Shahrooz Hajighorbani

Dr. Shahrooz Hajighorbani


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2014 in International Journal of Photoenergy
Verified
Journal Article
Open access
PDF file
SHShahrooz Hajighorbani
Shahrooz Hajighorbani
MRMohd Amran Mohd Radzi
Mohd Amran Mohd Radzi
MKMohd Zainal Abidin Ab. Kadir
Mohd Zainal Abidin Ab. Kadir
SSSuhaidi Shafie
Suhaidi Shafie
RKRazieh Khanaki
Razieh Khanaki
Mohammad Reza MaghamiMohammad Reza Maghami
Mohammad Reza Maghami
Photovoltaic system (PV) has nonlinear characteristics which are affected by changing the climate conditions and, in these characteristics, there is an operating point in which the maximum available power of PV is obtained. Fuzzy logic controller (FLC) is the artificial intelligent based maximum power point tracking (MPPT) method for obtaining the maximum power point (MPP). In this method, defining the logical rule and specific range of membership function has the significant effect on achieving the best and desirable results. This paper presents a detailed comparative survey of five general and main fuzzy logic subsets used for FLC technique in DC-DC boost converter. These rules and specific range of membership functions are implemented in the same system and the best fuzzy subset is obtained from the simulation results carried out in MATLAB. The proposed subset is able to track the maximum power point in minimum time with small oscillations and the highest system efficiency (95.7%). This investigation provides valuable results for all users who want to implement the reliable fuzzy logic subset for their works.

27 May 2016 in Energies
Verified
Journal Article
Open access
PDF file
Muhammad Ammirrul  Atiqi Mohd ZainuriMuhammad Ammirrul Atiqi Mohd Zainuri
Muhammad Ammirrul Atiqi Mohd Zainuri
MRMohd Amran Mohd Radzi
Mohd Amran Mohd Radzi
ASAzura Che soh
Azura Che soh
NMNorman Mariun
Norman Mariun
NRNasrudin Abd Rahim
Nasrudin Abd Rahim
SHShahrooz Hajighorbani
Shahrooz Hajighorbani
This paper presents improvement of a harmonics extraction algorithm, known as the fundamental active current (FAC) adaptive linear element (ADALINE) neural network with the integration of photovoltaic (PV) to shunt active power filters (SAPFs) as active current source. Active PV injection in SAPFs should reduce dependency on grid supply current to supply the system. In addition, with a better and faster harmonics extraction algorithm, the SAPF should perform well, especially under dynamic PV and load conditions. The role of the actual injection current from SAPF after connecting PVs will be evaluated, and the better effect of using FAC ADALINE will be confirmed. The proposed SAPF was simulated and evaluated in MATLAB/Simulink first. Then, an experimental laboratory prototype was also developed to be tested with a PV simulator (CHROMA 62100H-600S), and the algorithm was implemented using a TMS320F28335 Digital Signal Processor (DSP). From simulation and experimental results, significant improvements in terms of total harmonic distortion (THD), time response and reduction of source power from grid have successfully been verified and achieved.

28 January 2016 in Energies
Verified
Journal Article
Open access
PDF file
SHShahrooz Hajighorbani
Shahrooz Hajighorbani
MRMohd Amran Mohd Radzi
Mohd Amran Mohd Radzi
MKMohd Zainal Abidin Ab. Kadir
Mohd Zainal Abidin Ab. Kadir
SSSuhaidi Shafie
Suhaidi Shafie
Muhammad Ammirrul  Atiqi Mohd ZainuriMuhammad Ammirrul Atiqi Mohd Zainuri
Muhammad Ammirrul Atiqi Mohd Zainuri
This paper presents a hybrid maximum power point tracking (MPPT) method to detect the global maximum power point (GMPP) under partially shaded conditions (PSCs), which have more complex characteristics with multiple peak power points. The hybrid method can track the GMPP when a partial shadow occurs either before or after acquiring the MPP under uniform conditions. When PS occurs after obtaining the MPP during uniform conditions, the new operating point should be specified by the modified linear function, which reduces the searching zone of the GMPP and has a significant effect on reducing the reaching time of the GMPP. Simultaneously, the possible MPPs are scanned and stored when shifting the operating point to a new reference voltage. Finally, after determining the possible location of the GMPP, the GMPP is obtained using the modified P&O. Conversely, when PS occurs before obtaining the MPP, the referenced MPP should be specified. Thus, after recognizing the possible location of the GMPP, the modified P&O can be used to obtain the GMPP. The simulation and experimental implementations for the proposed algorithm are performed with different scenarios of shadowing under different irradiations, which clearly indicate that the proposed method is robust and has a fast tracking speed. Moreover, this work presents the load sizing method for PSCs to avoid controller failure when detecting the GMPP. Additionally, in this paper, the user-friendly method for programming the digital signal processing (DSP) via Simulink/MATLAB is presented in detail.

27 October 2015 in Energies
Verified
Journal Article
Open access
PDF file
SHShahrooz Hajighorbani
Shahrooz Hajighorbani
MRMohd Amran Mohd Radzi
Mohd Amran Mohd Radzi
MKMohd Zainal Abidin Ab. Kadir
Mohd Zainal Abidin Ab. Kadir
SSSuhaidi Shafie
Suhaidi Shafie
Photovoltaic (PV) systems represent a clean, renewable source of energy that has non-linear current-voltage (I-V) and power-voltage (P-V) characteristics. To increase the efficiency, a PV system must operate at the maximum power point (MPP) to produce the maximum available power. Under uniform conditions, there is only a single MPP in the P-V curve of a PV system; however, determining the MPP is more complicated under partially shaded conditions (PSCs) because multiple peak power points exist. In recent years, various studies have been performed to obtain the highest peak power point under PSCs, which is referred to as the global maximum power point (GMPP). In this paper, a novel method based on mathematical analysis that reduces the search zone and simultaneously identifies the possible MPPs in the specified zone is proposed; this proposed method is called the dual search maximum power point (DSMPP) algorithm. To evaluate the effectiveness of the proposed method, simulation and hardware implementations are carried out. The results show that the search time of GMPP is significantly reduced and the GMPP is detected in the minimum amount of time with high accuracy and minimum oscillation in the power produced.

5 December 2016 in World Journal of Engineering
Verified
Journal Article
Closed access
EAEhsan Mohsin Alhamdawee
Ehsan Mohsin Alhamdawee
NMNashiren Mailah
Nashiren Mailah
MRMohd Amran Mohd Radzi
Mohd Amran Mohd Radzi
SSSuhaidi Bin Shafie
Suhaidi Bin Shafie
SHShahrooz Hajighorbani
Shahrooz Hajighorbani
ATAhmed Qasim Turki
Ahmed Qasim Turki
Purpose: This work aims to overcome the drawbacks of the nonlinear characteristics of the photo-voltaic (PV) system which are affected by the atmospheric variations. Design/methodology/approach: As a result, the optimum power point on these characteristics accordingly changes and the efficiency of photovoltaic systems reduces. Maximum power point tracking (MPPT) algorithms track this optimum point and enhance the efficiency despite the irradiance and temperature changes. Findings: The conventional perturbation and observation (P&O) algorithm uses fixed step sizes to increment and decrement the duty ratio that leads to slow response time and continuous oscillation around the MPP at steady state conditions. The paper proposes a fuzzy logic-based controller that overcomes the drawbacks of P&O algorithm in term of response time and the oscillation. Originality/value: MATLAB/Simulink environment was used to model and simulate the KC200GT PV module, direct current (DC)-DC boost converter and the MPPT algorithms.

5 December 2016 in World Journal of Engineering
Verified
Journal Article
Closed access
SHShahrooz Hajighorbani
Shahrooz Hajighorbani
MRMohd Amran Mohd Radzi
Mohd Amran Mohd Radzi
MKMohd Zainal Abidin Ab. Kadir
Mohd Zainal Abidin Ab. Kadir
SSSuhaidi Bin Shafie
Suhaidi Bin Shafie
Purpose: The purpose of this study is to show in power-voltage curve, a unique maximum power point (MPP) is existed which has the maximum power. Design/methodology/approach: This paper presents a MPP tracker algorithm for a standalone system includes DC-DC buck converter and battery storage. Findings: By using this algorithm, the maximum available power is achieved and simultaneously, the battery is charged and also protected against overcharge and discharge. The operation of the proposed algorithm is evaluated in with Proteus software to be sure that it can be implemented in microcontroller in reality. Originality/value: The simulations results show that the proposed algorithm is able to detect the MPP under different irradiations. Moreover, the battery is charged during the day by PV and protected against overcharge and discharge.