Hideki Kyogoku

Prof. Hideki Kyogoku

orcid

Research Focus & Metrics

Academic Career Length

30Years (1997-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in Mechanical Engineering Reviews
Verified
Journal Article
Open access
PDF file
HKHideki Kyogoku
Hideki Kyogoku
TIToshi-Taka Ikeshoji
Toshi-Taka Ikeshoji
In this review, the analysis of melting and solidification phenomena and the mechanism of the occurrence of defects as well as the analysis of melting and solidification using the numerical simulation in laser powder bed fusion (LPBF) process were introduced. In addition, the strategies of suppression of defects were described. The melting and solidification phenomena during LPBF process are relatively similar to those during welding. Since the plume brings about the strong recoil pressure on the melt pool, the keyhole takes place. And when the depth of keyhole becomes more than a threshold, the keyhole pore remains at the bottom of melt pool. Since the plume also brings about spattering and blows out powder, the gas pores are prone to occur easily. The micro-simulation of melting and solidification enables to reproduce the real phenomena. The macro-simulation of melting and solidification phenomena is one of the effective tools to predict the optimum fabrication condition. In order to prevent the occurrence of defects, it is significant not only to obtain the optimum fabrication condition using the process map but also to develop the simulation software. In addition, the use of the monitoring and feedback control system is greatly effective. Therefore the development of the cyber-physical system is needed.

12 June 2021 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
KYKenya Yuasa
Kenya Yuasa
MTMasaharu Tagami
Masaharu Tagami
MYMakiko Yonehara
Makiko Yonehara
TIToshi-Taka Ikeshoji
Toshi-Taka Ikeshoji
KTKoki Takeshita
Koki Takeshita
HKHideki Kyogoku
Hideki Kyogoku
Metal additive manufacturing technology requires a real-time monitoring and feedback control system to assure the quality of the final products. In particular, it is essential to reveal the phenomena of recoating and melting-solidification processes in laser powder bed fusion using a real-time monitoring system because they influence strongly the occurrence of defects. This study was conducted to elucidate the correlation among the powder characteristics, recoating conditions, and surface morphology of a powder bed in the recoating process to determine the relationship between the surface morphology of the powder bed and the final product quality. To this end, a surface morphology measurement system composed of a powder recoating test bench and a layer surface morphology measurement apparatus was first designed and fabricated. Then, it was used to quantify the surface morphology of the powder bed. Specifically, the influences of the different powder characteristics and the recoating parameters of the powder supply ratio and recoating speed on the surface morphology of the powder bed were investigated using various powders of Al-10Si-0.4Mg (AlSi10Mg) alloy and Inconel 718 (IN718) alloy. The surface morphology of the powder bed was measured as the value of 2σ at a resolution of 30 μm in height. It was found that the angle of repose and the basic flow energy of the bulk powder are promising parameters for evaluating the surface morphology. The surface morphology was significantly affected by the powder characteristics and recoating speed. The value of 2σ for the AlSi10Mg powder increased rapidly over a recoating speed of 50 mm/s for all powders. The value of 2σ for the irregularly shaped AlSi10Mg powder was approximately 19 μm, and the 2σ values for the other powders were approximately 17 μm at a recoating speed of 15 mm/s. However, at a recoating speed greater than 300 mm/s, the irregularly shaped powder exhibited better surface morphology than did the spherical powder. The recycling process deteriorated the flowability of the new powder. However, the surface morphology of the spherical recycled powder was similar to that of the spherical powder. Consequently, the correlation among the powder characteristics, recoating conditions, and surface morphology of the powder bed was revealed by employing the surface morphology measurement system. Quantification of the surface morphology of the powder bed using the monitoring system facilitates control of the recoating process to prevent the occurrence of defects.

24 November 2021 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MYMakiko Yonehara
Makiko Yonehara
CKChika Kato
Chika Kato
TIToshi-Taka Ikeshoji
Toshi-Taka Ikeshoji
KTKoki Takeshita
Koki Takeshita
HKHideki Kyogoku
Hideki Kyogoku
The availability of an in-situ monitoring and feedback control system during the implementation of metal additive manufacturing technology ensures that high-quality finished parts are manufactured. This study aims to investigate the correlation between the surface texture and internal defects or density of laser-beam powder-bed fusion (LB-PBF) parts. In this study, 120 cubic specimens were fabricated via application of the LB-PBF process to the IN 718 Ni alloy powder. The density and 35 areal surface-texture parameters of manufactured specimens were determined based on the ISO 25,178–2 standard. Using a statistical method, a strong correlation was observed between the areal surface-texture parameters and density or internal defects within specimens. In particular, the areal surface-texture parameters of reduced dale height, core height, root-mean-square height, and root-mean-square gradient demonstrate a strong correlation with specimen density. Therefore, in-situ monitoring of these areal surface-texture parameters can facilitate their use as control variables in the feedback system.

13 August 2020 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
MYMakiko Yonehara
Makiko Yonehara
TIToshi-Taka Ikeshoji
Toshi-Taka Ikeshoji
TNTakaya Nagahama
Takaya Nagahama
TMTakashi Mizoguchi
Takashi Mizoguchi
MTMakoto Tano
Makoto Tano
HKHideki Kyogoku
Hideki Kyogoku

27 November 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
TIToshi-Taka Ikeshoji
Toshi-Taka Ikeshoji
MYMakiko Yonehara
Makiko Yonehara
CKChika Kato
Chika Kato
YYYuma Yanaga
Yuma Yanaga
KTKoki Takeshita
Koki Takeshita
HKHideki Kyogoku
Hideki Kyogoku
Laser powder additive manufacturing (PBF-LB) is an additive manufacturing method capable of producing high-precision and fully dense parts. However, nondestructively quality assurance of no internal defects remains challenging. Mitigating internal defects requires elucidating their formation mechanism and improving the PBF-LB process conditions. Therefore, we developed an in-situ monitoring system that combines surface morphology measurement by fringe projection and thermal field measurement with a high-speed camera. On heterogeneous surfaces in a practical multi-track PBF-LB process, a roughness index of the built part surface altered cyclically, consistent with the change in the angle between laser scanning and atmospheric gas flow. The high-speed camera monitoring showed that the melt pool was asymmetrical and spindle-shaped and that spatter was emitted mainly from the built part side of the melt pool. Furthermore, it was found that the built-part surface morphology under the powder layer affected the stability of the melt pool. As a result, a graphical representation of the melt pool and spattering for heterogeneous surfaces was proposed. Although it is still difficult to theoretically estimate the process window in which no spattering and no internal defects, in-situ monitoring equipment will provide knowledge to elucidate spattering and internal defects formation.

14 May 2021 in Crystals
Verified
Journal Article
Open access
PDF file
TITakafumi Ikeda
Takafumi Ikeda
MYMakiko Yonehara
Makiko Yonehara
TIToshi-Taka Ikeshoji
Toshi-Taka Ikeshoji
TNToru NOBUKI
Toru NOBUKI
MHMinoru Hatate
Minoru Hatate
HKHideki Kyogoku
Hideki Kyogoku
Recently, high-entropy alloys (HEAs) have attracted much attention because of their superior properties, such as high strength and corrosion resistance. This study aimed to investigate the influences of process parameters on the microstructure and mechanical properties of CoCrFe NiTiMo HEAs using a laser-based powder bed fusion (LPBF) process. In terms of laser power and scan speed, a process map was constructed by evaluating the density and surface roughness of the as-built specimen to optimize the process parameters of the products. The mechanical properties of the as-built specimens fabricated at the optimum fabrication condition derived from the process map were evaluated. Consequently, the optimum laser power and scan speed could be obtained using the process map evaluated by density and surface roughness. The as-built specimen fabricated at the optimum fabrication condition presented a relative density of more than 99.8%. The microstructure of the as-built specimen exhibited anisotropy along the build direction. The tensile strength and elongation of the as-built specimen were around 1150 MPa and more than 20%, respectively.