Signal decorrelation poses a limitation to multipass SAR interferometry. In pursuit of overcoming this limitation to achieve high-precision deformation estimates, different techniques have been developed, with short baseline subset, SqueeSAR, and CAESAR as the overarching schemes. These different analysis approaches raise the question of their efficiency and limitation in phase and consequently deformation estimation. This contribution first addresses this question and then proposes a new estimator with improved performance, called Eigendecomposition-based Maximum-likelihood-estimator of Interferometric phase (EMI). The proposed estimator combines the advantages of the state-of-the-art techniques. Identical to CAESAR, EMI is solved using eigendecomposition; it is therefore computationally efficient and straightforward in implementation. Similar to SqueeSAR, EMI is a maximum-likelihood-estimator; hence, it retains estimation efficiency. The computational and estimation efficiency of EMI renders it as an optimum choice for phase estimation. A further marriage of EMI with the proposed Sequential Estimator by Ansari et al. provides an efficient processing scheme tailored to the analysis of Big InSAR Data. EMI is formulated and verified in relation to the state-of-the-art approaches via mathematical formulation, simulation analysis, and experiments with time series of Sentinel-1 data over the volcanic island of Vulcano, Italy.

Automated, image based methods for the retrieval of vegetation biophysical and biochemical variables are often hampered by the lack of a priori knowledge about land cover and phenology, which makes the retrieval a highly underdetermined problem. This study addresses this problem by presenting a novel approach, called CRASh, for the concurrent retrieval of leaf area index, leaf chlorophyll content, leaf water content and leaf dry matter content from high resolution solar reflective earth observation data. CRASh, which is based on the inversion of the combined PROSPECT+SAILh radiative transfer model (RTM), explores the benefits of combining semi-empirical and physically based approaches. The approach exploits novel ways to address the underdetermined problem in the context of an automated retrieval from mono-temporal high resolution data. To regularize the inverse problem in the variable domain, RTM inversion is coupled with an automated land cover classification. Model inversion is based on a two step lookup table (LUT) approach: First, a range of possible solutions is selected from a previously calculated LUT based on the analogy between measured and simulated reflectance. The final solution is determined from this subset by minimizing the difference between the variables used to simulate the spectra contained in the reduced LUT and a first guess of the solution. This first guess of the variables is derived from predictive semi-empirical relationships between classical vegetation indices and the single variables. Additional spectral regularization is obtained by the use of hyperspectral data. Results show that estimates obtained with CRASh are significantly more accurate than those obtained with a tested conventional RTM inversion and semi-empirical approach. Accuracies obtained in this study are comparable to the results obtained by various authors for better constrained inversions that assume more a priori information. The completely automated and image-based nature of the approach facilitates its use in operational chains for upcoming high resolution airborne and spaceborne imaging spectrometers.

This paper presents a nonlocal interferometric synthetic aperture radar (InSAR) filter with the goal of generating digital elevation models (DEMs) of higher resolution and accuracy from bistatic TanDEM-X strip map interferograms than with the processing chain used in production. The currently employed boxcar multilooking filter naturally decreases the resolution and has inherent limitations on what level of noise reduction can be achieved. The proposed filter is specifically designed to account for the inherent diversity of natural terrain by setting several filtering parameters adaptively. In particular, it considers the local fringe frequency and scene heterogeneity, ensuring proper denoising of interferograms with considerable underlying topography as well as urban areas. A comparison using synthetic and TanDEM-X bistatic strip map data sets with existing InSAR filters shows the effectiveness of the proposed techniques, most of which could readily be integrated into existing nonlocal filters. The resulting DEMs outclass the ones produced with the existing global TanDEM-X DEM processing chain by effectively increasing the resolution from 12 to 6 m and lowering the noise level by roughly a factor of two.

The TanDEM-X mission is the first free flying bistatic SAR mission. It has the primary objective to generate within a short time frame a global digital elevation model (DEM) of 10-m absolute vertical accuracy and 2-m relative height accuracy. For that, the whole land mass has been mapped at least twice with different baselines. The success of the mission depends on the accuracy of the final DEM and therefore on the reliability of the phase unwrapping (PU) algorithm. Hence, a robust and versatile PU method, which is in accordance with the acquisition concept, is necessary. This paper presents a new method that combines bistatic high-resolution interferometric data in order to perform an accurate PU on a huge amount of data. The dual-baseline PU correction (DB-PUC) framework addresses this challenge by correcting errors that occurred during the single-baseline PU procedure. It benefits from the additional information available through the differential interferogram and the stereo-radargrammetric phase, which are used to correct region-wise the ambiguity bands of the misestimated unwrapped phases to be less sensitive to noise and possible temporal changes. The multilevel of the DB-PUC approach makes it flexible, computationally efficient, and well adapted to deal with the various PU error scenarios. This framework is used operationally for the processing of the data of the TanDEM-X mission.

Multibaseline interferometric synthetic aperture radar (InSAR) techniques are effective approaches for retrieving the 3-D information of urban areas. In order to obtain a plausible reconstruction, it is necessary to use more than 20 interferograms. Hence, these methods are commonly not appropriate for large-scale 3-D urban mapping using TanDEM-X data, where only a few acquisitions are available in average for each city. This article proposes a new SAR tomographic processing framework to work with those extremely small stacks, which integrates the nonlocal filtering into SAR tomography inversion. The applicability of the algorithm is demonstrated using a TanDEM-X multibaseline stack with five bistatic interferograms over the whole city of Munich, Germany. A systematic comparison of our result with TanDEM-X raw digital elevation models (DEMs) and airborne LiDAR data shows that the relative height accuracy of two-third buildings is within 2 m, which outperforms the TanDEM-X raw DEM. The promising performance of the proposed algorithm paved the first step toward high-quality large-scale 3-D urban mapping.