Sumathi Arunachalam

Dr. Sumathi Arunachalam


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 December 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
SASumathi Arunachalam
Sumathi Arunachalam
Murali GunasekaranMurali Gunasekaran
Murali Gunasekaran
GDGowdhaman D
Gowdhaman D
mugahed amranmugahed amran
mugahed amran
Roman FediukRoman Fediuk
Roman Fediuk
TGThillai Seenu Gowsika
Thillai Seenu Gowsika
Concrete cracking is inevitable, coupled with increased permeability, exacerbating the adverse impacts of atmospheric conditions and chemical attacks. Calcium carbonate precipitation resulting from certain microorganisms’ metabolism is a novel approach that can self-heal the cracks and improve concrete properties. In this study, the development and effect of bacteria Bacillus cohnii on crack healing, regained compressive strength after pre-cracking, sorptivity, water absorption, and concrete microstructures were investigated. For this purpose, a Bacillus cohnii bacterial concentration of 105 cells/mL was used as a water replacement in the concrete mixtures. Two methods subsequently cured the prepared concrete specimens: wet–dry (W-D) cycle and full-wet (F-W). In the wet–dry cycle, the cast specimens were immersed in water for 24 h and then kept at room temperature for 24 h, which was considered as one cycle; this process was repeated for 28 days. In the full-wet curing, specimens were immersed in water for 28 days. However, the curing water was changed every 24 h to facilitate the essential oxygen supply for bacterial activity to precipitate calcium carbonate. The results revealed that 90% and 88% surface healing was noticed in full-wet and full-dry pre-cracked specimens at 28 days.

11 December 2020 in Materials
Verified
Journal Article
Open access
PDF file
Murali GunasekaranMurali Gunasekaran
Murali Gunasekaran
mugahed amranmugahed amran
mugahed amran
Roman FediukRoman Fediuk
Roman Fediuk
Nikolai Ivanovich VatinNikolai Ivanovich Vatin
Nikolai Ivanovich Vatin
Sudharshan N. RamanSudharshan N. Raman
Sudharshan N. Raman
SASumathi Arunachalam
Sumathi Arunachalam
Ferrocement panels, while offering various benefits, do not cover instances of low and moderated velocity impact. To address this problem and to enhance the impact strength against low-velocity impact, a fibrous ferrocement panel is proposed and investigated. This study aims to assess the flexural and low-velocity impact response of simply supported ferrocement panels reinforced with expanded wire mesh (EWM) and steel fibers. The experimental program covered 12 different ferrocement panel prototypes and was tested against a three-point flexural load and falling mass impact test. The ferrocement panel system comprises mortar reinforced with 1% and 2% dosage of steel fibers and an EWM arranged in 1, 2, and 3 layers. For mortar preparation, a water-cement (w/c) ratio of 0.4 was maintained and all panels were cured in water for 28 days. The primary endpoints of the investigation are first crack and ultimate load capacity, deflection corresponding to first crack and ultimate load, ductility index, flexural strength, crack width at ultimate load, a number of impacts needed to induce crack commencement and failure, ductility ratio, and failure mode. The finding revealed that the three-layers of EWM inclusion and steel fibers resulted in an additional impact resistance improvement at cracking and failure stages of ferrocement panels. With superior ultimate load capacity, flexural strength, crack resistance, impact resistance, and ductile response, as witnessed in the experiment program, ferrocement panel can be a positive choice for many construction applications subjected to repeated low-velocity impacts.

15 December 2023 in Structures
Verified
Journal Article
Closed access
ARA. Rajesh
A. Rajesh
SASumathi Arunachalam
Sumathi Arunachalam

30 August 2018 in Iranian Journal of Science and Technology, Transactions of Civil Engineering
Verified
Journal Article
Closed access
PDF file
SASumathi Arunachalam
Sumathi Arunachalam
KMK Saravana Raja Mohan
K Saravana Raja Mohan

30 August 2023 in Biomass Conversion and Biorefinery
Verified
Journal Article
Closed access
PDF file
RARajesh Anbazhagan
Rajesh Anbazhagan
SASumathi Arunachalam
Sumathi Arunachalam

18 September 2023 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
PDF file
ARA. Rajesh
A. Rajesh
SASumathi Arunachalam
Sumathi Arunachalam
DGD. Gowdhaman
D. Gowdhaman
Cracks in concrete are predestined, and they lay a pathway for water and aggressive chemical substances, which leads to deterioration of concrete ingredients and affects the service life of concrete structures. In the recent years, natural fibers and bacteria species are used to improve rheological properties and to heal concrete cracks. Precipitation of calcium carbonate crystals produced by bacteria in concrete cracks is highly acceptable to increase the mechanical and durability properties. In this research, Bacillus paramycoides species is isolated from concrete efflorescence and is used for self-healing. For bacteria immobilization, natural fibers like coir, flax, and jute are used as suitable carriers. Furthermore, the study on the performance of bacteria in crack healing and strengthening properties is in need for different curing/exposure conditions such as full-wet, wet–dry, saturated normal soil, and saturated marine soil. The performance of bacteria in concrete is estimated by a series of tests such as compressive strength, compressive strength regains, tensile strength, impact strength, sorptivity, and deterioration of concrete under acid curing. Based on the test results, the selected bacteria have the ability to heal crack widths of 0.3–1.1 mm with the average healing rate of 83 %, 92 %, 76 %, and 42.5 % for full-wet, wet–dry, normal soil, and marine soil exposure, respectively. Microstructure studies were investigated for fiber-reinforced concrete and bacteria-immobilized fiber-reinforced concrete to determine the composition of elements formed in calcium carbonate precipitates. In this work, the results suggest that natural fibers can be used as sustainable carrier material for crack healing, strength, and durability improvement in concrete.