The derivation of a conventional error model for the miniature gyroscope-based measurement while drilling (MGWD) system is based on the assumption that the errors of attitude are small enough so that the direction cosine matrix (DCM) can be approximated or simplified by the errors of small-angle attitude. However, the simplification of the DCM would introduce errors to the navigation solutions of the MGWD system if the initial alignment cannot provide precise attitude, especially for the low-cost microelectromechanical system (MEMS) sensors operated in harsh multilateral horizontal downhole drilling environments. This paper proposes a novel nonlinear error model (NNEM) by the introduction of the error of DCM, and the NNEM can reduce the propagated errors under large-angle attitude error conditions. The zero velocity and zero position are the reference points and the innovations in the states estimation of particle filter (PF) and Kalman filter (KF). The experimental results illustrate that the performance of PF is better than KF and the PF with NNEM can effectively restrain the errors of system states, especially for the azimuth, velocity, and height in the quasi-stationary condition.
18 November 2022 in IEEE Transactions on Industrial Informatics
Next-generation industrial edge artificial intelligence (AI) applications will undoubtedly emerge on energy-efficient, highly-integrated platforms incorporating various sensors, processors, and functional modules. Embedding the data quantization module onto edge AI chips, connecting sensors, processors, and functional modules is critical to achieving adaptive transformation of diverse data representation formats. This paper proposes a novel adaptive and low-power quantization technique and systematically validates its effectiveness from algorithm to hardware module for industrial IoT applications, covering precise navigation for autonomous vehicles and accurate classification utilizing deep neural networks (DNNs). The proposed quantization method merges an adaptive conversion function from floating-point to fixed-point binaries and an adaptive radix-point determination function, ensuring adequate resolution and minimal error loss of the fixed-point inputs to the edge AI modules. The experimental results demonstrate that the quantization error in the proposed quantization technique contributes negligible errors to the navigation solutions of the strapdown inertial navigation system and the DNNs' top-1 and top-5 classification accuracy (on the order of 10 $^{-8}$ and 10 $^{-7}$ ). Moreover, a quantization-on-multiplier (QoM) hardware module is designed, synthesized, and routed in accordance with the proposed quantization technique. The simulation results indicate that the QoM's power consumption and area are 0.1 mW and 649.552 $\mu \text{m}^{2}$ , accounting for 5% and 14.15% of its total energy consumption and area, respectively. With our proposed on-chip quantization technique, the time required to quantize the parameters of DNNs is up to 1142 times shorter than with the existing benchmark off-chip quantization approaches.
In this research, based on the principle of optical interferometry, the Mach-Zehnder and Optical Phase-locked Loop (OPLL) vibro-perception systems of bio-inspired fiber-skin are designed to mimic the tactile perception of human skin. The fiber-skin is made of the optical fiber embedded in the silicone elastomer. The optical fiber is an instinctive and alternative sensor for tactile perception with high sensitivity and reliability, also low cost and susceptibility to the magnetic interference. The silicone elastomer serves as a substrate with high flexibility and biocompatibility, and the optical fiber core serves as the vibro-perception sensor to detect physical motions like tapping and sliding. According to the experimental results, the designed optical fiber-skin demonstrates the ability to detect the physical motions like tapping and sliding in both the Mach-Zehnder and OPLL vibro-perception systems. For direct contact condition, the OPLL vibro-perception system shows better performance compared with the Mach-Zehnder vibro-perception system. However, the Mach-Zehnder vibro-perception system is preferable to the OPLL system in the indirect contact experiment. In summary, the fiber-skin is validated to have light touch character and excellent repeatability, which is highly-suitable for skin-mimic sensing.
13 February 2023 in Neural Computing and Applications
Deep neural networks (DNNs) have delivered unprecedented achievements in the modern Internet of Everything society, encompassing autonomous driving, expert diagnosis, unmanned supermarkets, etc. It continues to be challenging for researchers and engineers to develop a high-performance neuromorphic processor for deployment in edge devices or embedded hardware. DNNs’ superpower derives from their enormous and complex network architecture, which is computation-intensive, time-consuming, and energy-heavy. Due to the limited perceptual capacity of humans, accurate processing results from DNNs require a substantial amount of computing time, making them redundant in some applications. Utilizing adaptive quantization technology to compress the DNN model with sufficient accuracy is crucial for facilitating the deployment of neuromorphic processors in emerging edge applications. This study proposes a method to boost the development of neuromorphic processors by conducting fixed-point multiplication in a hybrid Q-format using an adaptive quantization technique on the convolution of tiny YOLO3. In particular, this work integrates the sign-bit check and bit roundoff techniques into the arithmetic of fixed-point multiplications to address overflow and roundoff issues within the convolution’s adding and multiplying operations. In addition, a hybrid Q-format multiplication module is developed to assess the proposed method from a hardware perspective. The experimental results prove that the hybrid multiplication with adaptive quantization on the tiny YOLO3’s weights and feature maps possesses a lower error rate than alternative fixed-point representation formats while sustaining the same object detection accuracy. Moreover, the fixed-point numbers represented by Q(6.9) have a suboptimal error rate, which can be utilized as an alternative representation form for the tiny YOLO3 algorithm-based neuromorphic processor design. In addition, the 8-bit hybrid Q-format multiplication module exhibits low power consumption and low latency in contrast to benchmark multipliers.
26 February 2024 in IEEE Transactions on Industrial Informatics
This article proposes a novel error correction code (ECC) module designed for future object recognition systems that are expected to utilize spin-transfer torque MRAM (STT-MRAM) for weight data storage. The module focuses on achieving high throughput and a small area while ensuring the integrity of the data. A pipelined high-parallel Bose–Chaudhuri–Hocquenghem (BCH) module is proposed to address the high throughput requirement of the ECC module in STT-MRAM. A 64-parallel linear feedback shift register for the encoder and parallel factor reduced decoder are proposed to optimize the small area requirement, however, maintain the read delay within the nanosecond level. Code length and correction capability of BCH codes are optimized, which are feasible to object recognition systems with high efficiency of memory redundancy and computational complexity. The ECC's correction performance is verified using error maps obtained from practical measurements of real-working STT-MRAM chips fabricated using 37 nm MTJ/40 nm CMOS technologies. The implementation results demonstrate that the proposed ECC module achieved the highest throughput of 64 ${bit} \cdot {{f}}_{{clk}}$ and a small area of 18.27K $\mu {\mathrm{m}}^2$ with a read latency of 5.76 ns. Practical experiments utilized error maps of STT-MRAM and MobileNet weight dataset based on CNN to verify the proposed ECC. Experiment results demonstrated the proposed ECC module achieved no accuracy degradation when the bit error rate of STT-MRAM is under 2×10 -3 for neural networks.
In the recent years horizontal drilling (HD) has become increasingly important in oil and gas exploration because it can increase the production per well and can effectively rework old and marginal vertical wells. The key element of successful HD is accurate navigation of the drill bit with advanced measurement-while-drilling (MWD) tools. The size of the MWD tools is not significantly restricted in vertical wells because there is enough space for their installation in traditional well drilling, but the diameter of devices for HD must be restricted to less than 30 mm for some applications, such as lateral drilling from existing horizontal wells. Therefore, it is essential to design miniature devices for lateral HD applications. Additionally, magnetometers in traditional MWD devices are easily susceptible to complex downhole interferences, and gyroscopes have been previously suggested as the best avenue to replace magnetometers for azimuth measurements. The aim of this paper is to propose a miniature gyroscope-based MWD system which is referred to as miniature gyroscope-based while drilling (MGWD) system. A prototype of such MGWD system is proposed. The device consists of a two-axis gyroscope and a three-axis accelerometer. Miniaturization design approaches for MGWD are proposed. In addition, MGWD data collection software is designed to provide real-time data display and navigation algorithm verification. A fourth-order autoregressive (AR) model is introduced for stochastic noise modeling of the gyroscope and the accelerometer data. Zero velocity and position are injected into a Kalman filter as a system reference to update system states, which can effectively improve the state observability of the MGWD system and decrease estimation errors. Nevertheless, the azimuth of the proposed MGWD system is not observable in the Kalman filter, and reliable azimuth estimation remains a problem.