Pavan Cornelissen

Mr. Pavan Cornelissen

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 February 2024 in Journal of Geophysical Research: Solid Earth
Verified
Journal Article
Open access
PCPavan Cornelissen
Pavan Cornelissen
BMBernard Meulenbroek
Bernard Meulenbroek
JJJ. D. Jansen
J. D. Jansen
We critically review the derivation of closed‐form analytical expressions for elastic displacements, strains, and stresses inside a subsurface reservoir undergoing pore pressure changes using inclusion theory. Although developed decades ago, inclusion theory has been used recently by various authors to obtain fast estimates of depletion‐induced and injection‐induced fault stresses in relation to induced seismicity. We therefore briefly address the current geomechanical relevance of this method, and provide a numerical example to demonstrate its use to compute induced fault stresses. However, the main goal of our paper is to correct some erroneous assumptions that were made in earlier publications. While the final expressions for the poroelastic stresses in these publications were correct, their derivation contained conceptual mistakes due to the mathematical subtleties that arise because of singularities in the Green's functions. The aim of our paper is therefore to present the correct derivation of expressions for the strains and stresses inside an inclusion and to clarify some of the results of the aforementioned studies. Furthermore, we present two conditions that the strain field must satisfy, which can be used to verify the analytical expressions.

10 October 2023 in Transport in Porous Media
Verified
Journal Article
Open access
PDF file
PCPavan Cornelissen
Pavan Cornelissen
JJJan-Dirk Jansen
Jan-Dirk Jansen
We consider steady-state single-phase confined flow through a subsurface porous layer containing a displaced, fully conductive fault causing a sudden jump in the flow path, and we employ (semi-)analytical techniques to compute the corresponding pressures and fault stresses. In particular, we obtain a new solution for the pressure field with the aid of conformal mapping and a Schwarz–Christoffel transformation. Moreover, we use an existing technique to compute the poro-elastic stress field with the aid of inclusion theory. The additional resistance to fluid flow provided by a displaced fault, relative to the resistance in a layer without a fault, is a function of dip angle, fault throw divided by reservoir height, and reservoir width divided by reservoir height. Fluid flow has a larger effect on fault stresses in case of injection than in case of depletion, where injection with up-dip flow results in increased zones of fault slip near the bottom of the reservoir. Opposedly, injection with down-dip flow results in increased slip near the top of the reservoir. An order-of-magnitude estimate of the effect of steady-state flow across displaced faults in the Groningen natural gas reservoir shows that the effect on fault stresses is probably negligible. A similar estimate of the effect in low-enthalpy geothermal doublets indicates that steady-state flow may possibly play a small role, in particular close to the injector, but site-specific assessments will be necessary to quantify the effect.

1 January 2020 in Vadose Zone Journal
Verified
Journal Article
Open access
PDF file
PCPavan Cornelissen
Pavan Cornelissen
SZSjoerd E. A. T. M. van der Zee
Sjoerd E. A. T. M. van der Zee
ALAnton Leijnse
Anton Leijnse
Marginal water, like treated effluent or other types of wastewater, induces contaminant accumulation in different environmental compartments such as soil and groundwater. With a root zone model and daily rainfall data as input, accumulation in the case of two different degradation concepts was modeled: (I) the solute degrades only in the solution phase, and (II) the solute degrades in both the solution and the adsorption phase. For linear adsorption, both degradation concepts not only yield similar results, but adsorption does not affect the long‐term concentration. This can be readily explained with the governing equations. For nonlinear adsorption, the degradation concept does affect the concentration and fluxes. When the first concept is valid, the long‐term concentration is not affected by adsorption, whereas the short‐term and fluctuations are. For the second degradation concept, the long‐term average concentration and fluxes are also affected by adsorption. A correction factor was derived to correct the analytical solution of the time‐dependent concentration of nonlinearly adsorbing solutes. For all scenarios, reasonable estimates of the long‐term concentration could be obtained with analytical models for most parameter combinations, which can be used to identify contaminant species that should be prioritized for further research.

23 April 2021 in Water
Verified
Journal Article
Open access
PDF file
PCPavan Cornelissen
Pavan Cornelissen
SZSjoerd Van Der Zee
Sjoerd Van Der Zee
ALAnton Leijnse
Anton Leijnse
The use of marginal water, such as reclaimed wastewater or effluent, for irrigation can reduce the pressure on existing freshwater resources. However, this can cause contaminants to accumulate in compartments such as the soil, crop, air, surface- and groundwater, which may harm the public health and the environment. Environmental quality standards for these compartments are generally considered separately. However, the compartments are related to each other by the fluxes between them, and the concept of sustainability should hold for all compartments simultaneously. An integrated approach is therefore required for the sustainability assessment of irrigation with marginal water. Since such an approach has not been provided yet, we develop an integrated framework in this study. We provide sustainability indicators by comparing the long-term contaminant concentration and fluxes with quality standards for each environmental compartment. These indicators give comprehensible information on which contaminants will cause problems, which environmental compartments are threatened, and on what timescale this will occur. This allows for the prioritization of mitigation and preventive measures for better sustainability management. We illustrate the use of the framework by means of a case study.

10 March 2020
Verified
Conference Paper
Open access
PCPavan Cornelissen
Pavan Cornelissen
ALAnton Leijnse
Anton Leijnse
VJVahid Joekar-Niasar
Vahid Joekar-Niasar
SZSjoerd van der Zee
Sjoerd van der Zee
Some porous media such as clay have charged surfaces. The presence of these charged surfaces results in a complex system where water flow, salt transport, and the electric field are coupled. This system is important in many fields, such as geotechnical engineering, storage of radioactive waste in clay barriers, enhanced oil recovery, and irrigation with marginal water. The charged surfaces alter the transport properties of ions. For example, clay minerals are often negatively charged due to isomorphous substitution. Cations are therefore attracted to the mineral surface, while anions are repelled, creating a diffuse double layer around the clay particle. Cations are therefore transported preferably over anions through such charged pores. To conserve electroneutrality, a streaming potential develops to counteract diffusion by electromigration. This results in smaller effective diffusion coefficients compared to uncharged porous media. We developed a pore-network model to quantify the effect of the double layer processes on the effective diffusion coefficient. Pore-network models are a suitable tool to include the heterogeneity of pore sizes and surface charge densities seen in nature. In pore-network modeling, the geometry of the pore space is simplified, but the network properties are based on realistic statistics such as pore size distribution and connectivity. The larger scale behavior can be identified by averaging over a large number of pores. The results were strongly dependent on the salinity, as this controls the thickness of the double layers. At high salt concentrations, the diffuse double layer is thin and the differences between charged and uncharged porous media are negligible. However, at low salinity, the double layers are thick and the effective diffusion coefficient of salt was reduced by 25% in charged porous media compared to uncharged porous media, due to salt transport being slowed down to conserve electroneutrality. Hence, the presence of charged mineral surfaces can significantly alter transport rates under low salinity conditions.

20 January 2025
Verified
Conference Paper
Open access
PCPavan Cornelissen
Pavan Cornelissen
LWLouise Wipfler
Louise Wipfler
MBMaarten Braakhekke
Maarten Braakhekke
MHMarius Heinen
Marius Heinen
Soil properties such as the dry bulk density and soil hydraulic parameters can significantly affect the environmental fate of pesticides. These properties are often assumed to remain constant in time in numerical models. In reality, however, these properties change over time due ploughing and consolidation. In this study, we modeled the time-varying soil properties induced by ploughing and consolidation and assessed its effect on pesticide accumulation in the topsoil and leaching to the groundwater. For this purpose, time-dependent soil properties have been implemented in the hydrological model SWAP and the pesticide fate model PEARL. Ploughing instantaneously decreases the bulk density, after which it gradually increases again to its original value due to consolidation caused by rainfall. The time-dependent soil properties are modelled based on empirical relationships between the dry bulk density and the Mualem-Van Genuchten parameters found in the literature.Ploughing leads to a short-term deviation of the soil water content and concentration compared to the reference case (i.e., the case with constant soil properties). We included mixing of pesticide over the ploughing layer due to ploughing in both cases. However, under Central European climate conditions, the effect of ploughing vanishes within several months in the entire soil profile. For assessing the impact on the leaching of pesticide to groundwater, we evaluated the pesticide concentration in pore water at 1 meter depth. The effect of time-varying soil properties due to ploughing and consolidation on the leaching concentration was found to be small for both a tracer and an adsorbing solute. Even for an extreme case with three ploughing events per year, the effect on the 90th-percentile of daily leaching concentration was smaller than 0.3%. For assessing the impact on the exposure of soil organisms to pesticides, we considered the pesticide concentration in pore water averaged over the upper 20 centimeters of the soil. For the tracer, ploughing resulted in a 1.2% decrease of the 90th-percentile of daily topsoil concentration data for the extreme case of three ploughing events per year. Interpretation of the results for adsorbing solutes in the topsoil is hampered by the fact that soil mass is not conserved in the current approach. More advanced models must be developed that allow for conservation of soil mass for assessing the impact of time-dependent soil properties on concentrations in the topsoil.