On Juni 21, 2010 the still unique TanDEM-X mission was launched and opened a new era in spaceborne radar remote sensing. The first formation flying radar system was built by extending the TerraSAR-X synthetic aperture radar (SAR) mission by a second, TerraSAR-X-like satellite TanDEM-X. The resulting large single-pass SAR interferometer features flexible baseline selection enabling the acquisition of highly accurate cross-track interferograms. The primary objective was the generation of a global Digital Elevation Model (DEM) with unprecedented accuracy (12 m horizontal resolution and 2 m relative height accuracy). While the main mission phase for DEM data acquisition has been finished in 2014, the processing of the global TanDEM-X DEM was concluded in September 2016. The final DEM is well within specifications and features an extremely low percentage of void areas. The scientific exploitation of TanDEM-X is not limited to the DEM and the unique capabilities enable numerous secondary mission objectives based on along-track interfero-metry as well as new bistatic and multistatic SAR techniques. Comparisons of the TanDEM-X DEM with SRTM [1] or of multi-temporal TanDEM-X data revealed dramatic changes and the high dynamic in the Earth's topography. It has been therefore decided to acquire data for a global change layer and the so-called change DEM will become available in 2021. Despite being well beyond their design lifetime, both satellites are still fully functional and have enough consumables for several additional years. Therefore, bistatic operations continue with a focus on changes in the cryosphere and biosphere.
11 July 2018 in IEEE Transactions on Geoscience and Remote Sensing
This paper presents a nonlocal interferometric synthetic aperture radar (InSAR) filter with the goal of generating digital elevation models (DEMs) of higher resolution and accuracy from bistatic TanDEM-X strip map interferograms than with the processing chain used in production. The currently employed boxcar multilooking filter naturally decreases the resolution and has inherent limitations on what level of noise reduction can be achieved. The proposed filter is specifically designed to account for the inherent diversity of natural terrain by setting several filtering parameters adaptively. In particular, it considers the local fringe frequency and scene heterogeneity, ensuring proper denoising of interferograms with considerable underlying topography as well as urban areas. A comparison using synthetic and TanDEM-X bistatic strip map data sets with existing InSAR filters shows the effectiveness of the proposed techniques, most of which could readily be integrated into existing nonlocal filters. The resulting DEMs outclass the ones produced with the existing global TanDEM-X DEM processing chain by effectively increasing the resolution from 12 to 6 m and lowering the noise level by roughly a factor of two.
10 October 2017 in IEEE Transactions on Geoscience and Remote Sensing
The TanDEM-X mission is the first free flying bistatic SAR mission. It has the primary objective to generate within a short time frame a global digital elevation model (DEM) of 10-m absolute vertical accuracy and 2-m relative height accuracy. For that, the whole land mass has been mapped at least twice with different baselines. The success of the mission depends on the accuracy of the final DEM and therefore on the reliability of the phase unwrapping (PU) algorithm. Hence, a robust and versatile PU method, which is in accordance with the acquisition concept, is necessary. This paper presents a new method that combines bistatic high-resolution interferometric data in order to perform an accurate PU on a huge amount of data. The dual-baseline PU correction (DB-PUC) framework addresses this challenge by correcting errors that occurred during the single-baseline PU procedure. It benefits from the additional information available through the differential interferogram and the stereo-radargrammetric phase, which are used to correct region-wise the ambiguity bands of the misestimated unwrapped phases to be less sensitive to noise and possible temporal changes. The multilevel of the DB-PUC approach makes it flexible, computationally efficient, and well adapted to deal with the various PU error scenarios. This framework is used operationally for the processing of the data of the TanDEM-X mission.
14 March 2025 in IEEE Geoscience and Remote Sensing Magazine
The main goal of the TerraSAR-X Add-On for Digital Elevation Measurements (TanDEM-X) mission is the generation of a global digital elevation model (DEM) of unprecedented accuracy and coverage. The global TanDEM-X DEM product became available in 2016, surpassed all expectations, and became a reference for a wide range of Earth science, commercial, and geospatial applications. In addition, new information products, such as DEM change maps (DCMs), have been developed and are available to the geoscience and remote sensing community. Beyond the operational products, new science applications have been demonstrated and are summarized in this article, along with experimental data acquisitions. This article also aims to provide an overview of science activities with TanDEM-X data and science data acquisitions planned for the coming years.
With the global TanDEM-X DEM generation being finished in 2016, the mission is now acquiring a new dataset to provide an independent DEM, the so-called "TanDEM-X Change DEM". It is based on a completely new dataset acquired from 2017 – 2019 in contrast to the acquisitions for the global DEM between 2010 and 2015 in the aim to characterise terrain changes. It benefits from improvements in the acquisition planning process and in the data processing which enable to achieve reliable DEM data of high accuracy with fewer acquisitions. For this goal, the use of an edited TanDEM-X DEM as "starting point" for the processing is mandatory. Detectable 3d elevation changes are presented exemplarily in Indonesian forest and on an outlet glacier in Antarctica.
29 October 2020 in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Since 2017, the TanDEM-X mission aims to acquire data globally to generate another (updated) DEM. This new set of acquisitions, which will be complete in 2020, has a clear temporal separation from those used for the TanDEM-X global DEM. It will therefore allow the creation of a temporally independent DEM, the so-called “TanDEM-X Change DEM” enabling the characterization of terrain changes. Since only one global coverage is being acquired, improvements in e.g. the interferometric data processing are necessary. In particular, an edited version of the existing global TanDEM-X DEM is now the "starting point" for the interferometric processing as detailed in this paper.