Soft robotic grippers often incorporate pneumatically-driven actuators that can elastically deform to grasp delicate, curved organic objects with minimal surface damage. The complexity of the actuator geometry and the nonlinear stress–strain behavior of the stretchable material during inflation make it difficult to predict actuator performance prior to prototype fabrication. In this work, a scalable modular elastic air-driven actuator made from polydimethylsiloxane (PDMS) is developed for a mechanically compliant robotic gripper that grasps individual horticultural plants and fungi during automated harvesting. The key geometric design parameters include the expandable surface area and wall thickness of the deformable structure used to make contact with the target object. The impact of these parameters on actuator displacement is initially explored through simulation using the Mooney–Rivlin model of hyperelastic materials. In addition, several actuator prototypes with varying expandable wall thicknesses are fabricated using a multistep soft-lithography molding process and are inserted in a closed ring assembly for experimental testing. The gripper performance is evaluated in terms of contact force, contact area with the target, and maximum payload before slippage. The viability of the gripper with PDMS actuators for horticultural harvesting applications is illustrated by gently grasping a variety of mushroom caps.
A light driven microvalve activated by a thin organic photoelectric film that controls the expansion and shrinkage of a pH sensitive HEMA-AA hydrogel actuator is described in this paper. The self-assembled monolayer of oriented bacteriorhodopsin (bR) purple membrane patches are immobilized on a porous bio-functionalized gold (Au) surface using a biotin molecular recognition technique. When exposed to visible light, each bR molecule in the monolayer acts as a simple proton pump which transports hydrogen ions from the cytoplasmic to the extracellular side through a transmembrane ion channel that connects both sides of the membrane. The flow of ions from the photon activated bR changes the pH value of the ionic solution that surrounds the gel microactuator. The chargeable polymeric network undergoes a measureable geometric change when the pH of the ionic solution is shifted to the phase transition point pKa. The fabrication of the thin bR film and photo-responsive hybrid hydrogel are discussed. Preliminary experiments show that the 13nm self-assembled photoelectric layer can generate approximately 1.3mV/(mW÷cm2) when exposed to an 18mW, 568nm light source. The photo-voltage produced by the monolayer is believed to be sufficient to change the pH of the surrounding ionic solution from its neutral state and trigger the swelling of the gel. Several design issues that need to be resolved before a fully functional light-driven microvalve can be created are identified and discussed.
12 July 2011 in Journal of Microelectromechanical Systems
The fabrication of dry ultrathin photoelectric layers is described in this paper. The self-assembled monolayer of oriented purple membrane (PM) patches from bacteriorhodopsin (bR) is created on a bio-functionalized gold (Au) surface using a biotin molecular recognition technique. The biotin enables the extracellular side of the bR PMs to be accurately labeled. During the biochemical immobilization process, the biotinylated alkylthiols modify the Au surface using HS terminals of the thiols and affix the labeled bR to the functionalized surface using streptavidin-biotin interactions. An optically transparent indium tin oxide (ITO) electrode is then placed on top of the finished assembly to complete the circuit of the photocell for testing and performance verification. An experimental study shows that the proposed self-assembly method can produce a 12.33 nm thick photoelectric layer that generates nearly 0.54 mV/(mW ·cm2) when exposed to a 568-nm laser beam. In contrast, other immobilization techniques such as electric field sedimentation produce dry bR films that are more than 10 μm thick. These ultrathin photoelectric layers can be used to create nanoscale light sensors and photocells.