Tens of thousands of wireless industrial monitoring deployments exist today, logging more than 18 billion operating hours. These solutions have been around for over a decade and are based on standards such as WirelessHART and ISA100.11a to provide performance guarantees to the applications. The new trend in industry deployments is the convergence of operational and information technologies happening through the Industrial Internet of Things (IIoT) paradigm. The challenge is to bridge the performance of these well-proven industrial standards with the interoperability of IP-based systems. The Internet Engineering Task Force (IETF), the organization behind most of the technical solutions of the Internet, has produced a set of specifications with this requirement in mind. The output of this effort is the 6TiSCH protocol stack based on open standards, such as those that have played a key role in the Internet’s ubiquitous adoption. The standardization of 6TiSCH is done. The state-of-the-art research work focus is on important, but niche, optimizations and performance evaluations of the 6TiSCH stack. This paper takes a different approach – it evaluates the performance of the standards-compliant 6TiSCH solution from the end user point of view. It does so on two experimental testbeds, in typical IoT test scenarios based on a well-defined experimentation methodology. We provide a set of Key Performance Indicators (KPIs) useful for the end user to decide whether the 6TiSCH technology is a good fit performance-wise for a particular use case. We demonstrate reliability of a vanilla open-source implementation of 6TiSCH above 99.99%, upstream latency on the order of a second and radio duty cycle well below 1%.
A multi-relay assisted orthogonal frequency division multiplexing system with index modulation is proposed in this letter, assuming that amplify-and-forward (AF) relaying protocol is adopted at relays. Two commonly used AF protocols are considered: 1) fixed-gain AF and 2) variable-gain AF relaying protocols. To utilize relays in an efficient manner, we also employ two multi-carrier relay selection schemes termed bulk and per-subcarrier relay selection in the proposed system. We analyze the outage performance of the proposed system and derive closed-form expressions of the average outage probabilities (AOPs) for all cases with different AF relaying protocols and multi-carrier relay selection schemes. In addition, we obtain the asymptotic expressions of AOPs in the high signal-to-noise ratio region, by which it is proven that the full diversity gain equaling the number of relays is attainable.
In 2010 IEEE 802.11ah working group has started with work on designing their first standard in sub-GHz spectrum, with the goal to bring a WLAN standard with extended range, which, among other things, could provide communication services in the area of IoT applications. Enhancements of achievable communication range in IEEE 802.11ah are results of modifications done on physical and MAC layer. In this paper we examine performance of IEEE 802.11ah systems in terms of achievable range and bit error rate (BER) of the modulation and coding scheme (MCS) achieving the longest range. In order to examine fading effect on achievable range, we have modeled and compared scenarios with and without fading, in urban environment, where no techniques for fading mitigation are implemented.
This paper outlines an extensive analysis of the case of Montenegro’s maritime surveillance system becoming integrated within the European Common Information Sharing Environment (CISE). Threats to secure maritime borders across Europe are ever-presen...