: High spatial resolution hyperspectral data often used in precision farming applications are not available from current satellite sensors, and difficult or expensive to acquire from standard aircraft. Alternatively, in precision farming, unmanned aerial vehicles (UAVs) are emerging as lower cost and more flexible means to acquire very high resolution imagery. Miniaturized hyperspectral sensors have been developed for UAVs, but the sensors, associated hardware, and data processing software are still cost prohibitive for use by individual farmers or small remote sensing firms. This study simulated hyperspectral image data by fusing multispectral camera imagery and spectrometer data. We mounted a multispectral camera and spectrometer, both being low cost and low weight, on a standard UAV and developed procedures for their precise data alignment, followed by fusion of the spectrometer data with the image data to produce estimated spectra for all the multispectral camera image pixels. To align the data collected from the two sensors in both the time and space domains, a post-acquisition correlation-based global optimization method was used. Data fusion, to estimate hyperspectral reflectance, was implemented using several methods for comparison. Flight data from two crop sites, one being tomatoes, and the other corn and soybeans, were used to evaluate the alignment procedure and the data fusion results. The data alignment procedure resulted in a peak R2 between the spectrometer and camera data of 0.95 and 0.72, respectively, for the two test sites. The corresponding multispectral camera data for these space and time offsets were taken as the best match to a given spectrometer reading, and used in modelling to estimate hyperspectral imagery from the multispectral camera pixel data. Of the fusion approaches evaluated, principal component analysis (PCA) based models and Bayesian imputation reached a similar accuracy, and outperformed simple spline interpolation. Mean absolute error (MAE) between predicted and observed spectra was 17% relative to the mean of the observed spectra, and root mean squared error (RMSE) was 0.028. This approach to deriving estimated hyperspectral image data can be applied in a simple fashion at very low cost for crop assessment and monitoring within individual fields.
This study proposed a natural-rule-based-connection (NRBC) method to connect river segments after water body detection from remotely sensed imagery. A complete river network is important for many hydrological applications. While water body detection methods using remote sensing are well-developed, less attention has been paid to connect discontinuous river segments and form a complete river network. This study designed an automated NRBC method to extract a complete river network by connecting river segments at polygon level. With the assistance of an image pyramid, neighbouring river segments are connected based on four criteria: gap width (Tg), river direction consistency (Tθ), river width consistency (Tw), and minimum river segment length (Tl). The sensitivity of these four criteria were tested, analyzed, and proper criteria values were suggested using image scenes from two diverse river cases. The comparison of NRBC and the alternative morphological method demonstrated NRBC’s advantage of natural rule based selective connection. We refined a river centerline extraction method and show how it outperformed three other existing centerline extraction methods on the test sites. The extracted river polygons and centerlines have a multitude of end uses including rapidly mapping flood extents, monitoring surface water supply, and the provision of validation data for simulation models required for water quantity, quality and aquatic biota assessments. The code for the NRBC is available on GitHub.