We demonstrate mode-division multiplexed WDM transmission over 50-km of few-mode fiber using the fiber’s LP₀₁ and two degenerate LP₁₁ modes. A few-mode EDFA is used to boost the power of the output signal before a few-mode coherent receiver. A 6×6 time-domain MIMO equalizer is used to recover the transmitted data. We also experimentally characterize the 50-km few-mode fiber and the few-mode EDFA.

To the best of our knowledge, we present the first field trial of distributed optical fiber sensing (DOFS) and high-speed communication, comprising a co-existing system, over an operational telecom network. Using probabilistic-shaped (PS) DP-144QAM, a 36.8 Tb/s with an 8.28-b/s/Hz spectral efficiency (SE) (48-Gbaud channels, 50-GHz channel spacing) was achieved. Employing DOFS technology, road traffic, i.e., vehicle speed and vehicle density, were sensed with 98.5% and 94.5% accuracies, respectively, as compared to video analytics. Additionally, road conditions, i.e., roughness level was sensed with >85% accuracy via a machine learning based classifier.

We experimentally demonstrate the first few-mode space division multiplexed (SDM) transmission of real-time 10Gb/s Ethernet (10GbE) traffic using commercial small form-factor pluggable SFP + transceivers without coherent detection or multiple input multiple output digital signal processing (MIMO-DSP) over 0.5km elliptical-core few-mode-fiber, achieving <-26dB crosstalk between LP_11e and LP_11o modes at 1.3μm.

We demonstrate vibration detection and localization scheme based on bidirectional transmission of telecom signals with digital coherent detection at the receivers. Optical phase is extracted from the digital signal processing blocks of the coherent receiver, from which the vibration component is extracted by bandpass filtering, and the position along the cable closest to the vibrations epicenter is recovered by correlation. We demonstrate our scheme first using offline experiment with 200-Gb/s DP-16QAM, and we report field trial results over installed fiber to detect real-world vibration events.

The concepts of spatial-division multiplexing (SDM) technology were first proposed in the telecommunications industry as an indispensable solution to reduce the cost-per-bit of optical fiber transmission. Recently, such spatial channels and modes have been applied in optical sensing applications where the returned echo is analyzed for the collection of essential environmental information. The key advantages of implementing SDM techniques in optical measurement systems include the multi-parameter discriminative capability and accuracy improvement. In this paper, to help readers without a telecommunication background better understand how the SDM-based sensing systems can be incorporated, the crucial components of SDM techniques, such as laser beam shaping, mode generation and conversion, multimode or multicore elements using special fibers and multiplexers are introduced, along with the recent developments in SDM amplifiers, opto-electronic sources and detection units of sensing systems. The examples of SDM-based sensing systems not only include Brillouin optical time-domain reflectometry or Brillouin optical time-domain analysis (BOTDR/BOTDA) using few-mode fibers (FMF) and the multicore fiber (MCF) based integrated fiber Bragg grating (FBG) sensors, but also involve the widely used components with their whole information used in the full multimode constructions, such as the whispering gallery modes for fiber profiling and chemical species measurements, the screw/twisted modes for examining water quality, as well as the optical beam shaping to improve cantilever deflection measurements. Besides, the various applications of SDM sensors, the cost efficiency issue, as well as how these complex mode multiplexing techniques might improve the standard fiber-optic sensor approaches using single-mode fibers (SMF) and photonic crystal fibers (PCF) have also been summarized. Finally, we conclude with a prospective outlook for the opportunities and challenges of SDM technologies in optical sensing industry.

As 100-Gb/s digital coherent systems enter commercial deployment, an effort is underway to uncover the technologies that will enable the next-generation optical fiber communication systems. We envisage that future optical transport will be software-defined, enabling flexible allocation of bandwidth resources, with dynamically adjustable per-channel data rates based on instantaneous traffic demand and quality-of-service requirements, leading to unprecedented network agility. Software-defined transponders will have the programmability to adopt various modulation formats, coding rates, and the signal bandwidth based on the transmission distance and type of fiber. Digital signal processing will become increasingly ubiquitous and sophisticated, capable of compensating all types of channel impairments, enabling advanced forward error correction coding, and performing functions previously handled poorly by optical analog hardware such as spectrum shaping and demultiplexing of optical channels.