Today, the large amount of information ex-changed among various devices as well as the growth of the Internet of Things (IoT) demand the development of devices that ensure secure communications, preventing malicious agents from tapping sensitive data. Indeed, information security is one of the key challenges to address within the IoT field. Due to the strong resource constraints in some IoT applications, cryptographic algorithms affording lightweight implementations have been proposed. They constitute the so-called lightweight cryptography. A prominent example is the Trivium stream cipher, one of the finalists of the eSTREAM project. Although cryptographic algorithms are certainly simpler, one of their most critical vulnerability sources in terms of hardware implementations is side channel attacks. In this paper, it is studied the vulnerability of field-programmable gate array (FPGA) implementations of Trivium stream ciphers against fault attacks. The design and implementation of a system that alters the clock signal and checks the outcome is also described. A comparison between real and simulated fault injections is carried out in order to examine their veracity. The vulnerability of different versions of the Trivium cipher and their routing dependences has been tested in two different FPGA families. The results show that all versions of the Trivium cipher are vulnerable to fault attacks, although some versions are more vulnerable than others.

Differential Fault Analysis (DFA) and Power Analysis (PA) attacks, have become the main methods for exploiting the vulnerabilities of physical implementations of block ciphers, currently used in a multitude of applications, such as the Advanced Encryption Standard (AES). In order to minimize these types of vulnerabilities, several mechanisms have been proposed to detect fault attacks. However, these mechanisms can have a significant cost, not fully covering the implementations against fault attacks or not taking into account the leakage of the information exploitable by the power analysis attacks. In this paper, four different approaches are proposed with the aim of protecting the AES block cipher against DFA. The proposed solutions are based on Hamming code and parity bits as signature generators for the internal state of the AES cipher. These allow to detect DFA exploitable faults, from bit to byte level. The proposed solutions have been applied to a T-box based AES block cipher implemented on Field Programmable Gate Array (FPGA). Experimental results suggest a fault coverage of 98.5% and 99.99% with an area penalty of 9% and 36% respectively, for the parity bit signature generators and a fault coverage of 100% with an area penalty of 18% and 42% respectively when Hamming code signature generator is used. In addition, none of the proposed countermeasures impose a frequency degradation, in respect to the unprotected cipher. The proposed work goes further in the evaluation of the proposed DFA countermeasures by evaluating the impact of these structures in terms of power side-channel. The obtained results suggest that no extra information leakage is produced that can be exploited by PA. Overall, the proposed DFA countermeasures provide a high fault coverage protection with a low cost in terms of area and power consumption and no PA security degradation.

The development of differential fault analysis (DFA) techniques and mechanisms to inject faults into cryptographic circuits brings with it the need to use protection mechanisms that guarantee the expected level of security. The AES cipher, as a standard, has been the target of numerous DFA techniques, where its security has been compromised through different formulations and types of fault injections. These attacks have shown vulnerabilities of different AES implementations and building blocks. Consequently, several solutions have been proposed that provide additional protection to cover the identified vulnerabilities. In this paper, an extensive analysis has been carried out covering the existing fault injection techniques, the types of faults, and the requirements needed to apply DFA. Additionally, an analysis of the countermeasures reported in the literature is also presented, considering the protection provided, the type of faults considered, and the coverage against fault attacks. The eight different types of fault that allow us to perform DFAs on the AES cipher have been differentiated, as well as the vulnerabilities of the cipher. On the other hand, two comparisons have been made considering frequency penalty vs. area and fault coverage vs. area and frequency overhead. A metric has been proposed to compare the fault coverage of all the proposed solutions. To conclude, a final analysis is presented discussing the key aspects when choosing a particular solution and the possible development of new countermeasures to provide further protection against DFA.

One of the best methods to improve the security of cryptographic systems used to exchange sensitive information is to attack them to find their vulnerabilities and to strengthen them in subsequent designs. Trivium stream cipher is one of the lightweight ciphers designed for security applications in the Internet of things (IoT). In this paper, we present a complete setup to attack ASIC implementations of Trivium which allows recovering the secret keys using the active non-invasive technique attack of clock manipulation, combined with Differential Fault Analysis (DFA) cryptanalysis. The attack system is able to inject effective transient faults into the Trivium in a clock cycle and sample the faulty output. Then, the internal state of the Trivium is recovered using the DFA cryptanalysis through the comparison between the correct and the faulty outputs. Finally, a backward version of Trivium was also designed to go back and get the secret keys from the initial internal states. The key recovery has been verified with numerous simulations data attacks and used with the experimental data obtained from the Application Specific Integrated Circuit (ASIC) Trivium. The secret key of the Trivium were recovered experimentally in 100% of the attempts, considering a real scenario and minimum assumptions.

This article presents the development of an experimental system to introduce faults in Trivium stream ciphers implemented on FPGA. The developed system has made possible to analyze the vulnerability of these implementations against fault attacks. The developed system consists of a mechanism that injects small pulses in the clock signal, and elements that analyze if a fault has been introduced, the number of faults introduced and its position in the inner state. The results obtained demonstrate the vulnerability of these implementations against fault attacks. As far as we know, this is the first time that experimental results of fault attack over Trivium are presented.

The majority of data exchanged between connected devices are confidential and must be protected against unauthorized access. To ensure data protection, so-called cryptographic algorithms are used. These algorithms have proven to be mathematically secure against brute force due to the key length, but their physical implementations are vulnerable against physical attacks. The physical implementation of these algorithms can result in the disclosure of information that can be used to access confidential data. Some of the most powerful hardware attacks presented in the literature are called fault injection attacks. These attacks involve introducing a malfunction into the normal operation of the device and then analyzing the data obtained by comparing them with the expected behavior. Some of the most common methods for injecting faults are the variation of the supply voltage and temperature or the injection of electromagnetic pulses. In this paper, a hardware design methodology using analog-to-digital converters (ADCs) is presented to detect attacks on cryptocircuits and prevent information leakage during fault injection attacks. To assess the effectiveness of the proposed design approach, FPGA-based ADC modules were designed that detect changes in temperature and supply voltage. Two setups were implemented to test the scheme against voltage and temperature variations and injections of electromagnetic pulses. The results obtained demonstrate that, in 100% of the cases, when the correct operating voltage and temperature range were established, the detectors could activate an alarm signal when the cryptographic module was attacked, thus avoiding confidential information leakage and protecting data from being exploited.