With strain engineer and MnO2 addition, an ultra-high energy-storage density Wrec = 7.9 J cm−3 and efficiency η = 71% were achieved in Ag(Nb0.85Ta0.15)O3 + 0.25 wt% MnO2 multilayer capacitors.
In this letter, we show via numerical simulations that the typical flow structures appearing in transitional channel flows at moderate Reynolds numbers are not spots but isolated turbulent bands, which have much longer lifetimes than the spots. Localized perturbations can evolve into isolated turbulent bands by continuously growing obliquely when the Reynolds number is larger than 660. However, interactions with other bands and local perturbations cause band breaking and decay. The competition between the band extension and breaking does not lead to a sustained turbulence until Re becomes larger than about 1000. Above this critical value, the bands split, providing an effective mechanism for turbulence spreading.
Many transitional shear flows show a regime of complex spatiotemporal dynamics that has been linked to directed percolation. Using direct numerical simulations of plane-Poiseuille flow, we identify a state of sparse oblique turbulent bands that exists in a Reynolds number range between 660 and 800, below the anticipated directed percolation transition. The localized turbulent bands will increase steadily in length in sufficiently large domains, or will sustain themselves in a cycle of band extension and breakup in periodic domains. The spreading process is not sensitive to random perturbations, and the width and tilt angle of the band are statistically invariant during the extension. The results show that at least in the case of plane-Poiseuille flow a possible transition in the directed percolation class is preceded by the formation of robust oblique turbulent bands.
A local artificial neural network (LANN) framework is developed for turbulence modeling. The Reynolds-averaged Navier-Stokes (RANS) unclosed terms are reconstructed by the artificial neural network based on the local coordinate system which is orthogonal to the curved walls. We verify the proposed model in the flows over periodic hills. The correlation coefficients of the RANS unclosed terms predicted by the LANN model can be made larger than 0.96 in an a priori analysis, and the relative error of the unclosed terms can be made smaller than . In an a posteriori analysis, detailed comparisons are made on the results of RANS simulations using the LANN, global artificial neural network (GANN), Spalart-Allmaras (SA), and shear stress transport (SST) models. It is shown that the LANN model performs better than the GANN, SA, and SST models in the prediction of the average velocity, wall-shear stress, and average pressure, which gives the results that are essentially indistinguishable from the direct numerical simulation data. The LANN model trained at low Reynolds number, , can be directly applied to the cases of high Reynolds numbers, , 10 595, 19 000, and 37 000, with accurate predictions. Furthermore, the LANN model is verified for flows over periodic hills with varying slopes. These results suggest that the LANN framework has a great potential to be applied to complex turbulent flows with curved walls.
The linear stability and energy stability of the plane Poiseuille flow with the isotropic and anisotropic slip boundary conditions are theoretically analyzed and numerically calculated in this paper. The asymptotic expansions of the critical parameters for the linear stability and energy stability are derived from the eigenvalue equations characterizing the least stable modes. The critical Reynolds number for the linear stability based on 1.5 times of the bulk mean streamwise velocity is found to be when the non-dimensional isotropic slip length l ≪ 1, where is the critical Reynolds number under the no-slip boundary condition. The critical Reynolds numbers for the linear stability are calculated for a wide range of anisotropic slip lengths and are found to be no larger than their counterparts in the isotropic slip cases with the same streamwise slip lengths. In the energy stability analyses of the two-dimensional and three-dimensional plane Poiseuille flows with the isotropic slip boundary condition, the critical Reynolds numbers are found to be and , where and are their counterparts under the no-slip boundary condition. In the three-dimensional plane Poiseuille flow with the anisotropic slip boundary condition, the critical Reynolds number for the energy stability increases with the increase in streamwise slip length lx and with the decrease in spanwise slip length lz, and its first-order approximation is .
The Love mode surface acoustic wave biosensor is considered as one of the most promising probing methods in biomedical research and diagnosis, which has been applied to detect the mechano-biological behaviors of cells attached to the surface of the device. Recent studies have reported the structural and functional optimization of Love wave biosensors for reducing propagation loss and improving sensitivity; however, the relevant device performance needs to be analyzed in depth in terms of device structure, electromechanical properties of piezoelectric crystal substrates, viscoelastic properties of wave guiding layers, and the effect of liquid loading. In this study, a 36° YX-LiTaO3 based Love wave sensor with a parylene-C wave guiding layer is considered as a cell-based biosensor. A theoretical model is proposed to describe the Love wave propagation in the wave guiding layer and penetration in the liquid medium. Decay length δ for the Love wave penetration in liquid is found to be in the order of ∼50 nm, which agrees well with experimental observations. In addition, the effects of the viscoelastic wave guiding layer and liquid medium on the effective electromechanical coupling coefficient K2 of the sensor, the propagation loss PL, and sensor response to mass loading (mass sensitivity) are investigated. The numerical results indicate that the maximum propagation velocity is found at h/λ = 0, where h is the thickness of the wave guiding layer and λ is the wavelength; and the optimal coupling coefficient and mass sensitivity can be obtained at h/λ = 0.045 and h/λ = ∼0.06 in a vacuum or ∼0.058 in water, respectively. For a good combination of these device performance parameters, it is suggested that the optimal wave guiding layer thickness in a Love wave biosensor is at the vicinity of h/λ = ∼0.05 in a vacuum and ∼0.048 in liquid (water).