This work reports the application of a biochar (BC) derived from eucalyptus wood chips to remove pesticides (imidacloprid, acetamiprid and methomyl) from water. The pseudo-second order kinetic adsorption model is the best fit describing the adsorption of pesticides on BC. Furthermore, the Langmuir model correlated well with the adsorption isotherm data for acetamiprid and methomyl, while the Freundlich model was selected to explain the adsorption of imidacloprid on BC. The maximum adsorption capacities for methomyl, imidacloprid and acetamiprid on the BC material are 32.42, 14.75 and 4.87 mg g−1, respectively. The highest adsorption capacity of methomyl on the BC surface could be the result of multilayer adsorption suggested by the adsorption isotherm studies, with imidacloprid (or acetamiprid) monolayer being adsorbed on the BC surface. The structure, functional groups of pesticides, including their polarity, all played an important role contributing to the performance of biochar sorbent. Preferable interactions between the studied pesticides and the BC surface may include π-π interactions and hydrogen bonding. The steric aromatic entity in adsorbed imidacloprid and acetamiprid on the BC surface may hinder the possibility of other pesticide molecules approaching the available sorption sites on the surface.
Photocatalysis is a remarkable methodology that is popular and applied in different interdisciplinary research areas such as the degradation of hazardous organic contaminants in wastewater. In recent years, clay-based photocatalyst composites have attracted significant attention in the field of photocatalysis owing to their abundance, excellent light response ability, and stability. This review describes the combination of clay with focusing photocatalysts such as TiO2, g-C3N4, and Bi-based compounds for degrading organic pollutants in wastewater. Clay-based composites have more active surface sites, resulting in inhibited photocatalyst particle agglomeration. Moreover, clay enhances the creation of active radicals for organic pollutant degradation by separating photogenerated electrons and holes. Thus, the functions of clay in clay-based photocatalysts are not only to act as a template to inhibit the agglomeration of the main photocatalysts but also to suppress charge recombination, which may lengthen the electron–hole pair’s lifespan and boost degrading activity. Moreover, several types of clay-based photocatalysts, such as the clay type and main photocatalyst, were compared to understand the function of clay and the interaction of clay with the main photocatalyst. Thus, this study summarizes the recent clay-based photocatalysts for wastewater remediation and concludes that clay-based photocatalysts have considerable potential for low-cost, solar-powered environmental treatment.
This work reports the preparation and utility of cysteine-functionalized carbon-coated Fe3O4 materials (Cys-C@Fe3O4) as efficient sorbents for remediation of Hg(II)-contaminated water. Efficient removal (90%) of Hg(II) from 1000 ppb aqueous solutions is possible, at very low Cys-C@Fe3O4 sorbent loadings (0.01 g sorbent per liter of Hg(II) solution). At low metal concentrations (5–100 ppb Hg(II)), where adsorption is typically slow, Hg(II) removal efficiencies of 94–99.4% were achievable, resulting in final Hg(II) levels of <1.0 ppb. From adsorption isotherms, the Hg(II) adsorption capacity for Cys-C@Fe3O4 is 94.33 mg g−1, around three times that of carbon-coated Fe3O4 material. The highest partition coefficient (PC) of 2312.5 mgg−1µM−1 was achieved at the initial Hg (II) concentration of 100 ppb, while significantly high PC values of 300 mgg−1µM−1 and above were also obtained in the ultralow concentration range (≤20 ppb). Cys-C@Fe3O4 exhibits excellent selectivity for Hg(II) when tested in the presence of Pb(II), Ni(II), and Cu(II) ions, is easily separable from aqueous media by application of an external magnet, and can be regenerated for three subsequent uses without compromising Hg(II) uptake. Derived from commercially available raw materials, it is highly possible to achieve large-scale production of the functional sorbent for practical applications.
Sulfur composites consisting of electrochemical reactive catalysts/conductive materials are investigated for use in lithium–sulfur (Li–S) batteries (LSBs). In this paper, we report the synthesis, physicochemical and electrochemical properties of CuZnS quantum dots (CZSQDs) decorated with nickel–cobalt–sulfide ((NiCo)–S)) mixed with reduced graphene oxide (rGO)/oxidized carbon nanotube (oxdCNT) (rGO/oxdCNT) ((NiCo)–S@rGO/oxdCNT) composites. These composites are for the purpose of being the sulfur host cathode in Li–S batteries. The as-prepared composites showed a porous structure with the CZSQDs being uniformly found on the surface of the rGO/oxdCNT, which had a specific surface area of 26.54 m2/g. Electrochemical studies indicated that the (NiCo)–S@rGO/oxdCNT cells forming the cathode exhibited a maximum capacity of 1154.96 mAhg−1 with the initial discharge at 0.1 C. The smaller size of the CZSQDs (~10 nm) had a positive effect on the CZSQDs@(NiCo)–S@rGO/oxdCNT composites in that they had a higher initial discharge capacity of 1344.18 mAhg−1 at 0.1 C with the Coulombic efficiency being maintained at almost 97.62% during cycling. This latter property is approximately 1.16 times more compared to the absence of the Cu–Zn–S QD loading. This study shows that the CuZnS quantum dots decorated with a (NiCo)–S@rGO/oxdCNT supporting matrix-based sulfur cathode have the potential to improve the performance of future lithium–sulfur batteries.