Nowadays, sustainable construction is a key factor for reaching net-zero emissions of carbon dioxide all over the world. This goal is impossible to achieve by merely reducing the energy consumption of end-users. A more holistic approach should be taken, adopting sustainable industrial practices that use environmentally friendly materials on a large scale. This paper presents the analysis of the hydrothermal properties of hemp thermal insulation plates. We carried out extensive measurements and the analysis of the thermal conductivity coefficient, drying-out dynamics, and water absorption. The study was performed with experimental insulation samples based on the fiber obtained from hemp stems, prepared using different adhesive powders. The dimensions of the analyzed samples were 300 × 300 mm. The proposed samples are not yet available in mass production. Hemp does not flower in the Baltic region and was traditionally used for soil regeneration. Thus, using this raw material increases the added value of agricultural residues. Three series of hemp fiber samples with different substances and pressing modes were evaluated in the study. Each set of samples consisted of four plates with varying thicknesses and two different densities: 200 kg/m³ and 300 kg/m³. All samples exhibited a significant increase in moisture absorption and a strong correlation with the increase in thermal conductivity. The average thermal conductivity of the test samples ranged from 0.0544 to 0.0594 W/mK. The impact of the adhesive powder on the thermal conductivity was found to be extremely small. However, the values obtained were much higher than those for traditional thermal insulation materials, allowing to utilize the local agriculture residues and providing material for the construction of eco-friendly buildings.

This paper deals with the problems associated with the design and operation of once–through or combined water cooling systems of nuclear power plants using sea water. Suggested refinement techniques of physical modeling of hydraulic processes at the pre–stage using multipurpose hydraulic stand. An example of such a construction of the stand and the experience of its use in the justification of the design decisions of waterworks of energy facilities

In the realm of sustainable construction, Life Cycle Assessment (LCA) plays a key role as a tool for quantifying the environmental impacts of building materials and products. The integration of LCA and Building Information Modeling (BIM) makes it possible to evaluate the environmental performance of buildings at the design stage. This integration can help to improve the LCA process for buildings thanks to the potential for automation and interoperability. The goal of this study is to establish a BIM-based LCA workflow using the Industry Foundation Classes (IFC) open file format. The interoperability of BIM data exchange is achieved by applying IFC. The steps of the assessment process are described in accordance with the LCA phases outlined in the ISO 14040 standard. The impact assessment and results interpretation phases are automated by means of a program code for IFC file processing. The proposed BIM-based LCA is validated for a case study of a BIM model constructed for a three-story educational building. The GWP of the building materials and products of envelope and load-bearing structures at the A1–A3 life cycle stages are calculated for the purpose of proposed workflow testing. The resulting workflow allows for the calculation of negative environmental impacts to be agile, depending on the goal and scope set.