Michael Ofem

Dr. Michael Ofem


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2021 in Energy Reports
Verified
Journal Article
Open access
FAFidelis I. Abam
Fidelis I. Abam
EEEkwe B. Ekwe
Ekwe B. Ekwe
Ogheneruona DiemuodekeOgheneruona Diemuodeke
Ogheneruona Diemuodeke
MOMichael Ofem
Michael Ofem
BOBassey B. Okon
Bassey B. Okon
WUWisdom E. Ukueje
Wisdom E. Ukueje

8 August 2012 in Journal of Materials Science Research
Verified
Journal Article
Open access
PDF file
MOMichael Ofem
Michael Ofem
MUMuneer Umar
Muneer Umar
FOFriday Aje Ovat
Friday Aje Ovat
The need to have composite materials that are renewable has lead to materials scientists researching on natural fibres. To minimize environmental pollution research into rice husk has been on for a period of time now. In this research cashew nut resin reinforced rice husk composite was fabricated at different particle sizes and different filler loading. The present study reveals that both filler loading and particle size can affect the tensile strength, young modulus, strain at failure, flexural strength, and impact strength. As the % filler content increases all particle sizes (400µm, 600µm and 800µm) shows a quadratic relationship except % elongation at failure which tends to be linear at 400µm. As particle size increases all % filler content shows quadratic relationship which tends to be linear. As particle sizes increases impact strength for 10 and 30% shows a linear equation while 20% shows a quadratic relationship which tends to be linear. In general, RH/CNSR composite could be considered as a potential source of low cost, natural fibre for composites.

26 November 2018 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Verified
Journal Article
Closed access
FAFidelis Abam
Fidelis Abam
TBTobinson A. Briggs
Tobinson A. Briggs
EEEkwe B. Ekwe
Ekwe B. Ekwe
CKC. G. Kanu
C. G. Kanu
SESamuel Oliver Effiom
Samuel Oliver Effiom
MOMichael Ofem
Michael Ofem
A thermodynamic modification of an ORC integrated with turbine bleeding and regeneration (ORCTBR) is presented. The objective is to modify the ORCTBR for both cooling and power generation (ORCNOV). First, a thermodynamic break down of the components based on exergy was performed followed by a sensitivity analysis. The results indicate that at based conditions the maximum efficiency obtained with ORCNOV was about 52% using R245fa at a heat input of 252 kW. The improvement in efficiency was estimated at 7.2% when compared with ORCTBR. The highest cooling rate was achieved using R1234yf, R245fa, and R1234ze by 11.14, 10.60, and 10.11 kW, respectively. Additionally, the ORCNOV showed improved performance in turbine output power of approximately 2%. However, the sensitivity studies show that the exergy destruction gap was not greater than 45% between the ORCTBR and ORCNOV, and high cooling rates are feasible at increased condenser (1) pressure.

16 July 2020 in Nigerian Journal of Technology
Verified
Journal Article
Closed access
PDF file
MOMichael Ofem
Michael Ofem
EEE.B. Ene
E.B. Ene
PUP.A. Ubi
P.A. Ubi
SOS.O. Odey
S.O. Odey
DFD.O. Fakorede
D.O. Fakorede
This paper provides a review of cellulose, sources, extraction, molecular structure, cellulose whiskers, preparations, and morphology. The mechanical and thermal properties of cellulose reinforced composites are also discussed. Detail structure of Nano whiskers is also reported. As a renewable biomaterial, the most common source of cellulose is the plant. These plants include fruit fibers (coir), seed fibers (cotton), wood, leaf fibers (sisal), bast fibers (jute, kenaf, and hemp). Other sources of cellulose are from micro-organisms such as fungi, tunicates, bacteria, and algae. Cellulose whiskers are isolated from cellulose fibers by acid hydrolysis. Cellulose micro fibril structures are made of both amorphous and crystalline regions. The amorphous regions are vulnerable to hydrolysis by acids compared to the crystalline domains. Several techniques among which are Field Emission Scanning Electron Microscopy (FESEM), Transmission electron microscopy (TEM) and Atomic Force Microscopy (AFM) have been used to study the morphology of cellulose whiskers. An interface between cellulose whisker and matrix is a transition zone between the matrix and the cellulose whiskers. It plays an important role in the overall mechanical properties of the composites. A soft interface domain will yield a greater resistance to fracture, while the composite will be low in stiffness and strength. On the other hand, a stiffer interface domain may cause the composite to be strong and stiff and less resistant to fracture. The addition of CW into polymers matrices has little or no effect on the glass transition temperature, (Tg) except on the modification of CW. Keywords: Cellulose, whiskers, mechanical, thermal, properties, biomaterials

7 March 2018 in Journal of Materials Science
Verified
Journal Article
Closed access
PDF file
MOMichael Ofem
Michael Ofem

1 September 2017 in Materials Discovery
Verified
Journal Article
Closed access
MOMichael Ofem
Michael Ofem