Defects in castings often appear unexpectedly and it is difficult to identify their source as they can be brought about by a large number of randomly changing production parameters. Artificial neural networks were used for detection of the causes of gas porosity defects in steel castings. The applied procedure included systematic storing of two types of information: about the process parameters, materials used and even employees involved in the production (as the network inputs) and about the appearance of a given defect (as the network output). The trained network was able to detect interdependences among various factors influencing water vapour pressure in the mould and thus to indicate the most probable cause of porosity.
The results presented in this paper are a continuation of the previously published studies. The results of hest treatment of ductile iron with content 3,66%Si and 3,80% Si were produced. The experimental castings were subjected to austempering process for time 30, 60 and 90 minutes at temperature 300°C. The mechanical properties of heat treated specimens were studied using tensile testing and hardness measurement, while microstructures were evaluated with conventional metallographic observations. It was again stated that austempering of high silicone ferritic matrix ductile iron allowed producing ADI-type cast iron with mechanical properties comparable with standard ADI.