In this study, the combustion of olive byproducts was investigated using the TG-FTIR technique. Different types of olive biomass were considered: twigs, leaves, olive-mill waste from the two-phase decanting method, and wastewater from the three-phase system. The reaction regions, ignition, and burnout temperatures at different heating rates were determined using TG/DTG analysis and the thermogravimetry results. Comprehensive combustion, ignition, burnout, and flammability indexes were also calculated. The highest combustion index values were obtained for waste from the three-phase system, followed by the two-phase decanting method, then with leaves and small twigs. The order of the index values indicated that the sample from the three-phase process ignited more quickly and yielded faster. The changes in activation energy calculated using different model-free isoconversional methods—Friedman, Ozawa–Flynn–Wall, and Kissinger–Akahira–Sunose—fell within the range of 130–140 kJ/kmol. FTIR analyses presented differences in the exhaust gas composition for specific combustion temperature ranges.

In the paper, results of drying biofuels from sewage sludge using solar energy are presented. Drying rates of biofuels made from sewage sludge and coal slime (PBS), sewage sludge and meat and bone meal (PBM), and sewage sludge and sawdust (PBT) with 15-mm and 35-mm granule particle size were studied. Tests were performed in a solar greenhouse dryer equipped with a specially designed mixing system. Experiments were aimed at determining the drying time of biofuels under various weather conditions in the southwestern part of Poland. In summer, in order to determine the best conditions for drying, tests were performed using various parameters, i.e., layers of various thickness, such as 5, 10, and 20 cm, and various mixing intensity (no mixing, mixing 3 and 5 times/day). In spring and the fall, 10-cm thick layers combined with 5 times mixing of fuels per day were used. The performed tests demonstrated that it is beneficial to dry fuels in 10-cm thick layer. In spring and the fall, PBS and PBM biofuels laid out in layers with just such thickness showed moisture content reduced to less than 10% after 8 days, while the PBT biofuel reached the same level after 14 days. In summer, the same result may be obtained for all the biofuels after 4 days on average. The presented original method of solar drying of biofuels obtained from sewage sludge and other waste may be used in wastewater treatment plants which process sewage sludge into fuels without incurring any additional costs for supplying heat.

The article presents the technical and economic analysis of the production of fuels from municipal sewage sludge. The analysis involved the production of two types of fuel compositions: sewage sludge with sawdust (PBT fuel) and sewage sludge with meat and bone meal (PBM fuel). The technology of the production line of these sewage fuels was proposed and analysed. The main objective of the study is to find the optimal production capacity. The optimisation analysis was performed for the adopted technical and economic parameters under Polish conditions. The objective function was set as a maximum of the net present value index and the optimisation procedure was carried out for the fuel production line input capacity from 0.5 to 3 t h^-1, using the search step 0.5 t h^-1. On the basis of technical and economic assumptions, economic efficiency indexes of the investment were determined for the case of optimal line productivity. The results of the optimisation analysis show that under appropriate conditions, such as prices of components and prices of produced fuels, the production of fuels from sewage sludge can be profitable. In the case of PBT fuel, calculated economic indexes show the best profitability for the capacity of a plant over 1.5 t h^-1 output, while production of PBM fuel is beneficial for a plant with the maximum of searched capacities: 3.0 t h^-1. Sensitivity analyses carried out during the investigation show that influence of both technical and economic assessments on the location of maximum of objective function (net present value) is significant.