AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, Department of Process Control, Poland, Kraków, Mickiewicza 30 av.
Dr. Paweł Orkisz
AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, Department of Process Control, Poland, Kraków, Mickiewicza 30 av.
The aim of the work is to investigate power flows in the vibration reduction system equipped with a magnetorheological (MR) damper and energy regeneration. For this purpose, experiments were conducted in the test rig compound of the shaker and the vibration reduction system (electromagnetic harvester, MR damper, spring) which are attached to the sprung mass. The experimental data acquired under sine excitations enabled us to analyze instantaneous power fluxes, as well as a rate of inertial energy changes in the system.
1 April 2020 in Journal of Low Frequency Noise, Vibration and Active Control
The paper aims at evaluating the sliding mode control parameters used to tune a dynamic damper in the vibration reduction system. The effectiveness of the presented vibration reduction system and the power of the controlled voltage source supplying an electrodynamic linear motor have been analysed. The classical sliding mode control algorithm has been modified based on the analyses of results of calculation. The operation of the modified algorithm has been checked during a simulation. The proposed vibration reduction system was implemented on a laboratory stand. The measurement results have confirmed the effectiveness of the considered system.
This study investigated the self-sensing mechanism in the electromagnetic vibration-based energy harvester (EV-EH) prototype specially engineered for a commercial magnetorheological (MR) damper. The objective of the work is to demonstrate that the EV-EH unit with a specific self-powered feature can also be employed as a relative velocity sensor in the system. To do this, the self-sensing action of the unit was experimentally studied over the assumed range of working conditions. The analysis of the test results and the determined self-sensing function indicated that the EV-EH has a highly accurate monitoring capability. The EV-EH self-sensing and self-powered features confirm the potentials and applicability of the unit for MR damper control in a vibration reduction system with energy regeneration.
This article presents mechanical vibrations exciter, which is electrohydraulic device designed to extorting bi-axial vibrations. The priority task of exciter is to excite physical model with related to exploitations real conditions parameters of signals The building of working device and his important assemblies are described. The most important part of exciter is electrohydraulic control system which ensures the obtainment of required parameters of generated signal. Exciter is compound from: mechanical construction, two servomechanisms, station of hydraulic power supply, electric power supply and control system. The possibility of built device with can extorting vibrations of horizontal platform both in one, as in two axis was introduced. For end the results after two years of exploitation were showed.
This paper concerns a hybrid vibration reduction system (HVRS) equipped with a linear electrodynamic motor (LM). The objective of the study was to implement the HVRS in a scaled vehicle suspension and reveal the benefits of its application in the system. First, a mathematical model of a quarter-vehicle suspension with the HVRS was formulated. Next, the dynamic similarity method was employed to conduct numerical simulations of the passive vibration reduction system (PVRS). Subsequently, an algorithm for HVRS controlling was developed. Then, the system was investigated experimentally under deterministic and random excitations. The results confirmed the effectiveness and applicability of the proposed HVRS.
The study aimed to present the features of a 2-DOF vibration reduction system (VRS) equipped with a linear electrodynamic motor in passive, semi-active and active mode. At first, the VRS model was formulated. Then, simulation tests of the VRS were conducted to distinguish its most advantageous features in each mode and to analyze dynamic performance and energy consumption. Next, the VRS was experimentally tested to evaluate its effectiveness in each mode for the assumed excitations and to compare tests results against simulation data. In active mode, a sliding mode algorithm was employed for motor control, while in semi-active mode, the equivalent damping coefficient analysis was used.