intention was associated with any of the socio-demographic characteristics. Thirty (23.4%) respondents reported a peer-review research publication in the past 12 months, which was associated with having a PhD (OR 12.79, CI 1.28-127.96), after adjustment in regression analyses. Postgraduate research training should be encouraged to promote participation in research activities. R&D culture did not appear to impact on research productivity. Other factors such as individual attitudinal interests should be studied.
This article describes the development and testing of an online asynchronous clinical learning resource named “Ask the Expert” to enhance clinical learning in dentistry. After the resource development, dental students from years 3 and 4 were randomly allocated to two groups (Group A—“Ask the Expert” and L—“lecturer-led”). All the students attempted a pre-test related to replacement of teeth in the anterior aesthetic zone. Group A (33 students) underwent an online case-based learning session of 60 minutes’ duration without a facilitator, while Group L (27 students) concurrently underwent a case-based learning session of 60 minutes’ duration with a lecturer facilitating the session. An immediate post-test was conducted followed by a retention test after one week. Student feedback was obtained. There was a significant increase in the test scores (maximum score 10) for both groups when comparing the pre-test (Group A—5.61 ± 1.34, Group L—5.22 ± 1.57) and immediate post-test scores (Group A—7.42 ± 1.34, Group L—8.04 ± 1.22; paired t-test, p < 0.001). However, no significant difference was observed in the test scores when comparing Group A to Group L for both the immediate post-test as well as the retention test (Group A—5.36 ± 1.29, Group L—5.33 ± 1.39 (independent sample t-test, p > 0.05). To conclude, adequately structured online asynchronous learning resources are comparable in their effectiveness to online synchronous learning in the undergraduate dental curriculum.
1 January 2022 in International Journal of Dentistry
Introduction. The purpose of this review is to compare randomized clinical trials evaluating the patient‐reported outcome measures (PROMs) using different unsplinted attachment systems in 2‐implant‐retained mandibular overdentures (2IRMODs). A focus question (as per PICOS) was set as follows: does one particular unsplinted attachment system (I) compared with another (C) result in better patient‐reported outcomes (O) in two‐implant‐retained mandibular overdentures (P) using randomized controlled trials (S)? Materials and Methods. A literature search was conducted in the PubMed MEDLINE and Cochrane Central Register of Controlled Trials (CENTRAL) databases between November 2010 and October 2020. Only randomized controlled trials (RCTs) on 2IRMOD using unsplinted attachment systems measuring patient‐centered outcomes were selected. A total of 171 studies were identified in initial search, and 27 studies were shortlisted for full‐text evaluation. A total of 5 studies were included for a systematic review. The risk of bias was evaluated using Cochrane Risk of Bias Tool 2.0 (RoB 2.0). Meta‐analysis could not be performed as different studies evaluated different patient‐reported outcomes, namely, satisfaction, quality of life, complications, preferences, or combinations of these. Results. A total of 23 patients received low‐profile (self‐aligning) attachments (in 2 studies), 69 patients received standard ball attachments (in 5 studies), 25 patients received telescopic (or conus) attachments (in 2 studies), and 20 patients received mini‐ball attachments (in 1 study). Two studies compared ball attachments and low‐profile attachments and revealed similar satisfaction and quality of life (QoL). Two studies compared ball attachments with telescopic attachments and revealed less patient satisfaction in telescopic attachments. A single study compared mini‐ball attachments with standard ball attachments and showed no difference in patient‐reported outcomes. Three studies were found to have a low risk of bias, and the remaining two studies had a high risk of bias. Conclusions. The standard ball, mini‐ball, and low‐profile attachments have no influence on PROMs in the normal interarch space. Inconclusive results were found in studies that evaluated PROMs using ball attachments versus telescopic attachments.
As artificial atoms, quantum dots are widely used in quantum information research since their individual energy levels may be precisely controlled using gate voltages. The purpose of the study was to modify carbon quantum dots (CQDs) and evaluate its effects on the structure, crystal orientation and mechanical properties of the enamel substrate along with antibacterial properties of CQDs. Enamel specimens of 4 mm × 4 mm × 3 mm were cut and CQD solution was dialyzed in deionized water mixed with urea solution and placed in microwave system (800 W) to obtain *CQD0.1 %-, **CQD0.2 %-, ***CQD0.3 %-, and *****CQD0.5 % for enamel blocks to be immersed for 2 weeks. X-ray diffraction analysis and density-functional theory (DFT) calculations were performed to determine degree of phase purity. Transmission electron microscopy (TEM) was used for imaging of CQDs and treated enamel, with zeta potential measured with Zetasizer. Raman spectra was acquired with spectral range of 400-2000 cm-1. Atomic force microscopy was performed with a peak force set at 200 nN. Lactobacillus biofilm was prepared on treated enamel substrates and analysed using confocal, scanning electron microscopy and TEM. DFT calculations summarised improved lattice parameters of HAp***CQD0.3 %- and HAp***CQD0.5 %-. Zeta potential is least for salineS and is maximum for *****CQD0.5 %- distributed system. The salineS, and *CQD0.1 %- groups had comparable v₁PO₄³⁻ value, indicating consistent phosphate intensities. TEM successfully verified carbon dots as spherical. Enamel crystals aligned their c-axis perpendicular to the electron beam within 1° with CQDs treated specimens exhibiting misoriented-crystals. *****CQD0.5 %- group had highest elastic modulus and nano hardness with maximum shear stress. Calculated bond length and angles using XRD show higher measures (p < 0.05) in all CQD groups. *****CQD0.5 %- exhibited a fibre texture pattern with an orientational distribution resembling an angle distortion. Most bacteria in the biofilms fluoresced red in CQD groups with no colony chain formations observed with *****CQD0.5 %- group. CQDs assemblies were observed to cause explosive lysis through loss of cell integrity. *****CQD0.5 %- modified enamel substrate displayed significant crystallite changes providing a novel option for fabrication of diverse functional CQDs aimed at modification of enamel tissue while possessing optimum antimicrobial properties.