Membrane separation processes have become increasingly popular in many industries because of their ability to treat wastewater and purify water. However, one of the main problems related to the processes is organic fouling, which can significantly reduce their efficiency and cause membrane damage. This review provides a summary of the various forms of organic fouling that can occur in membrane separation methods and examines the factors that lead to their development. The article evaluates the progress made in different techniques designed to manage and reduce organic fouling, such as physical cleaning methods, chemical cleaning agents, and modifications to the membrane surface, including ultrasonic and membrane vibration methods. The review also highlights recent advances in emerging 3D printing technology to mitigate membrane fouling. Finally, the review provides a brief summary of the conclusions and future directions for research in the field of organic fouling control and mitigation in membrane separation processes.

Enhancing the performance of polymeric membranes by nanomaterials has become of great interest in the field of membrane technology. The present work aimed to fabricate polyvinylidene fluoride (PVDF)-hybrid nanocomposite membranes and modify them with TiO₂ and/or BiVO₄ nanoparticles and/or carbon nanotubes (CNTs) in various ratios. Their photocatalytic performance under visible light was also investigated. All modified PVDF membranes exhibited higher hydrophilicity (lower contact angle of water droplets) than that of the neat membrane used as a reference. The membranes were characterized by using bovine serum albumin (BSA) as model dairy wastewater. The hybrid membranes had better antifouling properties as they had lower irreversible filtration resistance than that of the neat membrane. Hybrid PVDF membranes containing TiO₂/CNT/BiVO₄ showed the highest flux and lowest irreversible resistance during the filtration of the BSA solution. PVDF-TiO₂/BiVO₄ had the highest flux recovery ratio under visible light (70% for the PVDF mixed with 0.5% TiO₂ and 0.5% BiVO₄). The hydrophilicity of membrane surfaces increased with the incorporation of nanoparticles, preventing BSA to bind to the surface. This resulted in a slight decrease in BSA and chemical oxygen demand rejections, which were still above 97% in all cases.

The effects of direct ozone treatment, UV treatment and combined ozone/UV treatment on the color and microbiological count of milled wheat flour were compared. The changes in color and microbiological properties during a 19-week storage period were also examined. Each of the treatments significantly reduced the microbial count of the flour and resulted in whiter flour. The results showed that only the combined treatment furnished flour suitable for consumption. The effect of the combined treatment was similar to, but more pronounced than that of ozone treatment. Changes in the quality of the dough were observable, similar by as in response to other oxidizing agents.

Membrane filtration is an effective technique for separating micro- and nano-sized oil droplets from harmful oil-contaminated waters produced by numerous industrial activities. However, significant flux reduction discourages the extensive application of this technology; therefore, developing antifouling membranes is necessary. For this purpose, various titanium dioxide/carbon nanotube (TiO₂/CNT) nanocomposites (containing 1, 2, and 5 wt.% multi-walled CNTs) were used for the modification of polyvinylidene fluoride (PVDF) ultrafilter (250 kDa) membrane surfaces. The effects of surface modifications were compared in relation to the flux, the filtration resistance, the flux recovery ratio, and the purification efficiency. TiO₂/CNT_2% composite modification reduced both irreversible and total filtration resistances the most during the filtration of 100 ppm oil emulsions. The fluxes were approximately 4–7 times higher compared to the unmodified PVDF membrane, depending on the used transmembrane pressure (510, 900, and 1340 L/m²h fluxes were measured at 0.1, 0.2, and 0.3 MPa pressures, respectively). Moreover, the flux recovery ratio (up to 68%) and the purification efficiency (95.1–99.8%) were also significantly higher because of the surface modification, and the beneficial effects were more dominant at higher transmembrane pressures. TiO₂/CNT_2% nanocomposites are promising to be applied to modify membranes used for oil–water separation and achieve outstanding flux, cleanability, and purification efficiency.

Microwave irradiation is a novel and very promising technology for sludge conditioning. As pretreatment, it has a verified beneficial effect on the microbial degradation and anaerobic digestion of sewage sludge, but in present work we dealt with the applicability of microwave pretreatments for food industrial sludge. However, studies cannot be found that specialize on the effects of the MW treatments with different intensities on the anaerobic digestion of sludge. In our work we focused on the examination of the effect of MW pretreatment for 0.5, 2.5, and 5 W/g on the carbonaceous biochemical oxygen demand (CBOD₅), solubilization of organic matters (sCOD/tCOD), and the mesophilic anaerobic digestion of dairy sewage sludge. It can be concluded that the MW pretreatments were appropriate to enhance the efficiency of anaerobic digestion. With MW pretreatments the specific biogas product could be increased from 220 mL g⁻¹ to more than 600 mL g⁻¹ because of the increased solubility (from 9.7% to more than 40%), and the enhanced accessibility of organic compounds for decomposing bacteria. © 2010 American Institute of Chemical Engineers Environ Prog, 2011