The paper presents an analytical investigation of the effect of vertical ground motion on the selected 13 reinforced concrete (RC) frames with different geometric configurations. For this purpose, earthquake ground motions with various vertical‐to‐horizontal peak acceleration ratios are selected to which a suitable scale factor is applied to match with seismic hazards of Korea. The methodology involves the evaluation of the structural responses of RC frames subjected to the selected records by means of nonlinear time history analyses. The results from the analysis are compared with results from studies of the case of horizontal‐only excitation. The effect of the vertical earthquake component on damage of RC frames is considered at both the global and the local levels. The effect of vertical ground motion on axial force, shear demand, and shear capacity of RC columns is investigated to assess failure on a local level. In particular, the shear capacity is evaluated by using both the conservative method of a design code and more realistic predictive approaches. The results of the extensive analyses indicate that vertical ground motion can significantly affect the response of RC members in terms of axial force variation and shear capacity. These results point to the conclusion that vertical ground motion needs to be included in analysis for assessment and design.

This paper evaluates the effect of construction quality defects on the seismic vulnerability of reinforced concrete (RC) frames. The variability in the construction quality of material properties and structural detailing is considered to assess the effect on the seismic behavior of RC frames. Concrete strength and yield strength of the reinforcement are selected as uncertain variables for the material properties, while the variabilities in the longitudinal reinforcement ratio and the volumetric ratio of transverse reinforcement are employed for structural detailing. Taking into account the selected construction quality uncertainties, the sensitivity analysis of the seismic vulnerability of the RC frames is performed and the impact of significant parameters is assessed at the global and local levels. This extensive analytical study reveals that the seismic vulnerability of the selected RC frame is particularly sensitive to concrete strength and the volumetric ratio of transverse reinforcement.

The paper investigates the seismic performance of rectangular RC columns retrofitted by a newly developed 3D Textile Reinforced Mortar (TRM) panel. The 3D-TRM used in this study consists of two components: self-leveling mortar and 3D textiles. Firstly, the flexural capacity of the 3D-TRM panel was investigated through the four-point flexural test. Secondly, a total of five specimens were constructed and experimentally investigated through static cyclic loading tests with constant axial load. One specimen was a non-seismically designed column without any retrofit, while the others were strengthened with either the 3D-TRM panel or conventional Fiber Reinforced Polymer (FRP) sheets. Experimental results in terms of hysteretic behavior, ductility ratio, and energy dissipation are investigated and compared with the cases of specimens with conventional retrofitting methods and without any retrofit. The maximum lateral force, ductility, stiffness degradation, and energy dissipation of RC columns with 3D-TRM panels were significantly improved compared with the conventional RC column. Therefore, it is concluded that the proposed retrofitting method can improve the seismic performance of non-conforming RC columns.