We demonstrate mode-division multiplexed WDM transmission over 50-km of few-mode fiber using the fiber’s LP01 and two degenerate LP11 modes. A few-mode EDFA is used to boost the power of the output signal before a few-mode coherent receiver. A 6×6 time-domain MIMO equalizer is used to recover the transmitted data. We also experimentally characterize the 50-km few-mode fiber and the few-mode EDFA.
We experimentally demonstrate the first few-mode space division multiplexed (SDM) transmission of real-time 10Gb/s Ethernet (10GbE) traffic using commercial small form-factor pluggable SFP + transceivers without coherent detection or multiple input multiple output digital signal processing (MIMO-DSP) over 0.5km elliptical-core few-mode-fiber, achieving <-26dB crosstalk between LP11e and LP11o modes at 1.3μm.
We present the analytical design of an imaging spectrometer based on the three-concentric-mirror (Offner) configuration. The approach presented allows for the rapid design of this class of system. Likewise, high-optical-quality spectrometers are obtained without the use of aberration-corrected gratings, even for high speeds. Our approach is based on the calculation of both the meridional and the sagittal images of an off-axis object point. Thus, the meridional and sagittal curves are obtained in the whole spectral range. Making these curves tangent to each other for a given wavelength results in a significant decrease in astigmatism, which is the dominant residual aberration. RMS spot radii less than 5 µm are obtained for speeds as high as f/2.5 and a wavelength range of 0.4–1.0 µm. A design example is presented using a free interactive optical design tool.
This is a proposal and description of a new configuration for an Offner imaging spectrometer based on the theory of aberrations of off-plane classical-ruled spherical diffraction gratings. This new spectrometer comprises a concave mirror used in double reflection and a convex reflection grating operating in quadrature, in a concentric layout. A very simple procedure obtains designs that are anastigmatic for a given point on the entrance slit and a given wavelength. Specific examples show that the performance of this type of system improves the performance of analogous conventional in-plane systems, when compactness and/or high spectral resolution is of fundamental importance.
We aim to show that Dyson imaging spectrometers can be easily designed by applying the concept of the Rowland circle to refracting surfaces. This allows us to conceive an analytical procedure that is based on the removal of astigmatism at two wavelengths. Following this procedure, high-optical-quality spectrometers can be designed even for high speeds. Root-mean-square spot radii less than are obtained for speeds as high as , slit lengths of , and wavelength ranges of . Design examples are presented for classical Dyson spectrometers in which the detector is glued to the glass plane surface and for spectrometers with an air gap between this surface and the image plane.
We present a theoretical study about spatial mode multiplexing/demultiplexing (mux/demux) without theoretical losses by means of interferometry with selective control of the Gouy phase of optical beams, that is, Gouy phase interferometry (GPI). Different Gouy phase values can be obtained by inserting appropriate optical systems at each arm of an interferometer. Thus, spatial mode mux/demux operations of strategic interest in optical communications with few-mode optical fibers are implemented by means of constructive interference and regardless of the parity and separability of the optical beams. Consequently, unachievable mux/demux by interferometry based on image inversion methods becomes possible with GPI. This kind of operation can also be interesting for optical sensors, optical metrology, image processing, and so on.