Many transitional shear flows show a regime of complex spatiotemporal dynamics that has been linked to directed percolation. Using direct numerical simulations of plane-Poiseuille flow, we identify a state of sparse oblique turbulent bands that exists in a Reynolds number range between 660 and 800, below the anticipated directed percolation transition. The localized turbulent bands will increase steadily in length in sufficiently large domains, or will sustain themselves in a cycle of band extension and breakup in periodic domains. The spreading process is not sensitive to random perturbations, and the width and tilt angle of the band are statistically invariant during the extension. The results show that at least in the case of plane-Poiseuille flow a possible transition in the directed percolation class is preceded by the formation of robust oblique turbulent bands.
It is demonstrated theoretically that the nonlinear stage of the Rayleigh-Taylor instability can be retarded at arbitrary Atwood numbers in a rotating system with the axis of rotation normal to the acceleration of the interface between two uniform inviscid fluids. The Coriolis force provides an effective restoring force on the perturbed interface, and the uniform rotation will always decrease the nonlinear saturation amplitude of the interface at any disturbance wavelength.
The linear stability and energy stability of the plane Poiseuille flow with the isotropic and anisotropic slip boundary conditions are theoretically analyzed and numerically calculated in this paper. The asymptotic expansions of the critical parameters for the linear stability and energy stability are derived from the eigenvalue equations characterizing the least stable modes. The critical Reynolds number for the linear stability based on 1.5 times of the bulk mean streamwise velocity is found to be when the non-dimensional isotropic slip length l ≪ 1, where is the critical Reynolds number under the no-slip boundary condition. The critical Reynolds numbers for the linear stability are calculated for a wide range of anisotropic slip lengths and are found to be no larger than their counterparts in the isotropic slip cases with the same streamwise slip lengths. In the energy stability analyses of the two-dimensional and three-dimensional plane Poiseuille flows with the isotropic slip boundary condition, the critical Reynolds numbers are found to be and , where and are their counterparts under the no-slip boundary condition. In the three-dimensional plane Poiseuille flow with the anisotropic slip boundary condition, the critical Reynolds number for the energy stability increases with the increase in streamwise slip length lx and with the decrease in spanwise slip length lz, and its first-order approximation is .
It has been shown experimentally over nearly 80 years that surface fine roughness of circular pipes has a crucial effect on the natural transition to turbulence. In this Letter, a theoretical explanation is suggested for the roughness-induced instability. Once the nonlinear effect of roughness is introduced (through a pipe with fine corrugation surface), the mean velocity profile becomes unstable to three-dimensional, asymmetric, and helical traveling waves at moderate Reynolds numbers. The threshold of the aspect ratio or shape factor of the roughness element required to cause instability scales as . Inspired by the current model, a scaling form is proposed and the scaled friction factor measurements in rough pipes collapse onto a universal curve.
An exact theoretical analysis is presented, mainly concerning linearly elastic Rayleigh–Taylor (RT) and Richtmyer–Meshkov (RM) instabilities at spherical interfaces by using the decomposition method. A stability analysis is performed to investigate the growth rates of instability with the degree of spherical harmonics n, dimensionless radius Br, Atwood number At, and elastic ratio T. Generally, spherical RT and RM instabilities resemble their planar counterparts when Br or n is large. However, low mode perturbations behave quite differently from planar ones, which is also observed in experiments in inertial confinement fusion and in theoretical analysis in geophysics. An analytical expression is obtained to study the dependence of the cutoff radius. There exist two kinds of it: a small one at which the most-active mode cannot be activated and a larger one that is similar to the planar one. In addition, the elastic parameter strongly affects the evolution of a mode with a lower number. The method is extended to study the RT instability at the interface between an elastic solid and a viscous fluid, which is relevant to some situations encountered experimentally. Finally, RM instability in elastic solids is also investigated, in particular, with regard to the evolution of RM instability with low-mode asymmetries. This method is able to provide guidelines for further studying spherical RT and RM instabilities in complex situations, including the finite thickness effects, elastoplastic properties, and Bell–Plesset effects.
In the previous studies of Rayleigh-Taylor instability, different methods were used to consider the effects of elasticity, viscosity, and magnetic fields. In this paper, a unified method, which was first used for fluids, is validated for different physical models, where the unstable mode is decomposed into an irrotational part and a rotational part, and the latter one includes the effects of nonconservative forces and constitutive relations. Previous results of solid and liquid with or without the effects of magnetic fields and finite thickness can be easily recovered after applying the corresponding interface boundary conditions. In addition, new approximate but analytical solutions of the growth rates for a semi-infinite solid-solid interface and solid-fluid interface are obtained with substantially improved accuracy in comparison with the previous ones.