An innovative procedure for the selective recovery of lanthanides using (NH4)2SO4 from hydrous oxide cake produced after the alkali breakdown of monazite mineral concentrate was proposed. By applying this procedure, 94.6% of the rare earth elements (REEs) content would be dissolved. In this context, partial precipitation of light rare earth elements (LREEs) as their double sulfate took place. To separate uranium completely from thorium and the remaining REEs (5.4%) from hydrous oxide cake, an alkaline leaching procedure has been carried out by using a mixture of 1/3 (Na2CO3/NaHCO3) solution. Finally, the remaining hydrous oxide cake was then dissolved in 4M HCl to separate either Th or REEs contents.
The development of new materials based on biopolymers (as renewable resources) is substantial for environmental challenges in the heavy metal and radionuclide ions removal contaminations. Functionalization of chitosan with sulfonic groups was achieved for improving the uranium sorption, not only from slightly acidic leachate, but also for the underground water. The prepared hydrogel based on chitosan was characterized by series of analysis tools for structure elucidation as FTIR spectroscopy, textural properties using nitrogen adsorption method, pHPZC (by pH-drift method), thermogravimetric analysis (TGA), SEM, and SEM-EDX analyses. The sorption was performed toward uranium (VI) ions for adjustment of sorption performances. The optimum sorption was performed at pH 4 (prior to the precipitation pH). The total sorption was achieved within 25 min (relatively fast kinetics) and was fitted by pseudo-first order rate equation (PFORE) and resistance to intraparticle diffusion equation (RIDE). The maximum sorption capacity was around 1.5 mmol U g−1. The sorption isotherms were fitted by Langmuir and Sips equations. Desorption was achieved using 0.3 M HCl solution and the complete desorption was performed in around 15 min of contact. The sorption desorption cycles are relatively stable during 5 cycles with limit decreasing in sorption and desorption properties (around 3 ± 0.2% and 99.8 ± 0.1%, respectively). The sorbent was used for removal of U from acid leachate solution in mining area. The sorbent showed a highly performance for U(VI) removal, which was considered as a tool material for radionuclides removing from aquatic medium.
24 April 2019 in Euro-Mediterranean Journal for Environmental Integration
The primary goal of this work is to develop a technology that allows for the recovery of metal values from waste products, thereby promoting the wise and efficient use of our nation's resources. To achieve this goal, an industrial waste of El Kriymat boiler fly Ash was used for recovering its content of vanadium, nickel and zinc. About 97, 95 and 99% respectively of these economic elements were first dissolved from boiler fly ash magnetic concentrate (after physical concentration). Leaching experiments using optimum conditions include: 180 g/L sulfuric acid concentration and 4% solid/solid proportion manganese dioxide acts as an oxidant at 80 °C. The recovery of vanadium (V) metal ions was carried out using 3% Alamine 336 in kerosene at an equilibrium pH value of 0.9. Subsequently, 15% sodium sulfide solution was used for co-precipitation of nickel and zinc metal ions in the raffinate solution at pH value of 3.5. Graphical Abstract
1 October 2019 in Journal of Environmental Chemical Engineering