Transverse cracking is a common distress of semi-rigid asphalt pavement in China. Crack detection offers essential information for pavement performance evaluation and maintenance. A vibration-based method is proposed for transverse cracking identification of asphalt pavement. Vibration signals of the running vehicle at the transverse-cracked sections and the adjacent uncracked sections are measured and preliminarily analysed in time domain. Symlet3 wavelet is used for signal denoising. Frequency domain analysis of signals by fast Fourier transform (FFT) and discrete wavelet transform (DWT) shows that the occurrence of the transverse crack leads to a dramatic increase of energy in the sensitive frequency band (10∼20 Hz). Considering the computation efficiency, the dual relative energy (DRE) process by FFT and DWT is proposed for crack detection. In addition, the continuous wavelet time-frequency analysis is utilised to locate the transverse cracking precisely. This approach seems promising for the rapid identification of pavement cracks.
A pavement structural survey plays a vital role in road maintenance and management. This study was intended to explore the feasibility of a non-stop pavement structure assessment method by analyzing the vibration data from a vehicle sensor. In this study, three falling weight deflectometer (FWD) tests and four vehicle vibration tests were conducted on five pavement structures. The FWD test results show that the continuously reinforced composite pavement has a higher structural stiffness than the semi-rigid base asphalt pavement. According to the statistical distribution of vehicle acceleration, a distribution parameter, the peak probability density (PPD), was proposed. The correlation coefficient (−0.722) of the center deflection (D1) and PPD indicates a strong correlation between the two variables. Therefore, PPD is strongly correlated with pavement structural stiffness. This study proposed a novel characterization method for pavement structural conditions based on the distribution parameter of the vehicle vibration signal.
1 May 2022 in Canadian Journal of Civil Engineering
In this paper we propose a novel method for assessing pavement structure based on multi-source data from a moving vehicle. The classification of pavement on subgrade (POS) and pavement on bridge deck (PBD) was used as examples. A mobile acquisition system was designed to collect multi-source data. Vehicle accelerations on PBD and POS were analyzed, and some features were selected to build 15 Support Vector Machine classifiers. Our results show that some features are helpful, including vehicle speed, maximum value, minimum value, standard deviation of acceleration in the time domain, and three peak frequencies in the frequency domain. The accuracy was 91.67%. Then, some sections were tested with a falling weight deflectometer to verify the structural differences between POS and PBD. Our results provide a novel method for analyzing pavement structure via vehicle vibration, and this work will be built on for more detailed analysis of pavement structure in the future.