This paper presents the metrological quality and mechanical properties of models in the form of hook holders manufactured from MED610 polymer material using PolyJet Matrix (PJM) technology. Measurements in the dimensional and shape analysis were made using the optical method with a microscope. The mechanical test was estimated by static tensile testing of the fabricated parts. A comprehensive approach to both the analysis of test results based on standardized samples and real hook models makes the presented results of great scientific and engineering value and creates the possibility of practical use in the medical industry, which has not been so comprehensively presented in the currently published research papers. Analyzing the results of measurements of the geometrical characteristics of the elements, it can be concluded that the PolyJet Matrix 3D printing technology has demonstrated a high level of precision in manufacturing the prototype parts. The static tensile test of samples, taking into account the printing directions, showed a high anisotropy of mechanical properties. The results of both strength and simulation tests indicate that it is necessary to assume a relatively high safety factor, the value of which depends on the direction of printing, which, in the case of such a responsible medical application, is very important.
1 August 2024 in 3D Printing and Additive Manufacturing
The article presents the results of tribological research of sample models manufactured using three separate 3D printing technologies: selective laser sintering—SLS, photo-curing of liquid polymer resins—PolyJet Matrix (PJM) and fused deposition modeling—FDM. The impact of process parameters (printing direction, layer thickness, and energy density for SLS) on tribological properties was assessed through linear wear and coefficient of friction. The research was carried out to assess the possibility of using 3D printing for the quick manufacturing of casting models, which has a significant impact on shortening the time of implementation for mass production of the casting process. The research results proved the possibility of controlling the technological process in a manner allowing to produce models with controlled properties, including tribological parameters. In addition, the results for three additive technologies and different materials were compared by using the same friction parameters.
15 August 2022 in Tehnicki vjesnik - Technical Gazette
The development of modern manufacturing technologies related to the ongoing industrial revolution Industry 4.0, is largely related to the dynamic development of materials chemistry. This means that currently 3D printing technologies allow the product...
1 February 2024 in 3D Printing and Additive Manufacturing
In connection with the growing demand of the medical and medicine-related industry for materials exhibiting biocompatible properties used as part of three-dimensional (3D) printing additive technologies. The article presents research results concerning rheological and selected mechanical properties of a modern, photocurable MED610 resin, which is also used mainly in medicine, as well as dentistry. The article also shows extensive results of testing bending stress relaxation and creep, as well as the tensile strength of samples created with the PolyJet Matrix (PJM) technology. The authors used various sample types, including ones of unique shape and a hexagonal cellular structure. The analysis of the impact of element orientation on the working platform of the machine (3D printer) on the obtained test results (so-called printing direction—Pd) was also taken into account as a key technological parameter of the 3D printing process. Experimental rheological curves were matched with theoretical curves resulting from the application of a five-parameter Maxwell–Wiechert (M-W) model in the case of stress relaxation and a five-parameter Kelvin–Voigt model for creep. Very good matches were achieved, mean coefficients Chi2 = 0.0014 and R2 = 0.9956 for matching the five-parameter M-W model and mean coefficients Chi2 = 0.000006 and R2 = 0.9992 enable recommending the obtained results to be used for various engineering calculations, especially computer simulations. Moreover, the use of relaxation curves can significantly increase the construction capabilities within the design process, which includes the MED610 material.
Appropriate recursive formulas were obtained for generating repeatable and self-similar cellular structures obtained from PLA using the FDM/FFF method. The H1s, H2s self-similar models show mechanical self-similarity relationships based on simulation and compression test. In addition, the H1s models show higher displacement values than the H1i recurrent models. For the results of the H2s models, it is not conclusive whether they show higher displacement values.
This study investigates the mechanical behavior and anisotropy of cellular structures fabricated using PolyJet Matrix (PJM) technology from RGD 720 photopolymer resin. Standard ISO 527 specimens were produced at build orientations of 0°, 45°, and 90° to evaluate the influence of printing direction on tensile properties. Based on these results, the optimal 0° orientation was selected for further analysis of cellular structures, including hexagonal, spiral, and quasi-self-similar geometries, manufactured in both unfilled and silicone-filled configurations. Static tensile tests were performed to determine load–displacement characteristics, maximum load, and deformation behavior. The results reveal a strong dependence of mechanical properties on build orientation, with the highest strength observed at 0° and the lowest at 90°, confirming significant material anisotropy. This behavior was further quantified using first- and second-order anisotropy coefficients derived from experimental data. The introduction of silicone filling improved load-bearing capacity, reduced variability, and promoted a more ductile failure mechanism. Among the analyzed geometries, quasi-self-similar structures exhibited the best mechanical performance, while unfilled structures showed lower strength and higher deformation. The findings demonstrate that both build orientation and structural design are critical factors in optimizing the mechanical properties of additively manufactured components and provide a basis for designing tailored cellular structures for engineering applications.