The simultaneous rational optimization of structure and composition is extremely important for improving the catalytic performance of yolk–shell nanoreactors, but has been rarely achieved so far. In this work, yolk–shell Co3O4/C@SiO2 nanoreactors (YSCCSs) are facilely synthesized by coordinating the growth of Co-zeolitic imidazole framework (ZIF-67) crystals with the hydrolysis/condensation of tetraethoxysilane (TEOS). In this process, the preliminarily formed ZIF-67 crystals play an essential role in the final structure of YSCCSs, which can be used as the template for silicon hydroxide growth and the precursors for carbon and cobalt species. To present the advantages of YSCCSs as a catalyst, sulfate-radical-based advanced oxidation processes (SR-AOPs) for bisphenol A (BPA) degradation were chosen as the model reaction. For comparison, three other catalysts, including yolk–shell Co3O4@SiO2 nanoreactors (YSCSs), and Co3O4 and ZIF-67 derived Co3O4/C nanoparticles, were also tested. The results show that YSCCSs exhibit significant BPA degradation performance over YSCSs, and CO3O4 and Co3O4/C nanoparticles. This outstanding catalytic performance is ascribed to the rational optimization of the catalyst from the following two aspects: (i) confinement effect of yolk–shell nanostructure and the improved dispersity of carbon supported Co3O4 species enhance the catalytic activity and stability (structure optimization); and (ii) the existence of graphitized carbon accelerates the electron transport from the catalyst to peroxymonosulfate (PMS) and thus increases the reaction kinetics (composition optimization). The results of this research show that metal–organic framework (MOF)-derived nanoreactors with a rational structure and composition have a promising application prospect for environmental remediation.
Convenient synthesis of ultrafine-Co 3 O 4 incorporated carbon composite and its efficient continuous-flow reaction for environmental remediation were achieved.
1 September 2018 in Journal of Hazardous Materials
Efficient extraction of pollutants with different chemical properties from environmental samples has attracted great attention in the development of analytical chemistry. However, it is still a challenge to develop an appropriate and sensitive adsorbent for determining broad-spectrum analytes. Herein, zeolitic imidazole framework-8 (ZIF-8)-derived double-shelled hollow zinc oxide/carbon (ZnO/C) nanocubes were reported as a novel coating for solid-phase microextraction (SPME). The nanocubes with a unique structure and composition were obtained by controlled etching of ZIF-8 with tannic acid (TA) followed by pyrolysis. When a ZnO/C nanocube-coated fiber (ZnO/C–F) was used to extract the complex environmental samples containing both nonpolar (benzene compounds (BTEX)) and polar (chlorophenols (CPs)) pollutants, excellent extraction performance was achieved; we obtained low detection limits (0.14–0.56 ng L−1 for BTEX and 1.10–2.84 ng L−1 for CPs), good repeatability (2.2–5.9% for six replicated extractions) and excellent reproducibility (0.61–7.8%, fiber to fiber). The broad-spectrum SPME performance was ascribed to the synergistic effect between the composition and structure of ZnO/C nanocubes. Compositionally, the uniform dispersion of ZnO and carbon framework could provide abundant adsorption active sites, where Zn-OHs bound CPs by hydrogen bonding and carbon absorbed BTEX through π–π stacking interaction and hydrophobic interaction. Structurally, the double-shelled hollow morphology of the nanocubes was favorable for the sensitive extraction. Finally, the established ZnO/C–F-based headspace-SPME method was used for the preconcentration and determination of abundant analytes from real water samples. These findings open the door for the practical use of double-shelled hollow multicompositional inorganic materials.
Research on the coupling of membrane separation (MS) and electrochemical advanced oxidation processes (EAOPs) has been a hot area in water pollution control for decades. This coupling aims to greatly improve water quality and focuses on the challenges in practical application to provide a promising solution to water shortage problems. This article provides a summary of the coupling configurations of MS and EAOPs, including two-stage and one-pot processes. The two-stage process is a combination of MS and EAOPs where one process acts as a pretreatment for the other. Membrane fouling is reduced when setting EAOPs before MS, while mass transfer is promoted when placing EAOPs after MS. A one-pot process is a kind of integration of two technologies. The anode or cathode of the EAOPs is fabricated from porous materials to function as a membrane electrode; thus, pollutants are concurrently separated and degraded. The advantages of enhanced mass transfer and the enlarged electroactive area suggest that this process has excellent performance at a low current input, leading to much lower energy consumption. The reported conclusions illustrate that the coupling of MS and EAOPs is highly applicable and may be widely employed in wastewater treatment in the future.