Suresh Sharma

Dr. Suresh Sharma

Department of Civil and Environmental Engineering, Youngstown State University, Youngstown, OH 44555, USA
orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 October 2020 in Ish Journal of Hydraulic Engineering
Verified
Journal Article
Closed access
EGEkaraj Ghimire
Ekaraj Ghimire
Suresh SharmaSuresh Sharma
Suresh Sharma
NLNiraj Lamichhane
Niraj Lamichhane
The objective of this research is to evaluate the predictive capability of one-dimensional (1D), two-dimensional (2D), HEC-RAS models, for the computation of the travel time of a flood event and its flooding extent. The research was performed in the Grand River of Ohio, USA utilizing the same sets of geometric conditions such as LiDAR data integrated with field-surveyed cross-sections and the same set of flow conditions within the 1D, 2D, and coupled 1D/2D modeling features of HEC-RAS. The analysis suggested that the 2D model consistently outperformed 1D and coupled 1D/2D models. Furthermore, sensitivity analysis indicated that coupled 1D/2D and 1D models are relatively more sensitive than the 2D model to the inputs. The 1D model prediction for travel time was 20% more than the 2D model. Similarly, the inundation area from the 1D model was found to be slightly greater (4.1%) than that of the 2D model.

26 April 2018 in Hydrological Sciences Journal
Verified
Journal Article
Closed access
NLNiraj Lamichhane
Niraj Lamichhane
Suresh SharmaSuresh Sharma
Suresh Sharma
The main objective of this study was to quantify the error associated with input data, including various resolutions of elevation datasets and Manning’s roughness for travel time computation and floodplain mapping. This was accomplished on the test bed, the Grand River (Ohio, USA) using the HEC-RAS model. LiDAR data integrated with survey data provided conservative predictions, whereas coarser elevation datasets provided a positive difference in the travel time (11.03–15.01%) and inundation area (32.56–44.52%). The minimum differences in travel time and inundation area were 0.50–4.33% and 3.55–7.16%, respectively, when the result from LiDAR integrated with survey data was compared with a 10-m DEM integrated with survey data. The results suggest that a 10-m DEM in the channel and LiDAR data in the floodplain combined with survey data would be appropriate for a flood warning system. Additionally, Manning’s roughness of the channel section was found to be more sensitive than that of the floodplain. The decrease in inundation area was highest (8.97%) for the lower value of Manning’s roughness.

14 April 2017 in Hydrology
Verified
Journal Article
Open access
PDF file
NLNiraj Lamichhane
Niraj Lamichhane
Suresh SharmaSuresh Sharma
Suresh Sharma
Flooding is one of the most frequent natural disasters across the world, which damages properties and may take the lives of people. Flood warning systems can play a significant role in minimizing those effects by helping to evacuate people from the probable affected areas during peak flash flood times. Therefore, a conceptual approach of an automated flood warning system is presented in this research to protect several houses, roads, and infrastructures along the Grand River, which are vulnerable to flooding during a 500 year return period flash flood. The Grand River is a tributary of Lake Erie, which lies in the Grand River watershed in the northeastern region of the United States and has a humid continental climate and receives lake-effect precipitation. The flood warning system for the Grand River was developed specifically during high flow conditions by calculating flood travel time and generating the inundation mapping for 12 different selected flood stages, which were approximately 2 to 500 years in recurrence interval, ranging from 10 ft. to 21 ft. at gage station 04212100, near the City of Painesville, OH. A Hydraulic Engineering Center-River Analysis System (HEC-RAS) was utilized for hydraulic modeling. Geospatial data required for HEC-RAS was obtained using a Digital Elevation Model (DEM) derived from Light Detection and Ranging (LiDAR) datasets, which were pre-processed and post-processed in HEC-GeoRAS to produce flood inundation maps. The flood travel time and flood inundation maps were generated by integrating LiDAR data with field verified survey results in order to provide the evacuation lead time needed for the people of probable affected areas, which is different from earlier studies. The generated inundation maps estimate the aerial extent of flooding along the Grand River corresponding to the various flood stages at the gage station near the City of Painesville and Harpersfield. The inundation maps were overlaid on digital orthographic maps to visualize its aerial extents, which can be uploaded online to provide a real-time inundation warning to the public when the flood occurs in the river.

1 January 2019 in International Journal of Agricultural and Biological Engineering
Verified
Journal Article
Open access
PDF file
SSSabin Shrestha
Sabin Shrestha
Suresh SharmaSuresh Sharma
Suresh Sharma
Rishabh GuptaRishabh Gupta
Rishabh Gupta
Rabin BhattaraiRabin Bhattarai
Rabin Bhattarai
Impact of global climate change on stream low flows: A case study of the great Miami river watershed, Ohio, USA

23 November 2023 in Water
Verified
Journal Article
Open access
PDF file
SMSamir Mainali
Samir Mainali
Suresh SharmaSuresh Sharma
Suresh Sharma
This study delved into the analysis of hourly observed as well as future precipitation data in the towns of Willoughby and Buffalo on the Lake Erie Coast to examine the variations in IDF relationships over the 21st century. Several regional climate models (RCMs) and general circulation models (GCMs) from the Coupled Model Intercomparison Project (CMIP) Phases 5 and 6 were used. The study evaluated three RCMs with historical and Representative Concentration Pathway (RCP) 8.5 scenarios for each CMIP5 and three GCMs with historical and Shared Socioeconomic Pathways (SSPs) (126, 245, 370, and 585) scenarios for each CMIP6. The results suggested that the town of Willoughby would experience an increase of 9–46%, whereas Buffalo would experience an upsurge of 6–140% in the hourly precipitation intensity under the worst-case scenarios of RCP8.5 for CMIP5 and SSP585 for CMIP6. This increase is expected to occur in both the near (2020–2059) and far future (2060–2099), with a return period as low as 2 years and as high as 100 years when compared to the baseline period (1980–2019). The analysis indicated an increased range of 9–39% in the near future and 20–55% in the far future for Willoughby, while the Buffalo region may experience an increase of 2–95% in the near future and 3–192% in the far future as compared to the baseline period. In contrast to CMIP6 SSP585 models, CMIP5 RCP8.5 models predicted rainfall with an intensity value that is up to 28% higher in the town of Willoughby, while the reverse was true for the Buffalo region. The findings of this study are expected to be helpful for the design of water resource infrastructures.

23 August 2023 in Water
Verified
Journal Article
Open access
PDF file
Suresh SharmaSuresh Sharma
Suresh Sharma
SBShuvra Bijukshe
Shuvra Bijukshe
SPSai Sree Puppala
Sai Sree Puppala
This study was conducted in the Atwood and Tappan Lakes watersheds of the Tuscarawas basin of Ohio. The flow, total nitrogen (TN), and total phosphorus (TP) loadings were monitored with the help of local stakeholders for a few years at various locations of the watershed to develop the Soil and Water Assessment Tool (SWAT). The multi-site SWAT model calibration and validation were accomplished with a reasonable model performance. In the next step, the scenario analysis was conducted in the SWAT model using various BMPs, including vegetative filter strips, grass waterways, fertilizer reduction, crop rotation, and cover crops to evaluate their performance in reducing TN and TP from the watershed. While BMPS in many studies are decided based on researchers’ intuition, these BMPs were selected based on active consultation with the local stakeholders, who were engaged in the reduction of TN and TP loadings from the watersheds. Since the SWAT model calibration for TN and TP was not as good as the hydrologic model calibration, various scenarios of TN and TP reduction using BMPs were investigated for several years using both calibrated and uncalibrated SWAT models. We examined all the BMPs in 12 sub-watersheds of the Atwood and 10 sub-watersheds of the Tappan Lake watershed. The analysis indicated that the management practices of cover crops (rye) in combination with grass waterways with a 10% fertilizer reduction could minimize the TN and TP loading by as much as 88%, without significantly compromising the agricultural yield. However, a 10% fertilizer reduction without any BMPs could reduce TN and TP by just 9%. The cover crop (rye) including 10% fertilizer reduction with grass waterways seemed to be the most effective in reducing TN and TP, whereas the implementation of a filter strip led to a 70% reduction and was the next effective BMPs in reducing TN and TP loadings. In general, TN losses were reduced by 8% to 53%, while TP losses were reduced by 7% to 88%, depending on the BMPs used. By and large, the TN and TP reduction achieved through the calibrated model was not significantly different from the uncalibrated model, even though the reduction using the calibrated model was slightly higher for all scenarios than that of the uncalibrated model. The TN and TP loadings were highly sensitive to cattle grazing. When just 50% of the cattle were permitted to graze, the model predicted that there would be a 40% increase in total nitrogen and a 70% increase in total phosphorus in both watersheds. Our investigation revealed that monitoring the watershed at a small sub-watershed scale and calibrating the SWAT model for nitrogen and phosphorus is delicate.